Sale!

SikaGrout®-114 SA

Original price was: ر.س34.00.Current price is: ر.س32.00.

800 in stock

Description

CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT

Composition :- Portland cement, selected fillers and aggregates, special additives

 

DESCRIPTION

SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength.
Suitable for use in hot and tropical climatic conditions

USES

SikaGrout®-114 SA is used for grouting in the following:
▪ Machine foundations
▪ Columns in pre-cast construction
▪ Concrete anchors, cavities, gaps and recesses
▪ Base plates
▪ General concrete repairs
▪ Bridge bearing pads

CHARACTERISTICS / ADVANTAGES

SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial
properties:
▪ Easy to mix
▪ Good flow characteristics
▪ Adjustable consistency
▪ High final strengths
▪ Non-corrosive and iron-free

APPROVALS / CERTIFICATES

Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C

Packaging

25 kg bag

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “SikaGrout®-114 SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaRep® Fine SA 25Kg

ONE COMPONENT, ECONOMICAL, POLYMER MODIFIED, PORE SEALER / FINISHING MORTAR Composition:- Polymer containing cementitious mortar with different additives. DESCRIPTION SikaRep® Fine SA is a cementitious, silica fume containing, polymer modified one component pore sealer and finishing mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® Fine SA can be used as a: ▪Pore sealer / finishing mortar on cementitious substrates. ▪Thin layer rendering on horizontal and vertical areas in building and civil engineering construction, for external and internal finishing etc. ▪Levelling mortar on uneven substrates, and profiled concrete surfaces. ▪ Repair mortar to fill honeycombing pores etc. ▪Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings. CHARACTERISTICS / ADVANTAGES ▪ Easy to use ▪ Excellent workability ▪ Good mechanical strengths ▪ Can be applied by the wet-spray method ▪ Non-corrosive ▪ Adjustable consistency ▪ Economical Soft, smooth, ready-to-use repair mortar for concrete containing steam, silica and organic matter Used for filling and nesting gaps between 1 - 10 mm Polymer-modified cementitious sealant to be mixed with water, grouting mechanics, 7.5 liters per 25 kilos Closing pores and leveling different surfaces Restoration of capillary cracks and micro voids End repair works, joint joints and equal bends in concrete surfaces Homogeneous texture and resistance to mechanical stresses Can be sprayed with a vacuum gun Friendly, non-toxic and non-toxic economic Indoor and outdoor installation Vertical and horizontal

Original price was: ر.س63.00.Current price is: ر.س57.00.Add to cart

Sika Primer -11 W+

LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES   DESCRIPTION Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions. USES Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades. A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor CHARACTERISTICS / ADVANTAGES  ▪ Very good weathering resistance ▪ Movement capability of ±50 % (ASTM C 719) ▪ Good adhesion to a wide range of substrates ▪ Neutral cure ▪ Low VOC content An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality. Protect the substrate from moisture entering from the tiles Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption Easy to apply, you can use brush, roller or wipe Walls of hospitals, offices and corners with gypsum board and cement board Heated floors (water and electricity systems) Packaging 300 ml cartridge, 12 cartridges per box 600 ml foil pack, 20 foil packs per box     For more information https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf

Original price was: ر.س230.00.Current price is: ر.س200.00.Add to cart

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings   CHARACTERISTICS / ADVANTAGES  ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use   Packaging 20, 40 kg bag   For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: ر.س57.50.Current price is: ر.س55.20.Add to cart

Sika Antisol® WB

CURING COMPOUND, PRIMER, SEALER AND SURFACE HARDENER FOR FRESHLY LAID CONCRETE Composition:- Aqueous solution of acrylic copolymer dispersion   DESCRIPTION Sika® Antisol® WB is a ready to use, solvent free, water based liquid curing compound for preventing the evaporation of mixing water in concrete. It is ready for use and simple to apply. Suitable for use in hot and tropical climatic conditions. USES Sika® Antisol® WB can be applied on site and in precast plants. It has been specially developed for use as a high quality curing and sealing compound for interior or exterior applications. Sika® Antisol® WB is suitable for all kinds of concrete, horizontal and vertical applications and large areas of exposed concrete, such as: ▪ Highways ▪ Runways and taxiways ▪ Aprons and hard standings ▪ Roof decks ▪ Pre-stressed beams and piers ▪ Irrigation canals / channels CHARACTERISTICS / ADVANTAGES  Sika® Antisol® WB has the following characteristics: ▪Reduces incidence of plastic cracking ▪Forms stable film on the surface to provide excellent curing and sealing properties ▪ Ensure achievement of desired strengths, minimize shrinkage ▪ Alleviates other costly methods such as Hessian – watering ▪ Increases frost resistance ▪Reduces dusting. Seals, primes and hardnens cement based compositions ▪ Non-flammable, non-toxic and non-staining ▪Considerable reduction in loss of water from concrete ▪ Cured film acts as primer between concrete surface and coating material Packaging 20 L cans 200 L drums

Original price was: ر.س1,200.00.Current price is: ر.س1,160.00.Add to cart

Home Category Products My account
1 ر.س63.25
Select your currency
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
Sikacrete®-114 SA
Price: ر.س63.25
- +
ر.س63.25
    Apply Coupon