1
ر.س56.00
Original price was: ر.س70.00.ر.س60.00Current price is: ر.س60.00.
99 in stock
Related products
MULTI-PURPOSE, ECONOMICAL, PATCHING AND REPAIR MORTAR Composition:- Polymer containing cementitious mortar with different additives DESCRIPTION SikaRep® SA is a cementitious, silica fume and polymer containing, one-component repair mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications. CHARACTERISTICS / ADVANTAGES ▪ Easy to mix, apply and finish ▪ Good adhesion ▪ Shrinkage compensated ▪ Compatible with the properties of typical concretes ▪ Low water absorption, but vapour permeable ▪ Non-corrosive ▪ Excellent chloride and carbonation resistance
Original price was: ر.س63.25.ر.س56.00Current price is: ر.س56.00.Add to cart
ONE COMPONENT, ECONOMICAL, POLYMER MODIFIED, PORE SEALER / FINISHING MORTAR Composition:- Polymer containing cementitious mortar with different additives. DESCRIPTION SikaRep® Fine SA is a cementitious, silica fume containing, polymer modified one component pore sealer and finishing mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® Fine SA can be used as a: ▪Pore sealer / finishing mortar on cementitious substrates. ▪Thin layer rendering on horizontal and vertical areas in building and civil engineering construction, for external and internal finishing etc. ▪Levelling mortar on uneven substrates, and profiled concrete surfaces. ▪ Repair mortar to fill honeycombing pores etc. ▪Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings. CHARACTERISTICS / ADVANTAGES ▪ Easy to use ▪ Excellent workability ▪ Good mechanical strengths ▪ Can be applied by the wet-spray method ▪ Non-corrosive ▪ Adjustable consistency ▪ Economical Soft, smooth, ready-to-use repair mortar for concrete containing steam, silica and organic matter Used for filling and nesting gaps between 1 - 10 mm Polymer-modified cementitious sealant to be mixed with water, grouting mechanics, 7.5 liters per 25 kilos Closing pores and leveling different surfaces Restoration of capillary cracks and micro voids End repair works, joint joints and equal bends in concrete surfaces Homogeneous texture and resistance to mechanical stresses Can be sprayed with a vacuum gun Friendly, non-toxic and non-toxic economic Indoor and outdoor installation Vertical and horizontal
Original price was: ر.س63.00.ر.س57.00Current price is: ر.س57.00.Add to cart
General Purpose cementitious grout Chemical Base:- Cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. USES ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out CHARACTERISTICS / ADVANTAGES ▪ Easy to use (ready to mix powder) ▪Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪Blend of shrinkage-reducing and plasticizing/waterreducing agents ▪ Low heat build-up ▪Excellent for pumping: does not segregate, even at high flow. ▪No build-up on equipment hopper ▪ Superior freeze/thaw resistance ▪ Resistant to oil and water APPROVALS / STANDARDS ▪ Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout®-212 is USDA certifiable Packaging 50 lb (22.7 kg) bag For more information https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf
Original price was: ر.س50.00.ر.س46.00Current price is: ر.س46.00.Add to cart
LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES DESCRIPTION Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions. USES Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades. A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor CHARACTERISTICS / ADVANTAGES ▪ Very good weathering resistance ▪ Movement capability of ±50 % (ASTM C 719) ▪ Good adhesion to a wide range of substrates ▪ Neutral cure ▪ Low VOC content An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality. Protect the substrate from moisture entering from the tiles Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption Easy to apply, you can use brush, roller or wipe Walls of hospitals, offices and corners with gypsum board and cement board Heated floors (water and electricity systems) Packaging 300 ml cartridge, 12 cartridges per box 600 ml foil pack, 20 foil packs per box For more information https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf
Original price was: ر.س230.00.ر.س200.00Current price is: ر.س200.00.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
Reviews
There are no reviews yet.