Sale!

SikaGrout®-114 SA

Original price was: ر.س34.00.Current price is: ر.س32.00.

800 in stock

Description

CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT

Composition :- Portland cement, selected fillers and aggregates, special additives

 

DESCRIPTION

SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength.
Suitable for use in hot and tropical climatic conditions

USES

SikaGrout®-114 SA is used for grouting in the following:
▪ Machine foundations
▪ Columns in pre-cast construction
▪ Concrete anchors, cavities, gaps and recesses
▪ Base plates
▪ General concrete repairs
▪ Bridge bearing pads

CHARACTERISTICS / ADVANTAGES

SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial
properties:
▪ Easy to mix
▪ Good flow characteristics
▪ Adjustable consistency
▪ High final strengths
▪ Non-corrosive and iron-free

APPROVALS / CERTIFICATES

Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C

Packaging

25 kg bag

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “SikaGrout®-114 SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sika Primer -11 W+

LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES   DESCRIPTION Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions. USES Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades. A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor CHARACTERISTICS / ADVANTAGES  ▪ Very good weathering resistance ▪ Movement capability of ±50 % (ASTM C 719) ▪ Good adhesion to a wide range of substrates ▪ Neutral cure ▪ Low VOC content An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality. Protect the substrate from moisture entering from the tiles Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption Easy to apply, you can use brush, roller or wipe Walls of hospitals, offices and corners with gypsum board and cement board Heated floors (water and electricity systems) Packaging 300 ml cartridge, 12 cartridges per box 600 ml foil pack, 20 foil packs per box     For more information https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf

Original price was: ر.س230.00.Current price is: ر.س200.00.Add to cart

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings   CHARACTERISTICS / ADVANTAGES  ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use   Packaging 20, 40 kg bag   For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: ر.س57.50.Current price is: ر.س55.20.Add to cart

Sikacrete® 112

Free flowing micro-concrete for grouting and repair Mixture of Portland Cement and graded aggregates Product Description Sikacrete® 112 one component, free-flowing, high strength, cement based microconcrete with a maximum aggregate size of 5 mm. Suitable for use in tropical and hot climatic conditions.   Uses  Sikacrete® 112 used for the structural repair of deteriorated concrete.  It is ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications.  A typical application is the re-profiling of damaged concrete members, using formwork.  Also suitable for base plate grouting where thickness exceeds 75 mm.   Characteristics / Advantages  One component, requires the addition of water only  Reduced waste and risk of mixing failures  Easy to mix, apply and finish  Economical Excellent adhesion Shrinkage compensated Rapid strength development  Compatible with the properties of typical concrete  Vapour permeable High resistance to freeze/thaw cycling

Original price was: ر.س50.00.Current price is: ر.س46.00.Read more

(العربية) Sikafloor 270 Level 25kg

Sorry, this entry is only available in Arabic.

Original price was: ر.س70.00.Current price is: ر.س60.00.Add to cart

Home Category Products My account
1 ر.س200.00
Select your currency
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
Sika Primer -11 W+
Price: ر.س200.00
- +
ر.س200.00
    Apply Coupon