0
$0.00
2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing CHARACTERISTICS / ADVANTAGES Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance Packaging Component A: Component B: A+B set 0.800Kg 0.400 kg 1.2 kg 4 kg 2 kg 6 kg 8 kg 4 kg 12 kg For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_
Original price was: $25.56.$22.89Current price is: $22.89.Add to cart
2-part High-build Solvent Free Epoxy Coating - Pigmented epoxy resin DESCRIPTION Sikafloor®-264 SG is a two-part, high-build, solvent free, coloured epoxy resin. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-264 SG may only be used by experienced professionals. Sikafloor®-264 SG can be used as a: Roller coat for concrete and cement screeds with normal up to medium heavy wear for example storage and assembly halls, maintenance workshops, garages and loading ramps. A broadcast system for multi-storey and underground car parks, maintenance hangars and for wet process areas, for example beverage and food industry. CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Economical ▪ Liquid proof ▪ Gloss finish ▪ High Slip resistant surface when broadcasted ▪A two-component epoxy paint (A + B), solvent-free for construction and fixation ▪A colored paint applied by roller to cement surfaces ▪Gives a flat, hardened surface ▪The concentration of the epoxy is very high ▪It is applied to the internal surfaces ▪Applied in two stages or two layers 2 ▪Primer 161 is leveled and used in heavy duty places such as: ▪Garages and ground or multi-storey car parks ▪Factories ▪Maintenance workshops and loading ramps ▪Maintenance sheds ▪Wet processing areas such as beverage, food and pharmaceutical industries ▪Mechanical rooms and storage areas in administrative buildings, halls, exhibitions and showrooms such as commercial malls ▪Economical and liquid resistant ▪Non-slip, easy to clean and maintain For more information https://gcc.sika.com/content/dam/dms/gcc/2/sikafloor_-264_sg.pdf
Original price was: $199.66.$189.01Current price is: $189.01.Add to cart
2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT Composition OF Polyurethane DESCRIPTION Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-359 BH may only be used by experienced professionals. Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring ▪ Particularly suitable for car park decks, ramps and warehouses etc. CHARACTERISTICS / ADVANTAGES ▪ Tough-elastic ▪ UV resistant ▪ Good mechanical and chemical resistance ▪ Watertight ▪ Non-yellowing ▪ Easy application ▪ Slip resistant surface possible ▪ Easy to clean and maintain Packaging Part A: 16.5 kg containers Part B: 3.5 kg containers Part A + B: 20.0 kg ready to mix units
Original price was: $306.14.$298.49Current price is: $298.49.Add to cart
Sorry, this entry is only available in Arabic.
Original price was: $18.63.$15.97Current price is: $15.97.Add to cart
Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish. Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc. Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic. Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags
Original price was: $18.63.$16.77Current price is: $16.77.Add to cart
ECO-FRIENDLY LIQUID APPLIED WATERPROOFING SOLUTION BASED ON SIKA COELASTIC TECHNOLOGY (CET) Composition:- Polyurethane modified Acrylic Dispersion DESCRIPTION Sikalastic® WR is a cold-applied, highly elastic, onecompont waterborne liquid applied waterproofing membrane. Suitable for the use in hot and tropical climatic conditions. USES ▪For the waterproofing of bathrooms, shower rooms, kitchens and plumbing rooms beneath hard protection, for example ceramic tiles ▪For waterproofing solutions in both new construction and refurbishment projects ▪ For cost efficient waterproofing solution CHARACTERISTICS / ADVANTAGES ▪ Highly elastic and crack-bridging ▪ One-component - ready to use ▪Excellent adhesion on porous and non-porous substrates ▪ Seamless, fully bonded waterproofing membrane ▪ Water vapour permeable APPROVALS / CERTIFICATES ▪Conforms to the requirement of LEED EQ credit 4.2: Low - Emitting Materials. Paints and Coatings: VOC < 100 gm/l ▪Certified by Thomas Bell-Wright International Consultants according to ASTM E84-16 : Standard Test Method for Surface Burning Characteristic of Building Materials. Certificate number: TBW0300202 Packaging 20 kg plastic pails For more information https://gcc.sika.com/content/dam/dms/gcc/1/sikalastic_wr.pdf
Original price was: $133.11.$129.11Current price is: $129.11.Add to cart
Eco-friendly Liquid Applied Roof Waterproofing Solution Based on Sika Co-Elastic Technology (CET) Composition:- Polyurethane modified Acrylic Dispersion DESCRIPTION Sikalastic®-560 GCC is a cold-applied, one-component waterborne liquid applied waterproofing membrane, highly elastic and UV-resistant. Suitable for use in hot climatic conditions. USES ▪For exposed roof waterproofing solutions in both new construction and refurbishment projects ▪ For exposed roofs with many details and complex geometry when accessibility is limited ▪ For cost efficient life cycle extension of failing exposed roofs ▪ For reflective coating to enhance energy efficiency by reducing cooling costs CHARACTERISTICS / ADVANTAGES ▪UV resistant and resistant to yellowing and weathering ▪ Highly elastic and crack-bridging ▪ Non-toxic and VOC compliant water based coating ▪ One component - ready to use ▪Excellent adhesion on porous and non-porous substrates ▪ Seamless, fully bonded waterproofing membrane ▪ Water vapour permeable APPROVALS / CERTIFICATES ▪Conforms to the requirements of LEED EQ Credit 4.2: Low - Emitting Materials: Paints & Coatings: VOC < 100 gm/l ▪USGBC LEED rating: conforms to LEED SS Credit 7.2 - Heat Island Effect-Roof, SRI ≥ 78 ▪ Conforms to Estidama requirements for reflectivity ▪ Conforms to Dubai Green Buildings for reflectivity Packaging 20 kg plastic pails For more information https://ken.sika.com/dms/getdocument.get/e101c1e1-bd9c-4c91-a6d9-e45085c80ce5/sikalastic-560-gcc.pdf
Original price was: $133.11.$129.11Current price is: $129.11.Add to cart
INTEGRAL WATERPROOFING ADMIXTURE FOR MORTAR AND CONCRETE Composition:- Blend of organic and inorganic chemicals MORE DESCRIPTION Sikalite® AE is a ready to use powdered waterproofing admixture for cement / sand mortars and concrete. Suitable for use in hot and tropical climatic conditions. USES Sikalite® AE is used to provide waterproof structural concrete or cement/sand mortars, screeds and renders for walls, facades, floor toppings and jointing mortars. CHARACTERISTICS / ADVANTAGES Sikalite® AE contains pore sealing and water-repelling substances which provide the following beneficial properties: ▪ Reduction in permeability ▪ Increased durability ▪Used in concrete mortar ▪Indoor and Outdoor ▪Floors and walls ▪Embodiment and strengthening of walls, facades and floors Packaging 20 kg bags For more information https://gcc.sika.com/content/dam/dms/gcc/3/sikalite_ae.pdf
Original price was: $15.31.$13.16Current price is: $13.16.Add to cart
SikaSwell® A Hydrophilic swellable joint sealing profiles SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Usage Joint sealing: Construction joints Pipe and steel work penetrations through walls and floor slabs Around all types of penetrations and connection joints Construction joints in cable ducts Advantages Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Can be applied on different substrates BBA system approvals with SikaSwell S-2 Available in different sizes
Original price was: $70.55.$66.55Current price is: $66.55.Add to cart
ACETOXY SILICONE SEALANT FOR GLAZING AND WEATHERPROOFING DESCRIPTION Sikasil® Universal is a 1-component, solvent-free sealant for indoor and outdoor applications. USES Sikasil® Universal is designed for glazing and weatherproofing applications on non-porous substrates such as glass or glazed ceramic tiles. CHARACTERISTICS / ADVANTAGES Low-modulus High elasticity and flexibility Very good resistance to shrinkage, cracking and discoloration Very good adhesion to a variety of non-porous substrates For more information click the link https://grc.sika.com/content/dam/dms/gr01/s/020514030000000085_Sikasil_Universal_eng.pdf
Original price was: $4.15.$3.73Current price is: $3.73.Add to cart
ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: ▪ Rebars / reinforcing steel ▪ Threaded rods ▪ Bolts and special fastening systems ▪ Concrete ▪ Solid masonry ▪ Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ▪ Hard natural stone ▪ Solid rock ▪Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES ▪ Fast curing ▪ Standard guns can be used ▪ Medium to high load capacity ▪ ETA Approval available ▪ Suitable for cracked concrete ▪ Drinking Water certified ▪ LEED Attestation available ▪ Non-sag, even overhead ▪ Styrene-free ▪ Low odour ▪ Low wastage APPROVALS / CERTIFICATES ▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. ▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking ▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge 12 cartridges per box Pallet: 75 boxes For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf
Original price was: $22.89.$22.36Current price is: $22.36.Add to cart
CURING COMPOUND, PRIMER, SEALER AND SURFACE HARDENER FOR FRESHLY LAID CONCRETE Composition:- Aqueous solution of acrylic copolymer dispersion DESCRIPTION Sika® Antisol® WB is a ready to use, solvent free, water based liquid curing compound for preventing the evaporation of mixing water in concrete. It is ready for use and simple to apply. Suitable for use in hot and tropical climatic conditions. USES Sika® Antisol® WB can be applied on site and in precast plants. It has been specially developed for use as a high quality curing and sealing compound for interior or exterior applications. Sika® Antisol® WB is suitable for all kinds of concrete, horizontal and vertical applications and large areas of exposed concrete, such as: ▪ Highways ▪ Runways and taxiways ▪ Aprons and hard standings ▪ Roof decks ▪ Pre-stressed beams and piers ▪ Irrigation canals / channels CHARACTERISTICS / ADVANTAGES Sika® Antisol® WB has the following characteristics: ▪Reduces incidence of plastic cracking ▪Forms stable film on the surface to provide excellent curing and sealing properties ▪ Ensure achievement of desired strengths, minimize shrinkage ▪ Alleviates other costly methods such as Hessian – watering ▪ Increases frost resistance ▪Reduces dusting. Seals, primes and hardnens cement based compositions ▪ Non-flammable, non-toxic and non-staining ▪Considerable reduction in loss of water from concrete ▪ Cured film acts as primer between concrete surface and coating material Packaging 20 L cans 200 L drums
Original price was: $319.45.$308.80Current price is: $308.80.Add to cart
GENERAL PURPOSE, CEMENTITIOUS TILE ADHESIVE FOR THIN BED APPLICATION FOR SMALL AND MEDIUM TILES Composition:- Portland cement, selected aggregates MORE DESCRIPTION SikaCeram®-102 SA is one-pack premixed adhesive consisting of high resistance cements, selected silicon/quartz mineral charges and specific additives, used as thin bed tile adhesive for permanent fixing of ceramic tiles. It is ready to use with the addition of water. Suitable for use in hot and tropical climatic conditions. USES ▪ Suitable for bonding high absorption ceramic tiles ▪Indoor application without primer over concrete, cement mortars, bricks ▪ Suitable for floor and wall applications ▪ Suitable for moisture tolerant natural stone CHARACTERISTICS / ADVANTAGES Very good adhesion to most substrates (concrete, cementitious mortar, stone, bricks) ▪ Easy to mix and use ▪ Excellent workability and thixotropic consistency ▪ Single component system ▪ Minimized sagging with small format tiles APPROVALS / CERTIFICATES SikaCeram®-102 SA follows the main requirements of EN 12004 class C1 T and complies to the requirements of ANSI 118.4 for shear strength. Packaging 20, 50 kg bag For more Information https://gcc.sika.com/content/dam/dms/gcc/z/sikaceram_-102_sa.pdf
Original price was: $6.92.$6.12Current price is: $6.12.Add to cart
EASY TO APPLY TILE ADHESIVE FOR MEDIUM SIZED CERAMIC TILES Composition:- Portland cement, selected aggregates MORE DESCRIPTION SikaCeram®-103 Easy SA is a cement-based powder adhesive to easily lay small to medium sized ceramic tiles. ▪Suitable for walls and floors ▪Inside and outside of residential properties. ▪It can be used in layers up to 10 mm thick. ▪For use in hot and tropical climatic conditions. USES SikaCeram®-103 Easy SA is suitable for bonding all kinds of ceramic tiles. SikaCeram®-103 Easy SA can be used indoors and outdoors for wall or floor applications, on the following substrate surfaces: ▪ Gypsum based substrates in dry areas ▪ Cement based substrates like concrete & renders ▪ Suitable for moisture tolerant natural stone CHARACTERISTICS / ADVANTAGES Very good adhesion to most substrates (concrete, cementitious mortar, stone, bricks) ▪ Very easy to mix and use ▪ Excellent workability and thixotropic consistency ▪ Single component system ▪ Non sagging with medium to small format tiles APPROVALS / CERTIFICATES SikaCeram®-103 Easy SA follows the main requirements of EN 12004 class C1 TE and complies to the requirements of ANSI 118.4 for shear strength. Packaging 20 kg Bag WHITE Fot more information https://gcc.sika.com/content/dam/dms/gcc/h/sikaceram-103-easysa.pdf
Original price was: $7.19.$6.66Current price is: $6.66.Add to cart
HIGH PERFORMANCE, POLYMER CONTAINING, WATER RESISTANT CEMENTITIOUS ADHESIVE FOR THIN BED APPLICATION OF MEDIUM AND LARGE TILES Composition:- Portland cement, selected aggregates and polymers MORE DESCRIPTION SikaCeram®-202 SA is a high performance, one-pack, polymer containing, water resistant, premixed adhesive. Consisting of high resistance cements, selected silicon / quartz mineral charges and specific additives, used as thin bed tile adhesive for permanent fixing of ceramic tiles. Suitable for use in hot and tropical climatic conditions. USES ▪Suitable for bonding of high absorption ceramic tiles, earthenware, extruded and refined porcelain tiles ▪Suitable for bonding of large size tiles used in industial enviroment, wet areas, swimming pools, facades ▪Suitable for bathrooms, kitchens, balconies, terraces, etc. ▪ Indoor and outdoor application over concrete, cement mortars, bricks and plaster ▪ For horizontal and vertical areas ▪ Suitable for moisture tolerant natural stone ▪Suitable to tile directly on various Sika waterproofing products CHARACTERISTICS / ADVANTAGES ▪ Very good adhesion ▪ Easy to mix and use ▪ Excellent workability and thixotropic consistency ▪ Water resistant ▪ Extended open time ▪ Single component system APPROVALS / CERTIFICATES SikaCeram®-202 SA follows the requirements of EN 12004 class C2 E and complies to the requirements of ANSI 118.4 for shear strength. Packaging 20 kg bag For more information https://gcc.sika.com/content/dam/dms/gcc/z/sikaceram_-202_sa.pdf
Original price was: $9.18.$8.52Current price is: $8.52.Add to cart
CEMENT BASED, DEFORMABLE, HIGH PERFORMANCE TILE ADHESIVE High performance Cement base adhesive with no vertical slip and extended open time. C2TE classified according to EN 12004 Composition:- Portland cement, selected aggregates and polymers MORE DESCRIPTION SikaCeram®-255 StarFlex LD AE is a cement-based, high performance, polymer containing, deformable, one-pack tile adhesive. It can be used in layers up to 10 mm. SikaCeram®-255 StarFlex LD AE is suitable for setting all kind of tiles on both floors and walls, inside and outside for residential and commercial areas on heated floors, balconies, terraces and swimming pools. Suitable for use in hot and tropical climatic conditions. USES ▪Suitable for bonding of high absorption ceramic tiles, earthenware, extruded and refined porcelain tiles ▪Suitable for bonding of large size tiles used in industial enviroment, wet areas, swimming pools, etc. ▪ Suitable for bathrooms, kitchens, balconies, terraces, etc. ▪ Indoor and outdoor application over concrete, cement mortars, bricks and plaster ▪ Suitable for indoor application over various types of drywalls ▪ Suitable for moisture tolerant natural stone ▪Suitable to tile directly on various Sika waterproofing products CHARACTERISTICS / ADVANTAGES ▪ Very good adhesion ▪ Easy to mix and use ▪ Excellent workability and thixotropic consistency ▪ Water resistant ▪ Extended open time ▪ Single component system ▪ Deformable ▪ No vertical slipping ▪ Smooth application ▪7.0 to 7.5 L of water per 25 kg bag SUSTAINABILITY ▪SikaCeram®-255 StarFlex LD AE is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL), certificate No. CL17020432 ▪ California Department of Public Health (CDPH) Method - VOC emission test: PASS APPROVALS / CERTIFICATES SikaCeram®-255 StarFlex LD AE follows the main requirements of EN 12004 and ISO 13007-1 for class C2 TE S1 and main requirements of ANSI 118.15, ANSI 118.4 and ANSI 118.1 Packaging 25 kg bag For more information https://gcc.sika.com/content/dam/dms/gcc/h/sikaceram_-255_starflexldae.pdf
Original price was: $24.49.$19.97Current price is: $19.97.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
