0
$0.00
Original price was: $18.63.$15.97Current price is: $15.97.
100 in stock
Related products
General Purpose cementitious grout Chemical Base:- Cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. USES ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out CHARACTERISTICS / ADVANTAGES ▪ Easy to use (ready to mix powder) ▪Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪Blend of shrinkage-reducing and plasticizing/waterreducing agents ▪ Low heat build-up ▪Excellent for pumping: does not segregate, even at high flow. ▪No build-up on equipment hopper ▪ Superior freeze/thaw resistance ▪ Resistant to oil and water APPROVALS / STANDARDS ▪ Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout®-212 is USDA certifiable Packaging 50 lb (22.7 kg) bag For more information https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf
Original price was: $34.00.$12.25Current price is: $12.25.Read more
ONE COMPONENT, ECONOMICAL, POLYMER MODIFIED, PORE SEALER / FINISHING MORTAR Composition:- Polymer containing cementitious mortar with different additives. DESCRIPTION SikaRep® Fine SA is a cementitious, silica fume containing, polymer modified one component pore sealer and finishing mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® Fine SA can be used as a: ▪Pore sealer / finishing mortar on cementitious substrates. ▪Thin layer rendering on horizontal and vertical areas in building and civil engineering construction, for external and internal finishing etc. ▪Levelling mortar on uneven substrates, and profiled concrete surfaces. ▪ Repair mortar to fill honeycombing pores etc. ▪Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings. CHARACTERISTICS / ADVANTAGES ▪ Easy to use ▪ Excellent workability ▪ Good mechanical strengths ▪ Can be applied by the wet-spray method ▪ Non-corrosive ▪ Adjustable consistency ▪ Economical Soft, smooth, ready-to-use repair mortar for concrete containing steam, silica and organic matter Used for filling and nesting gaps between 1 - 10 mm Polymer-modified cementitious sealant to be mixed with water, grouting mechanics, 7.5 liters per 25 kilos Closing pores and leveling different surfaces Restoration of capillary cracks and micro voids End repair works, joint joints and equal bends in concrete surfaces Homogeneous texture and resistance to mechanical stresses Can be sprayed with a vacuum gun Friendly, non-toxic and non-toxic economic Indoor and outdoor installation Vertical and horizontal
Original price was: $16.77.$15.17Current price is: $15.17.Add to cart
BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf
Original price was: $76.40.$75.60Current price is: $75.60.Add to cart
Free flowing micro-concrete for grouting and repair Mixture of Portland Cement and graded aggregates Product Description Sikacrete® 112 one component, free-flowing, high strength, cement based microconcrete with a maximum aggregate size of 5 mm. Suitable for use in tropical and hot climatic conditions. Uses Sikacrete® 112 used for the structural repair of deteriorated concrete. It is ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. A typical application is the re-profiling of damaged concrete members, using formwork. Also suitable for base plate grouting where thickness exceeds 75 mm. Characteristics / Advantages One component, requires the addition of water only Reduced waste and risk of mixing failures Easy to mix, apply and finish Economical Excellent adhesion Shrinkage compensated Rapid strength development Compatible with the properties of typical concrete Vapour permeable High resistance to freeze/thaw cycling
Original price was: $13.31.$12.25Current price is: $12.25.Read more
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
Reviews
There are no reviews yet.