Sale!

Sikadur® PF

Original price was: ر.س224.00.Current price is: ر.س210.00.

20 in stock

Category:

Description

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY

Composition:- Epoxy resin and special fillers

DESCRIPTION

Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers.
Suitable for use in hot and tropical conditions.

USES

Sikadur® PF may only be used by experienced professionals.
▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc.
▪ General smoothing / re-profiling over large areas
▪ Suitable for feather edge
▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product
range
▪ Filling of non structural cracks, holes and voids
▪ Corners and joints edges repair

 

CHARACTERISTICS / ADVANTAGES

Sikadur® PF has the following advantages:
▪ Easy to mix and apply
▪ High strength surface repair material
▪ Very good adhesion to most construction materials
▪ High strength adhesive

▪ Thixotropic: non-sag in vertical and overhead applications
▪ Non-shrink
▪ Different coloured components (for mixing control)
▪ No primer needed
▪ Excellent mechanical strength
▪ Impermeable to liquids and water vapour
▪ Good chemical resistance
▪ Suitable for dry and damp surfaces
▪Cost effective; consumption of subsequent coatings is reduced
▪ Excellent adhesion to concrete substrates
▪ Good abrasion and impact resistance

 

Packaging

Part A:                   4 kg container
Part B:                   2 kg container
(A + B)                  6 kg ready to mix units

For more information

https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Additional information

Weight 6 kg

Reviews

There are no reviews yet.

Be the first to review “Sikadur® PF”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikadur®-31 CF Slow

2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing     CHARACTERISTICS / ADVANTAGES   Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance   Packaging Component A:                                  Component B:                                         A+B set 4 kg                                                         2 kg                                                          6 kg 8 kg                                                          4 kg                                                        12 kg     For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_-31_cf_slow.pdf

Original price was: ر.س224.00.Current price is: ر.س210.00.Add to cart

Sika AnchorFix®-2+ Tropical

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: ▪ Rebars / reinforcing steel ▪ Threaded rods ▪ Bolts and special fastening systems ▪ Concrete ▪ Solid masonry ▪ Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ▪ Hard natural stone ▪ Solid rock ▪Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES ▪ Fast curing ▪ Standard guns can be used ▪ Medium to high load capacity ▪ ETA Approval available ▪ Suitable for cracked concrete ▪ Drinking Water certified ▪ LEED Attestation available ▪ Non-sag, even overhead ▪ Styrene-free ▪ Low odour ▪ Low wastage APPROVALS / CERTIFICATES ▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. ▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking ▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge                                                        12 cartridges per box Pallet: 75 boxes   For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Original price was: ر.س86.00.Current price is: ر.س84.00.Add to cart

SikaFloor -161

2-PART EPOXY PRIMER, LEVELLING MORTAR AND INTERMEDIATE LAYER   USES AND CHARACTERISTICS / ADVANTAGES Sikafloor®-161 may only be used by experienced professionals. For priming concrete substrates, cement screeds and epoxy mortars ▪For low to medium absorbent substrates ▪ Primer for the Sikafloor®-263 SL, Sikafloor®-264 economic flooring systems and Sikalastic®-800 series ▪ Binder for levelling mortars and mortar screeds ▪Intermediate layer underneath Sikafloor®-263 SL and  Sikafloor®-264 ▪ Low viscosity ▪ Excellent bond strength ▪ Short waiting times ▪ Multi-purpose Sikafloor®-161 is an economic, two part, low viscosityepoxy resin. Suitable for use in hot and tropical climatic conditions. ▪High quality epoxy primer for interior and exterior floors Primer composed of (A + B) ▪For preparing low and medium absorbent concrete substrates ▪A primer for economical flooring systems ▪Excellent bonding strength ▪Easy to apply with a roller multifunctional ▪It is used in concrete and natural stone Epoxy mortar ▪Self-leveling epoxy floor paint ▪Good penetration and adhesion ▪Primer for three compounds sikfloor 264, sikafloor 264 SG, and sikafloor 263 SL   For more information https://gcc.sika.com/content/dam/dms/gcc/s/sikafloor_-161.pdf

Original price was: ر.س780.00.Current price is: ر.س750.00.Add to cart

Sikafloor®-190 Screed

HEAVY DUTY EPOXY RESIN FLOOR SCREED Composition Epoxy resin and selected natural aggregates DESCRIPTION Sikafloor®-190 Screed is a three component solventfree mortar screed based on epoxy resins and specially graded aggregates. Suitable for use in hot and tropical and climatic conditions. USES Sikafloor®-190 Screed may only be used by experienced professionals. Sikafloor®-190 Screed is used as a non-slip and abrasion resistant epoxy resin flooring screed in applications such as: ▪ Flooring subject to moderate or heavy loading ▪ Workshop and factory floors ▪ Machine shops and warehouses ▪ Depots and loading ramps ▪ Hangars ▪ Car parks with higher anticipated load ▪ Stairs   CHARACTERISTICS / ADVANTAGES ▪ Easy and fast to apply ▪ Excellent adhesion to substrate ▪The screed may be mechanically smoothed using a plastic coated disk ▪ Non-slip, non-skid finish possible ▪ Excellent abrasion resistance ▪ High mechanical strength ▪ Permeable to water vapour ▪ Compatible with suitable Sikafloor® coatings   Packaging Component A                        2.41 kg unit Component B                        0.50 kg unit Component C                        25 kg bag

Original price was: ر.س230.00.Current price is: ر.س218.50.Add to cart

Home Category Products My account
3 ر.س342.00
Select your currency
SAR Saudi riyal
3
  • Item added to cart
3
Your Cart
SikaSwell® A
Price: ر.س250.00
- +
ر.س250.00
Sikadur 509 Aggregate
Price: ر.س46.00
- +
ر.س46.00
Sikadur 506 Aggregate
Price: ر.س46.00
- +
ر.س46.00
    Apply Coupon