0
$0.00
WATER RESISTANT, POLYMER MODIFIED, CEMENTITIOUS TILE GROUT Composition:- Cement, polymers, fillers and additives MORE DESCRIPTION SikaCeram®-502 TG AE is a 1-component, polymer modified and water resistant cementitious tile grout for joints of up to 6 mm. It is particularly used in conjunction with SikaCeram® tile adhesives. Suitable for use in hot and tropical climatic conditions. USES SikaCeram®-502 TG AE is suitable for grouting joints in: ▪ Ceramic tiles ▪ Suitable for indoor and outdoor application ▪ Brick, marble and stone ▪ Terrazzo CHARACTERISTICS / ADVANTAGES ▪Easy to use ▪Requires only the addition of water:- ▪Long open time (enough time to clean residues from the tiles after application) ▪ Hardens without cracking or shrinkage ▪ Water-repellent and impermeable to many liquids ▪ Good abrasion resistance ▪ Very good adhesion to unglazed surfaces ▪ Available in various colours ▪ Mould-inhibiting and fungicide ▪ UV resistant APPROVALS / CERTIFICATES SikaCeram®-502 TG AE complies to requirements of EN 13888 for class CG2 A and follows the main requirements of ANSI 118.6 for standard unsanded cement grout and compressive strength for ANSI 118.7. Packaging 5 kg plastic bag 20 kg paper bag For more information https://gcc.sika.com/content/dam/dms/gcc/1/sikaceram-502-tgae.pdf
Original price was: $13.78.$12.25Current price is: $12.25.Add to cart
Free flowing micro-concrete for grouting and repair Mixture of Portland Cement and graded aggregates Product Description Sikacrete® 112 one component, free-flowing, high strength, cement based microconcrete with a maximum aggregate size of 5 mm. Suitable for use in tropical and hot climatic conditions. Uses Sikacrete® 112 used for the structural repair of deteriorated concrete. It is ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. A typical application is the re-profiling of damaged concrete members, using formwork. Also suitable for base plate grouting where thickness exceeds 75 mm. Characteristics / Advantages One component, requires the addition of water only Reduced waste and risk of mixing failures Easy to mix, apply and finish Economical Excellent adhesion Shrinkage compensated Rapid strength development Compatible with the properties of typical concrete Vapour permeable High resistance to freeze/thaw cycling
Original price was: $13.31.$12.25Current price is: $12.25.Read more
FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR Composition:- Portland cement, selected fillers and aggregates, special additives. DESCRIPTION Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete. Suitable for use in hot and tropical climatic conditions. USES Sikacrete®-114 SA is used for the structural repair of deteriorated concrete. ▪ Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. ▪ A typical application is the re-profiling of damaged concrete members, using formwork. ▪ Suitable for base plate grouting where thickness exceeds 100 millimetre. ▪ Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump CHARACTERISTICS / ADVANTAGES ▪ One component, requires the addition of water only ▪ Reduced waste and risk of mixing failures ▪ Easy to mix, apply and finish ▪ Economical ▪ Excellent adhesion ▪ Shrinkage compensated ▪ Rapid strength development ▪ Compatible with the properties of typical concrete ▪ Vapour permeable For more information https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf
Original price was: $17.84.$16.84Current price is: $16.84.Add to cart
EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance Packaging Part A: 4 kg container Part B: 2 kg container (A + B) 6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf
Original price was: $59.63.$55.90Current price is: $55.90.Add to cart
HIGH-MODULUS, HIGH-STRENGTH, EPOXY BONDING/GROUTING ADHESIVE Chemical Base:- 100 % epoxy PRODUCT DESCRIPTION Sikadur®-32 Hi-Mod is a multi-purpose, 2-component, 100 % solids, moisture-tolerant structural epoxy adhesive. It conforms to the current ASTM C-881 Types I, II, and V, Grade 2, Class C and AASHTO M-235 specifications. USES Sikadur®-32 Hi-Mod may only be used by experienced professionals. Bond fresh, plastic concrete to hardened concrete and steel. ▪Grout horizontal cracks in structural concrete and wood by gravity feed. ▪ Machinery and ‘robotic’ base-plate grout. ▪Structural adhesive for concrete, masonry, metal, wood, etc CHARACTERISTICS / ADVANTAGES ▪ High-strength bonding/grouting adhesive. ▪ Tolerant to moisture before, during and after cure. ▪ Excellent adhesion to most structural materials. ▪ Convenient easy-to-mix ratio A:B = 1:1 by volume. ▪ Easy-to-use for bonding/grouting applications. ▪ Fast initial set; rapid gain to ultimate strengths. ▪ USDA-certified for use in food plants. For more information https://usa.sika.com/content/dam/dms/us01/7/pds-cpd-Sikadur32HiMod-us.pdf
Original price was: $97.17.$93.17Current price is: $93.17.Add to cart
3-PART, MULTI PURPOSE EPOXY GROUTING SYSTEM Composition:- Epoxy resin DESCRIPTION Sikadur®-42 MP Slow is a three-component, multipurpose, moisture tolerant, epoxy grouting system. Suitable for use in hot and tropical climatic conditions. USES Sikadur®-42 MP Slow may only be used by experienced professionals. High-strength grouting and fixing of: ▪ Starter bars ▪ Anchors ▪ Fasteners ▪ Tie rods ▪ Crash barrier posts ▪ Fence and railing posts ▪Under-grouting and bedding of: 1- Base plates 2- Machine bases, seat base-plates for light and heavy 3- Machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. ▪ Bridge bearings ▪ Mechanical joints (i.e. road/bridge/deck types etc.) ▪Sleeper-less, direct rail fixing: ▪ Crane tracks ▪ Light rail and permanent way in tunnels ▪ Light rail and permanent way over bridges CHARACTERISTICS / ADVANTAGES ▪ High early strength ▪ Ready-to-mix, pre-batched units ▪ Moisture tolerant ▪ Non-shrink ▪ Corrosion and chemically resistant ▪ Stress and impact resistant ▪ High compressive strength ▪ High vibration resistance ▪ Low coefficient of thermal expansion APPROVALS / CERTIFICATES ▪ Testing according to EN 1504-6. For more information https://gcc.sika.com/content/dam/dms/gcc/f/sikadur_-42_mp_slow.pdf
Original price was: $425.94.$393.99Current price is: $393.99.Add to cart
Sikaflex® PRO-3 1-part high performance civil engineering joint sealant Sikaflex® PRO-3 is a 1-component, moisture-curing, elastic joint sealant with high mechanical and chemical resistance. Suitable for use in hot and tropical climatic conditions. Usage Sikaflex® PRO-3 is designed for movement and connection joints in floors, pedestrian and traffic areas (example: parking decks, car parks), warehouses and production areas, applications in the food industry, sewage treatment plants, tunnel construction and in clean rooms. It can be used for vertical and overhead joints. Advantages Movement capability of ± 35 % (ASTM C 719) Very high mechanical and chemical resistance Bubble-free curing Good adhesion to most construction materials Jet fuel and diesel resistance Solvent-free Very low emissions I-CURE TECHNOLOGY Polyurethane Resistant to dilute alkalis and salt water Multifunctional joint filler suitable for use in various fields such as: Floors of food factories, workshops, industrial places, pedestrian and traffic areas Indoor and outdoor floors Horizontal and vertical Moisture treatment Car parks, warehouses and commercial halls Floors exposed to chemicals Water and sewage treatment plants Resistant to high water pressures (3 bar) after drying. Good mechanical and chemical resistance Excellent adhesion strength to most construction materials Highly flexible and used in tunnels and suspension bridges Packaging 600 mL foil pack, 20 foil packs per box Colour Concrete grey (further colours available upon request) SUSTAINABILITY Sikaflex® PRO-3 conforms to LEED® EQc 4.1 VOC content < 30 g/l (US EPA method 24) EMICODE EC1PLUS R SCAQMD, Rule 1168 BAAQMD, Regulation. 8, Rule 51 APPROVALS / CERTIFICATES ASTM C 920, class 35 ISO 11600 F 25 HM EN 15651-4 PW EXT-INT CC 25 HM ISEGA Certificate for foodstuff area usage BS 6920 (drinking water contact) ASTM C 1248 non-staining on marble ISO 16938-1 non-staining on marble CSM TVOC tested (ISO -6.8) CSM biological resistant: very good Tested according principals of DIBt for Waste Water Exposure Resistance against Diesel and Jet Fuel according to the DIBt guidelines
Original price was: $11.18.$10.12Current price is: $10.12.Add to cart
Sikaflex®-11 FC+ Multipurpose elastic adhesive and joint sealant Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Internal and external use. USES An adhesive to bond construction components and materials such as: ▪ Concrete ▪ Masonry ▪ Reconstituted or cast stone ▪ Ceramic ▪ Wood ▪ Metal ▪ Glass A sealant to seal vertical and horizontal joints. CHARACTERISTICS / ADVANTAGES Movement capability of ±35 % Bonds well to defined substrates without surface pre-treatment Good mechanical and weathering resistance Very low emissions Adhesive-sealant with CE marking SUSTAINABILITY Sikaflex®-11 FC+ is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL18020589 ▪ Conformity with LEED v4 EQc 2: Low-Emitting Materials ▪ IBU Environmental Product Declaration (EPD) available ▪ VOC emission classification GEV-Emicode EC1PLUS, license number 2782/20.10.00 ▪ Class A+ according to French Regulation on VOC emissions Packaging 300 ml cartridge 12 cartridges per box 600 ml cylindrical foil pack 20 foil packs per box Refer to current price list for packaging variations For more information click the link https://gcc.sika.com/content/dam/dms/gcc/o/sikaflex_-11_fc_.pdf
Original price was: $11.18.$9.85Current price is: $9.85.Add to cart
2-PART EPOXY PRIMER, LEVELLING MORTAR AND INTERMEDIATE LAYER USES AND CHARACTERISTICS / ADVANTAGES Sikafloor®-161 may only be used by experienced professionals. For priming concrete substrates, cement screeds and epoxy mortars ▪For low to medium absorbent substrates ▪ Primer for the Sikafloor®-263 SL, Sikafloor®-264 economic flooring systems and Sikalastic®-800 series ▪ Binder for levelling mortars and mortar screeds ▪Intermediate layer underneath Sikafloor®-263 SL and Sikafloor®-264 ▪ Low viscosity ▪ Excellent bond strength ▪ Short waiting times ▪ Multi-purpose Sikafloor®-161 is an economic, two part, low viscosityepoxy resin. Suitable for use in hot and tropical climatic conditions. ▪High quality epoxy primer for interior and exterior floors Primer composed of (A + B) ▪For preparing low and medium absorbent concrete substrates ▪A primer for economical flooring systems ▪Excellent bonding strength ▪Easy to apply with a roller multifunctional ▪It is used in concrete and natural stone Epoxy mortar ▪Self-leveling epoxy floor paint ▪Good penetration and adhesion ▪Primer for three compounds sikfloor 264, sikafloor 264 SG, and sikafloor 263 SL For more information https://gcc.sika.com/content/dam/dms/gcc/s/sikafloor_-161.pdf
Original price was: $207.64.$199.66Current price is: $199.66.Add to cart
2-PART HIGH PERFORMANCE , SOLVENT FREE , RESIN BASE EPOXY COATING DESCRIPTION Sikafloor®-264 is a two part coloured epoxy resin. "Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals)" USES Sikafloor®-264 may only be used by experienced professionals. Sikafloor®-264 is used as: ▪Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps. ▪ Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry ▪ Suitable to be used in different industrials such as Food & Beverage , Pharmaceuticals , Clean Rooms , Power Stations and Water plants . ▪ Mechanical rooms and Storage areas in adminstration buildings , exhibition halls and showrooms . CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Liquid proof ▪ Gloss finish ▪ Slip resistant surface possible ▪ Dust Proof Packaging Ready for use pre-proportioned units at 15 kg (A+B). For more information https://industry.sika.com/content/dam/dms/eg01/1/sikafloor_-264.pdf
Original price was: $216.96.$207.64Current price is: $207.64.Add to cart
HEAVY DUTY EPOXY RESIN FLOOR SCREED Composition Epoxy resin and selected natural aggregates DESCRIPTION Sikafloor®-190 Screed is a three component solventfree mortar screed based on epoxy resins and specially graded aggregates. Suitable for use in hot and tropical and climatic conditions. USES Sikafloor®-190 Screed may only be used by experienced professionals. Sikafloor®-190 Screed is used as a non-slip and abrasion resistant epoxy resin flooring screed in applications such as: ▪ Flooring subject to moderate or heavy loading ▪ Workshop and factory floors ▪ Machine shops and warehouses ▪ Depots and loading ramps ▪ Hangars ▪ Car parks with higher anticipated load ▪ Stairs CHARACTERISTICS / ADVANTAGES ▪ Easy and fast to apply ▪ Excellent adhesion to substrate ▪The screed may be mechanically smoothed using a plastic coated disk ▪ Non-slip, non-skid finish possible ▪ Excellent abrasion resistance ▪ High mechanical strength ▪ Permeable to water vapour ▪ Compatible with suitable Sikafloor® coatings Packaging Component A 2.41 kg unit Component B 0.50 kg unit Component C 25 kg bag
Original price was: $61.23.$58.17Current price is: $58.17.Add to cart
Mineral dry shake floor hardener Composition Natural mineral aggregates graded and mixed with cement, admixtures and pigments MORE DESCRIPTION Sikafloor®-3 QuartzTop is a mineral dry shake hardener for concrete comprising of cement, specially selected quartz mineral aggregates and admixtures USES Sikafloor®-3 QuartzTop may only be used by experienced professionals. Sikafloor®-3 QuartzTop provides a hard wearing, mineral dry shake topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a wear resistant smooth surface. Typical uses are in warehouses, factories, shopping, malls, public areas, where wear durable and wear resistant floor is the key requirement. CHARACTERISTICS / ADVANTAGES ▪ Medium wear resistance rating ▪ Impact resistance ▪ Cost effective surface hardener ▪ Dust proof ▪ Fast application ▪ Easy cleaning ▪ Increased resistance to oils and grease ▪ Quality assured factory blending ▪ Wide range of colours Packaging 25 kg bags For more information https://ken.sika.com/content/dam/dms/ke01/b/sikafloor_-3_quartztop.pdf
Original price was: $10.65.$9.58Current price is: $9.58.Add to cart
Chemical Resistant Epoxy Coating Composition:- Epoxy resin DESCRIPTION Sikagard® PW is a two component, solvent free epoxy coating with outstanding mechanical and chemical properties. Suitable for use in hot and tropical climatic conditions. USES Sikagard® PW may only be used by experienced professionals. ▪Chemical resistant protective layer on concrete, structural cementitious mortars, epoxy cement, epoxy resin based products and steel ▪Protection of concrete surfaces / foundations below ground level ▪ Lining in storage tanks, manholes, intakes and silos etc. ▪ Anti-corrosion coating on steel in food processing plants, sewage works, farms, agricultural enterprises, chemical and pharmaceutical facilities and beverage industry CHARACTERISTICS / ADVANTAGES ▪ Suitable for direct contact with potable water ▪ Easy to clean, tough glossy finish Very good resistance to a wide range of chemicals and corrosive vapours ▪ Sewage resistant ▪ Good mechanical and chemical resistance ▪ High build ▪ Impervious to liquids SUSTAINABILITY Sikagard® PW is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 For more information https://gcc.sika.com/dms/getdocument.get/8ea6fab1-e9ef-4b72-a1b5-00621830c5b1/sikagard_pw.pdf
Original price was: $174.37.$171.71Current price is: $171.71.Add to cart
CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT Composition :- Portland cement, selected fillers and aggregates, special additives DESCRIPTION SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength. Suitable for use in hot and tropical climatic conditions USES SikaGrout®-114 SA is used for grouting in the following: ▪ Machine foundations ▪ Columns in pre-cast construction ▪ Concrete anchors, cavities, gaps and recesses ▪ Base plates ▪ General concrete repairs ▪ Bridge bearing pads CHARACTERISTICS / ADVANTAGES SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial properties: ▪ Easy to mix ▪ Good flow characteristics ▪ Adjustable consistency ▪ High final strengths ▪ Non-corrosive and iron-free APPROVALS / CERTIFICATES Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C Packaging 25 kg bag For more information https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf
Original price was: $9.05.$8.52Current price is: $8.52.Add to cart
General Purpose cementitious grout Chemical Base:- Cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. USES ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out CHARACTERISTICS / ADVANTAGES ▪ Easy to use (ready to mix powder) ▪Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪Blend of shrinkage-reducing and plasticizing/waterreducing agents ▪ Low heat build-up ▪Excellent for pumping: does not segregate, even at high flow. ▪No build-up on equipment hopper ▪ Superior freeze/thaw resistance ▪ Resistant to oil and water APPROVALS / STANDARDS ▪ Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout®-212 is USDA certifiable Packaging 50 lb (22.7 kg) bag For more information https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf
Original price was: $34.00.$12.25Current price is: $12.25.Read more
CEMENTITOUS, HIGH EARLY STRENGTH, NON-SHRINK PRECISION GROUT Composition:- Portland cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-214 SA is a cementitious, free flowing, economical, non-shrink precision grout with high early and ultimate strength. Suitable for use in hot and tropical climatic conditions. USES SikaGrout®-214 SA precision grout is used for grouting in the following: ▪ Machine Foundations ▪ Columns in pre-cast construction ▪ Base plates ▪ Concrete anchors, cavities, gaps and recesses ▪ General concrete repairs ▪ Joint nosing ▪ Structural concrete repairs ▪ Bridge bearings CHARACTERISTICS / ADVANTAGES SikaGrout®-214 SA is an easy to use grout requiring only the addition of water. It offers the following beneficial properties: ▪ Easy to mix ▪ High early strength ▪ Good flow characteristics ▪ Non-shrink ▪ Adjustable consistency ▪ High final strengths ▪ Non-corrosive and iron-free APPROVALS / CERTIFICATES Complies with CRD-C621-83-10.2 and ASTM C1107 as Type C Packaging 25 kg bag For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikagrout_-214_sa.pdf
Original price was: $13.31.$12.25Current price is: $12.25.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
