المتجر - Sika Building trust

All Products

Sikalastic®-152 SA

FIBRE-REINFORCED CEMENTITIOUS MORTAR FOR FLEXIBLE WATERPROOFING AND CONCRETE PROTECTION Composition:- Cement modified with polymers, selected alkali-resistant aggregates, microsilica and fibres DESCRIPTION Sikalastic®-152 SA is a 2-component, crack-bridging, fibre-reinforced cementitious mortar, with low elastic modulus with special additives for waterproofing and protection of concrete subgrades subject to flexural strain. Suitable for use in hot and tropical climates. USES ▪Flexible waterproofing and protection of hydraulic structures such as basins, tanks, concrete piping, bridges and canals ▪Waterproofing of bathrooms, shower, terraces, balconies, swimming pools before the application of ceramic tiles bonded with adhesives ▪ Waterproofing and protection of outer walls to be buried into the ground ▪ Inside waterproofing of light counter pressure water of walls and floors in basements CHARACTERISTICS / ADVANTAGES ▪Flexible waterproofing and concrete protection in one product ▪ Very good crack-bridging abilities ▪ Reliable application also in very humid environment ▪All components ready delivered, no additional mixing water required ▪ Applicable also on lightly humid substrate ▪ Non sagging: easy application also on vertical walls ▪Excellent adhesion onto lots of substrates such as concrete, cement mortars, stone, masonry Packaging Ready batched 33 kg units: Comp. A (liquid): 8 kg Comp. B (powder): 25 kg For more information https://gcc.sika.com/content/dam/dms/gcc/0/sikalastic_-152_sa.pdf

Original price was: ر.س253.00.Current price is: ر.س225.00.Add to cart

SikaLatex 200 Liter

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE Composition:- Styrene butadiene emulsion DESCRIPTION SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Suitable for use in hot and tropical climatic conditions. Sika latex is added to (Portland cement + quartz sand + water). USES SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications: ▪ Grouts and screeds ▪ Patch repair mortars ▪ Mansonry mortars ▪ Renders ▪ Tile adhesives CHARACTERISTICS / ADVANTAGES The main advantages of SikaLatex® are: ▪ Increased adhesion ▪ Reduced shrinkage and cracking ▪ Increased abrasion resistance ▪ Reduced permeability ▪ Improved workability ▪ User friendly ▪ Suitable on most common construction substrates SUSTAINABILITY SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Original price was: ر.س2,250.00.Current price is: ر.س2,185.00.Add to cart

SikaLatex 25 Liter

Original price was: ر.س327.25.Current price is: ر.س304.75.Add to cart

SikaLatex 5 Liter

Original price was: ر.س97.75.Current price is: ر.س86.25.Add to cart

SikaRep® Fine SA 25Kg

ONE COMPONENT, ECONOMICAL, POLYMER MODIFIED, PORE SEALER / FINISHING MORTAR Composition:- Polymer containing cementitious mortar with different additives. DESCRIPTION SikaRep® Fine SA is a cementitious, silica fume containing, polymer modified one component pore sealer and finishing mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® Fine SA can be used as a: ▪Pore sealer / finishing mortar on cementitious substrates. ▪Thin layer rendering on horizontal and vertical areas in building and civil engineering construction, for external and internal finishing etc. ▪Levelling mortar on uneven substrates, and profiled concrete surfaces. ▪ Repair mortar to fill honeycombing pores etc. ▪Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings. CHARACTERISTICS / ADVANTAGES ▪ Easy to use ▪ Excellent workability ▪ Good mechanical strengths ▪ Can be applied by the wet-spray method ▪ Non-corrosive ▪ Adjustable consistency ▪ Economical Soft, smooth, ready-to-use repair mortar for concrete containing steam, silica and organic matter Used for filling and nesting gaps between 1 - 10 mm Polymer-modified cementitious sealant to be mixed with water, grouting mechanics, 7.5 liters per 25 kilos Closing pores and leveling different surfaces Restoration of capillary cracks and micro voids End repair works, joint joints and equal bends in concrete surfaces Homogeneous texture and resistance to mechanical stresses Can be sprayed with a vacuum gun Friendly, non-toxic and non-toxic economic Indoor and outdoor installation Vertical and horizontal

Original price was: ر.س63.00.Current price is: ر.س57.00.Add to cart

SikaRep® SA

MULTI-PURPOSE, ECONOMICAL, PATCHING AND REPAIR MORTAR Composition:- Polymer containing cementitious mortar with different additives DESCRIPTION SikaRep® SA is a cementitious, silica fume and polymer containing, one-component repair mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications. CHARACTERISTICS / ADVANTAGES ▪ Easy to mix, apply and finish ▪ Good adhesion ▪ Shrinkage compensated ▪ Compatible with the properties of typical concretes ▪ Low water absorption, but vapour permeable ▪ Non-corrosive ▪ Excellent chloride and carbonation resistance

Original price was: ر.س63.25.Current price is: ر.س56.00.Add to cart

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: ر.س287.00.Current price is: ر.س284.00.Add to cart

SikaTop® Seal-107

Flexible, waterproofing and protective slurry mortar SikaTop® Seal 107 is a two-component, polymer-modified, cementitious waterproofing and protective slurry mortar and Protective Coating for concrete. It is slightly flexible to tolerate fine cracks and suitable in both interior and exterior applications. CHARACTERISTICS / ADVANTAGES SikaTop® Seal 107 provides the following beneficial properties: 1- Improves the watertightness of water-containing concrete tanks, reservoirs, and clearwells. 2- Protects against water penetration, yet water vapor permeable (breathable). 3- Excellent freeze/thaw resistance. 4- Good adhesion to sound, prepared substrates. 5- Easy and fast mixing and application. 6- Good abrasion resistance. 7- Protects against concrete carbonation (80 mils SikaTop® Seal 107 is equivalent to 6 inches of concrete). 8- Can be mixed to slurry or trowelable consistency. 9- Improves concrete/masonry appearance. 10- Available in concrete gray and off-white. 11- SikaTop® Seal 107 is ANSI/NSF 61 potable water compliant. 12- Easy to apply by brush or in thin trowel applications 13- Prebatched components with consistance quality 14- Hand or spray applied 15- Increased frost and salt resistance 16- Very good adhesion 17- Protects against concrete carbonation 18- Protects against water penetration 19- Non toxic – approved for contact with drinking water 20- Non-corrosive to steel or iron 21- Overpaintable USES 1-Horizontal surfaces subjected to light foot traffic (balconies). 2- For waterproofing of drinking water, tanks, reservoirs, and clear wells. 3-For internal and external waterproofing and damp-proofing concrete, mortar blockwork and brickwork. 4-For protection of concrete structures against the deleterious effects of deicing salts and freeze/thaw cycles. 5-For sealing “hairline” cracks in concrete structures not subject to movement surfaces. 6-For interior and exterior waterproofing of basements. 7-Vertical surfaces 8-Potable concrete water tanks/reservoirs 9- Basements and cellars 10- Terraces and balconies 11- Retaining walls 12- Swimming pools and fountains 13- RC gutters and planter boxes 14- Bathroom/toilets 15- Lift pits 16- Seawalls 17-Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork 18- Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack 19- Rigid waterproofing of basement walls in new construction and refurbishment 20- Positive and negative pressure waterproofing 21-Pore / blowhole filling 22- Sealing fine “hairline” cracks in concrete structures (not subject to movement) 23- Levelling mortar for concrete repair works/imperfections 24- Protection against ingress For more information https://chorkeematerial.files.wordpress.com/2017/12/sikatop-seal-107.pdf OR https://usa.sika.com/content/dam/dms/us01/d/pds-cpd-SikaTopSeal%20107-us.pdf

Original price was: ر.س109.00.Current price is: ر.س105.00.Add to cart

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings CHARACTERISTICS / ADVANTAGES ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use Packaging 20, 40 kg bag For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: ر.س57.50.Current price is: ر.س55.20.Add to cart

Main Menu