1
$319.45
SELF-SMOOTHING PIGMENTED EPOXY RESIN FOR FLOORING APPLICATION
Epoxy material consisting of three compounds (sikadur 504 + B + A) at a rate of (25:1:1) free of solvents to give self-leveling colored floors
Sikafloor®-263 SL is a two part (filler supplied separately), self-smoothing, pigmented, epoxy resin for flooring application.
Suitable for use in hot and tropical climatic conditions.
Product use and characteristics
The thickness ranges from 1.5 mm to 5.0 mm on industrial floors that are subject to relatively heavy loads.
Food, drug and chemical factories
Electricity and water stations
Laboratories and rooms exposed to radiation
Exhibitions, presentation rooms, training and assembly halls
Hard surfaces such as concrete and mortar
Maintenance workshops
Warehouses
Garages and car parks
hangars
production areas
Water and liquid insulator
High compressive strength
Solvent-free and non-flammable
Economical and easy to apply, clean and maintain
Highly fillable
Good chemical and mechanical resistance
Easy application
Liquid proof
Gloss finish
Slip resistant surface possible
Sikafloor®-263 SL is used as self-smoothing system for concrete and cement screeds with medium to heavy wear, e.g. for:
Storage warehouses
Assembly halls
Maintenance workshops
Garages and car parks
Loading bays
Aircraft hangars
Plant rooms
Clean rooms
Production areas
Dry food processing plants
Pharmaceutical manufacturing
For more information
https://gcc.sika.com/content/dam/dms/gcc/x/sikafloor_-263_sl.pdf
$216.96 Original price was: $216.96.$207.64Current price is: $207.64.Add to cart
Sorry, this entry is only available in Arabic.
$199.66 Original price was: $199.66.$183.68Current price is: $183.68.Add to cart
2-COMPONENT THIXOTROPIC EPOXY ADHESIVE
Composition:- Epoxy resin
DESCRIPTION
Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C.
Suitable for use in hot and tropical conditions.
USES
Sikadur®-31 CF Slow may only be used by experienced professionals.
As a structural adhesive and mortar for:
Concrete elements
Hard natural stone
Ceramics, fibre cement
Mortar, bricks, masonry
Steel, iron, aluminium
Wood
Polyester, epoxy
Glass
As a fast setting rapid repair adhesive and mortar:
Corners and edges
Holes and void filling
For vertical and overhead use
As a joint filling and crack sealing:
Joint arris repair and crack sealing
CHARACTERISTICS / ADVANTAGES
Sikadur®-31 CF Slow has the following advantages:
Easy to mix and apply
Very good adhesion to most construction materials
High strength adhesive
Thixotropic: non-sag in vertical and overhead applications
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Good abrasion resistance
Impermeable to liquids and water vapour
Good chemical resistance
Packaging
Component A: Component B: A+B set
4 kg 2 kg 6 kg
8 kg 4 kg 12 kg
For more information
https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_-31_cf_slow.pdf
$59.63 Original price was: $59.63.$55.90Current price is: $55.90.Add to cart
LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES
DESCRIPTION
Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions.
USES
Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades.
A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor
CHARACTERISTICS / ADVANTAGES
Very good weathering resistance
Movement capability of ±50 % (ASTM C 719)
Good adhesion to a wide range of substrates
Neutral cure
Low VOC content
An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality.
Protect the substrate from moisture entering from the tiles
Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption
Easy to apply, you can use brush, roller or wipe
Walls of hospitals, offices and corners with gypsum board and cement board
Heated floors (water and electricity systems)
Packaging
300 ml cartridge, 12 cartridges per box
600 ml foil pack, 20 foil packs per box
For more information
https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf
$61.23 Original price was: $61.23.$53.24Current price is: $53.24.Add to cart
Sikaflex® Construction+ 1-PART FLEXIBLE SEALANT FOR CONCRETE AND PRECAST JOINTS Sikaflex® Construction+ is a 1-component, moisture-curing, elastic joint sealant. Suitable for use in hot and tropical climatic conditions. Very good resistance to weathering Movement capability of ± 35 (ASTM C 719) Over paintable Bubble-free curing Good workability Good adhesion to many substrates Solvent-free Very low emissions Usage Sikaflex® Construction+ is designed as a general purpose sealant for sealing joints in building construction such as movement, expansion and construction/isolation joints around windows and doors, facades, claddings etc. in concrete, brick, wood, metal and PVC sections and structures etc. Packaging 600 mL foil pack, 20 foil packs per box Colour White, cream white, beige, concrete grey and jasmine (further colours available upon request) SUSTAINABILITY Sikaflex® Construction+ conforms to LEED® EQc 4.1 VOC content < 30 g/l (US EPA Method 24) SCAQMD, Rule 1168 BAAQMD, Reg. 8, Rule 51 EMICODE EC1PLUS R M1 (Emission Class for Building Material)
$8.52 Original price was: $8.52.$7.19Current price is: $7.19.Add to cart
Cementitious R4 concrete repair mortar containing recycled waste materials
DESCRIPTION
Sika MonoTop®-4012 is a 1-part, cementitious, fibre
reinforced, low shrinkage repair mortar. It contains recycled waste materials and can reduce the carbon
footprint application activity calculations.
USES
Sika MonoTop®-4012 may only be used by experienced professionals.
Repairs to all types of reinforced concrete structures
and components for:
Buildings
Civil engineering structures
Marine structures
Dams
Structures requiring a Class R4, R3, R2 or R1 mortar
SUSTAINABILITY
Conformity with LEED v4 MRc 2 (Option 1): Building
Product Disclosure and Optimization – Environmental Product Declarations
Cnformity with LEED v4 MRc 3 (Option 2): Building
Product Disclosure and Optimization - Sourcing of
Raw Materials
Conformity with LEED v4 MRc 4 (Option 2): Building
Product Disclosure and Optimization - Material Ingredients
IBU Environmental Product Declaration (EPD
$18.63 Original price was: $18.63.$16.77Current price is: $16.77.Add to cart
RAPID SETTING MORTAR
Rapid-setting cement powder
MORE DESCRIPTION
Sika MonoTop®-108 Water Plug AE is a rapid-setting cement mortar for plugging water leaks in concrete
and masonry walls.
Suitable for use in hot and tropical climatic conditions.
USES
Instant plugging of negative pressure water inlet through cracks, gravel niches and casting joints.
Instant plugging of drained water outlets, during waterproofing treatments.
CHARACTERISTICS / ADVANTAGES
Rapid setting to avoid washout even in the presence of running water
Hardens within ~60–90 seconds (at 20 °C)
Packaging
10 kg bag
For more information
https://gcc.sika.com/content/dam/dms/gcc/p/sika-monotop-108waterplugae.pdf
$29.28 Original price was: $29.28.$26.09Current price is: $26.09.Add to cart
FORMERLY KNOWN AS SIKAREP® HSF SA.
MULTI-PURPOSE, HIGH STRENGTH, FIBRE-REINFORCED, PATCHING AND REPAIR MORTAR
Composition:- Polymer containing cementitious mortar with different additives and synthetic fibres
MORE DESCRIPTION
Sika MonoTop®-615 HSF SA is a cementitious, synthetic fibre reinforced, silica fume and polymer containing,
one-component repair mortar.
Suitable for use in hot and tropical climatic conditions.
USES
Sika MonoTop®-615 HSF SA can be used for cosmetic
or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications.
CHARACTERISTICS / ADVANTAGES
Easy to mix, apply and finish
Good adhesion
Shrinkage compensated
Compatible with the properties of typical concretes
Low water absorption, but vapour permeable
Non corrosive
Excellent chloride and carbonation resistance
Fibre reinforced
High strength
For more information
https://gcc.sika.com/content/dam/dms/gcc/b/sika_monotop_-615hsfsa.pdf
$24.49 Original price was: $24.49.$22.96Current price is: $22.96.Add to cart
SOLVENT-BASED BITUMINOUS COATING FOR PERMANENT PROTECTION OF CONCRETE SURFACES SUBJECT TO AGGRESSIVE SOILS.
Composition:- Bituminous Emulsion Solvent-based coating for permanent protection of concrete surfaces subject to aggressive soils.
USES
To protect concrete surfaces against attack of aggressive soils & subsequent backfills; such as :
Retaining walls.
Basements.
Columns.
Foundations.
CHARACTERISTICS / ADVANTAGES
As Coating:
Easy application (Brush, roller or airless spray).
No heating required.
Increased coverage rates.
Adheres firmly on most building surfaces.
High resistance to aggressive chemicals and salts.
APPROVALS / CERTIFICATES
ACI 515 IR-79. Guide to use of waterproofing, damp proofing, protection and decorative barrier systems
for Concrete. Chapter 2 section 2.1.1, 2.1.2 and 2.1.3 ASTM D1227 type 3 class 1
Sika Bitumen® -W has been tested as per SCAQMD
Rule 1168. Result : VOC Content 0 g/l.
Packaging
14 Kg pails
200 kg drums.
For more information
https://egy.sika.com/content/dam/dms/eg01/w/sika_bitumen.pdf
$346.07 Original price was: $346.07.$319.45Current price is: $319.45.Add to cart
1-COMPONENT, POLYURETHANE-BASED, SLIGHTLY FLEXIBLE, FOAMING INJECTION
RESIN FOR THE PERMANENT WATERTIGHT SEALING OF CRACKS
Composition:- Moisture and water reactive one - component, foaming polyurethane resin
MORE DESCRIPTION
Sika® Injection-107 is a ready-to-use 1-component, polyurethane based, slightly flexible, foaming injection resin for the permanent watertight sealing of cracks, voids and interstices in concrete.
Suitable for use in hot and tropical climatic conditions.
USES
Sika® Injection-107 may only be used by experienced professionals.
Sika® Injection-107 is used for permanent watertight sealing with some flexibility to absorb limited movement, in water-bearing cracks and joints in concrete, brickwork and natural stone structures
CHARACTERISTICS / ADVANTAGES
Permanently elastic, can absorb limited movements
Durable sealing of water-bearing cracks and voids of > 0.3mm
Moisture-reactive, one-component polyurethane resin - water contact is required for the foaming reaction and curing to a permanently flexible sealing compound
Packaging
Available in metal containers of:
5.3 kg
10.6 kg
For more information
https://gcc.sika.com/content/dam/dms/gcc/u/sika_injection-107.pdf
$119.79 Original price was: $119.79.$113.14Current price is: $113.14.Add to cart
ECONOMICAL WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE
Composition:- Styrene Butadiene Rubber
DESCRIPTION
SikaBond® DV is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges
and high quality site-mix mortars.
Suitable for use in hot and tropical climatic conditions.
USES
SikaBond® DV is used as bonding agent and site-mix mortar admixture for the following applications:
Thin layer patching mortars
Renders
Floor screeds
Concrete repair mortars
Abrasion resistant linings
Tile fixing mortars
Masonry mortars
Bonding slurry for fresh to old concrete
CHARACTERISTICS / ADVANTAGES
SikaBond® DV is simply added to the mixing water to improved the following properties:
adhesion
shrinkage
water resistance
abrasion resistance
chemical resistance
SikaBond® DV is non-corrosive, ready to use and does not re-emulsify, even under highly alkaline conditions.
APPROVALS / CERTIFICATES
SikaBond® DV is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432
Packaging
20 L pails and 200 L drums
For more information
https://gcc.sika.com/content/dam/dms/gcc/a/sikabond_dv.pdf
$45.52 Original price was: $45.52.$44.19Current price is: $44.19.Add to cart
HIGH PERFORMANCE, POLYMER CONTAINING, WATER RESISTANT CEMENTITIOUS ADHESIVE FOR THIN BED APPLICATION OF LARGE TILES
Composition:- Portland cement, selected aggregates and polymers
MORE DESCRIPTION
SikaCeram®-216 Premium is a high performance, onepack, polymer containing, water resistant, premixed
adhesive. Consisting of high resistance cements, selected silicon / quartz mineral charges and specific additives, used as thin bed tile adhesive for permanent fixing of ceramic tiles.
Suitable for use in hot and tropical climatic conditions.
USES
Suitable for bonding of high absorption ceramic tiles, earthenware, extruded and refined porcelain tiles
Suitable for bonding of large size tiles used in industial enviroment, wet areas, swimming pools, facades
Suitable for bathrooms, kitchens, balconies, terraces, etc.
Indoor and outdoor application over concrete, cement mortars, bricks and plaster
For horizontal and vertical areas
Suitable for moisture tolerant natural stone
Suitable to tile directly on various Sika waterproofing products
CHARACTERISTICS / ADVANTAGES
Very good adhesion
Easy to mix and use
Excellent workability and thixotropic consistency
Water resistant
Extended open time
Single component system
No sagging
APPROVALS / CERTIFICATES
SikaCeram®-216 Premium follows the requirements of EN 12004 class C2 TE and complies to the requirements of ANSI 118.4 for shear strength.
Packaging
20 kg bag
For more information
https://gcc.sika.com/content/dam/dms/gcc/5/sikaceram_-216_premium.pdf
$12.05 Original price was: $12.05.$11.45Current price is: $11.45.Add to cart
Selected grades of quartz sand for the application of special floors and a filler for the preparation of industrial coatings, to be added as a supporting compound for Sikafloor and Sikaguard products. Sikafloor® - 161 Sikafloor® - 263 product characreristics 0.08 – 0.20 mm Grading 1.5 kg/Lt Bulk Density 25 kg bag Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf To return to List Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit
$13.78 Original price was: $13.78.$12.25Current price is: $12.25.Add to cart
Selected grades of quartz sand for special flooring application and a filler for the preparation of industrial coatings are added as a supporting compound to SIKAFLOOR products. Sikafloor® - 161 Sikafloor® - 264 product characreristics 0.01 – 1.2 mm Grading 1.8 kg/Lt Bulk Density 25 kg bag Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf
$13.78 Original price was: $13.78.$12.25Current price is: $12.25.Add to cart
Selected grades of quartz sand for special flooring application and a filler for the preparation of industrial coatings are added as a supporting compound to SIKAFLOOR products. Sikafloor® - 161 Sikafloor® - 264 Sikafloor® - 264 SG product characreristics 0.3 – 0.7 mm Grading 1.5 kg/Lt Bulk Density 25 kg bag Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf للعودة الى قائمة Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit
$13.78 Original price was: $13.78.$12.25Current price is: $12.25.Add to cart
Selected grades of quartz sand for the application of special floors and a filler for the preparation of industrial coatings, to be added as a supporting compound for Sikafloor and Sikaguard products. Sikafloor® - 161 Sikafloor® - 264 Sikafloor® - 264 SG product characreristics 0.7 – 1.2 mm Grading 1.5 kg/Lt Bulk Density 25 kg bag Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf To return to List Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit
$13.78 Original price was: $13.78.$12.25Current price is: $12.25.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
