1
$15.97
2-COMPONENT THIXOTROPIC EPOXY ADHESIVE
Composition:- Epoxy resin
DESCRIPTION
Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C.
Suitable for use in hot and tropical conditions.
USES
Sikadur®-31 CF Slow may only be used by experienced professionals.
As a structural adhesive and mortar for:
Concrete elements
Hard natural stone
Ceramics, fibre cement
Mortar, bricks, masonry
Steel, iron, aluminium
Wood
Polyester, epoxy
Glass
As a fast setting rapid repair adhesive and mortar:
Corners and edges
Holes and void filling
For vertical and overhead use
As a joint filling and crack sealing:
Joint arris repair and crack sealing
CHARACTERISTICS / ADVANTAGES
Sikadur®-31 CF Slow has the following advantages:
Easy to mix and apply
Very good adhesion to most construction materials
High strength adhesive
Thixotropic: non-sag in vertical and overhead applications
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Good abrasion resistance
Impermeable to liquids and water vapour
Good chemical resistance
Packaging
Component A: Component B: A+B set
0.800Kg 0.400 kg 1.2 kg
4 kg 2 kg 6 kg
8 kg 4 kg 12 kg
For more information
https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_
$25.56 Original price was: $25.56.$22.89Current price is: $22.89.Add to cart
2-part High-build Solvent Free Epoxy Coating - Pigmented epoxy resin
DESCRIPTION
Sikafloor®-264 SG is a two-part, high-build, solvent free, coloured epoxy resin.
Suitable for use in hot and tropical climatic conditions.
USES
Sikafloor®-264 SG may only be used by experienced professionals.
Sikafloor®-264 SG can be used as a:
Roller coat for concrete and cement screeds with normal up to medium heavy wear for example storage and assembly halls, maintenance workshops, garages and loading ramps.
A broadcast system for multi-storey and underground car parks, maintenance hangars and for wet process areas, for example beverage and food industry.
CHARACTERISTICS / ADVANTAGES
Good chemical and mechanical resistance
Easy application
Economical
Liquid proof
Gloss finish
High Slip resistant surface when broadcasted
A two-component epoxy paint (A + B), solvent-free for construction and fixation
A colored paint applied by roller to cement surfaces
Gives a flat, hardened surface
The concentration of the epoxy is very high
It is applied to the internal surfaces
Applied in two stages or two layers 2
Primer 161 is leveled and used in heavy duty places such as:
Garages and ground or multi-storey car parks
Factories
Maintenance workshops and loading ramps
Maintenance sheds
Wet processing areas such as beverage, food and pharmaceutical industries
Mechanical rooms and storage areas in administrative buildings, halls, exhibitions and showrooms such as commercial malls
Economical and liquid resistant
Non-slip, easy to clean and maintain
For more information
https://gcc.sika.com/content/dam/dms/gcc/2/sikafloor_-264_sg.pdf
$199.66 Original price was: $199.66.$189.01Current price is: $189.01.Add to cart
2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT
Composition OF Polyurethane
DESCRIPTION
Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes.
Suitable for use in hot and tropical climatic conditions.
USES
Sikafloor®-359 BH may only be used by experienced professionals.
Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring
Particularly suitable for car park decks, ramps and warehouses etc.
CHARACTERISTICS / ADVANTAGES
Tough-elastic
UV resistant
Good mechanical and chemical resistance
Watertight
Non-yellowing
Easy application
Slip resistant surface possible
Easy to clean and maintain
Packaging
Part A: 16.5 kg containers
Part B: 3.5 kg containers
Part A + B: 20.0 kg ready to mix units
$306.14 Original price was: $306.14.$298.49Current price is: $298.49.Add to cart
Sorry, this entry is only available in Arabic.
$18.63 Original price was: $18.63.$15.97Current price is: $15.97.Add to cart
Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish. Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc. Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic. Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags
$18.63 Original price was: $18.63.$16.77Current price is: $16.77.Add to cart
ECO-FRIENDLY LIQUID APPLIED WATERPROOFING SOLUTION BASED ON SIKA COELASTIC TECHNOLOGY (CET)
Composition:- Polyurethane modified Acrylic Dispersion
DESCRIPTION
Sikalastic® WR is a cold-applied, highly elastic, onecompont waterborne liquid applied waterproofing membrane.
Suitable for the use in hot and tropical climatic conditions.
USES
For the waterproofing of bathrooms, shower rooms, kitchens and plumbing rooms beneath hard protection, for example ceramic tiles
For waterproofing solutions in both new construction and refurbishment projects
For cost efficient waterproofing solution
CHARACTERISTICS / ADVANTAGES
Highly elastic and crack-bridging
One-component - ready to use
Excellent adhesion on porous and non-porous substrates
Seamless, fully bonded waterproofing membrane
Water vapour permeable
APPROVALS / CERTIFICATES
Conforms to the requirement of LEED EQ credit 4.2: Low - Emitting Materials. Paints and Coatings: VOC <
100 gm/l
Certified by Thomas Bell-Wright International Consultants according to ASTM E84-16 : Standard Test Method for Surface Burning Characteristic of Building Materials. Certificate number: TBW0300202
Packaging
20 kg plastic pails
For more information
https://gcc.sika.com/content/dam/dms/gcc/1/sikalastic_wr.pdf
$133.11 Original price was: $133.11.$129.11Current price is: $129.11.Add to cart
Eco-friendly Liquid Applied Roof Waterproofing Solution Based on Sika Co-Elastic Technology (CET)
Composition:- Polyurethane modified Acrylic Dispersion
DESCRIPTION
Sikalastic®-560 GCC is a cold-applied, one-component waterborne liquid applied waterproofing membrane,
highly elastic and UV-resistant.
Suitable for use in hot climatic conditions.
USES
For exposed roof waterproofing solutions in both new construction and refurbishment projects
For exposed roofs with many details and complex geometry when accessibility is limited
For cost efficient life cycle extension of failing exposed roofs
For reflective coating to enhance energy efficiency by reducing cooling costs
CHARACTERISTICS / ADVANTAGES
UV resistant and resistant to yellowing and weathering
Highly elastic and crack-bridging
Non-toxic and VOC compliant water based coating
One component - ready to use
Excellent adhesion on porous and non-porous substrates
Seamless, fully bonded waterproofing membrane
Water vapour permeable
APPROVALS / CERTIFICATES
Conforms to the requirements of LEED EQ Credit 4.2: Low - Emitting Materials: Paints & Coatings: VOC <
100 gm/l
USGBC LEED rating: conforms to LEED SS Credit 7.2 - Heat Island Effect-Roof, SRI ≥ 78
Conforms to Estidama requirements for reflectivity
Conforms to Dubai Green Buildings for reflectivity
Packaging
20 kg plastic pails
For more information
https://ken.sika.com/dms/getdocument.get/e101c1e1-bd9c-4c91-a6d9-e45085c80ce5/sikalastic-560-gcc.pdf
$133.11 Original price was: $133.11.$129.11Current price is: $129.11.Add to cart
INTEGRAL WATERPROOFING ADMIXTURE FOR MORTAR AND CONCRETE
Composition:- Blend of organic and inorganic chemicals
MORE DESCRIPTION
Sikalite® AE is a ready to use powdered waterproofing admixture for cement / sand mortars and concrete.
Suitable for use in hot and tropical climatic conditions.
USES
Sikalite® AE is used to provide waterproof structural concrete or cement/sand mortars, screeds and renders for walls, facades, floor toppings and jointing mortars.
CHARACTERISTICS / ADVANTAGES
Sikalite® AE contains pore sealing and water-repelling substances which provide the following beneficial properties:
Reduction in permeability
Increased durability
Used in concrete mortar
Indoor and Outdoor
Floors and walls
Embodiment and strengthening of walls, facades and floors
Packaging
20 kg bags
For more information
https://gcc.sika.com/content/dam/dms/gcc/3/sikalite_ae.pdf
$15.31 Original price was: $15.31.$13.16Current price is: $13.16.Add to cart
SikaSwell® A Hydrophilic swellable joint sealing profiles SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Usage Joint sealing: Construction joints Pipe and steel work penetrations through walls and floor slabs Around all types of penetrations and connection joints Construction joints in cable ducts Advantages Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Can be applied on different substrates BBA system approvals with SikaSwell S-2 Available in different sizes
$70.55 Original price was: $70.55.$66.55Current price is: $66.55.Add to cart
ACETOXY SILICONE SEALANT FOR GLAZING AND WEATHERPROOFING DESCRIPTION Sikasil® Universal is a 1-component, solvent-free sealant for indoor and outdoor applications. USES Sikasil® Universal is designed for glazing and weatherproofing applications on non-porous substrates such as glass or glazed ceramic tiles. CHARACTERISTICS / ADVANTAGES Low-modulus High elasticity and flexibility Very good resistance to shrinkage, cracking and discoloration Very good adhesion to a variety of non-porous substrates For more information click the link https://grc.sika.com/content/dam/dms/gr01/s/020514030000000085_Sikasil_Universal_eng.pdf
$4.15 Original price was: $4.15.$3.73Current price is: $3.73.Add to cart
ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS
MORE DESCRIPTION
Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions.
USES
Sika AnchorFix®-2+ Tropical may only be used by experienced professionals.
As a fast curing anchoring adhesive for all grades of:
Rebars / reinforcing steel
Threaded rods
Bolts and special fastening systems
Concrete
Solid masonry
Steel
Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface
staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation
of possible substrates, particularly in terms of
strength, composition and porosity:
Hard natural stone
Solid rock
Component A : Component B = 10 : 1 by volume
CHARACTERISTICS / ADVANTAGES
Fast curing
Standard guns can be used
Medium to high load capacity
ETA Approval available
Suitable for cracked concrete
Drinking Water certified
LEED Attestation available
Non-sag, even overhead
Styrene-free
Low odour
Low wastage
APPROVALS / CERTIFICATES
Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020,
certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking.
Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of
Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020,
certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking
Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543
Packaging
300 mL standard cartridge 12 cartridges per box
Pallet: 75 boxes
For more information
https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf
$22.89 Original price was: $22.89.$22.36Current price is: $22.36.Add to cart
CURING COMPOUND, PRIMER, SEALER AND SURFACE HARDENER FOR FRESHLY LAID CONCRETE
Composition:- Aqueous solution of acrylic copolymer dispersion
DESCRIPTION
Sika® Antisol® WB is a ready to use, solvent free, water based liquid curing compound for preventing the
evaporation of mixing water in concrete. It is ready for use and simple to apply.
Suitable for use in hot and tropical climatic conditions.
USES
Sika® Antisol® WB can be applied on site and in precast plants. It has been specially developed for use as a high quality curing and sealing compound for interior or exterior applications.
Sika® Antisol® WB is suitable for all kinds of concrete, horizontal and vertical applications and large areas of
exposed concrete, such as:
Highways
Runways and taxiways
Aprons and hard standings
Roof decks
Pre-stressed beams and piers
Irrigation canals / channels
CHARACTERISTICS / ADVANTAGES
Sika® Antisol® WB has the following characteristics:
Reduces incidence of plastic cracking
Forms stable film on the surface to provide excellent curing and sealing properties
Ensure achievement of desired strengths, minimize shrinkage
Alleviates other costly methods such as Hessian – watering
Increases frost resistance
Reduces dusting. Seals, primes and hardnens cement based compositions
Non-flammable, non-toxic and non-staining
Considerable reduction in loss of water from concrete
Cured film acts as primer between concrete surface and coating material
Packaging
20 L cans
200 L drums
$319.45 Original price was: $319.45.$308.80Current price is: $308.80.Add to cart
GENERAL PURPOSE, CEMENTITIOUS TILE ADHESIVE FOR THIN BED APPLICATION FOR SMALL
AND MEDIUM TILES
Composition:- Portland cement, selected aggregates
MORE DESCRIPTION
SikaCeram®-102 SA is one-pack premixed adhesive consisting of high resistance cements, selected silicon/quartz mineral charges and specific additives, used as thin bed tile adhesive for permanent fixing of ceramic tiles. It is ready to use with the addition of water.
Suitable for use in hot and tropical climatic conditions.
USES
Suitable for bonding high absorption ceramic tiles
Indoor application without primer over concrete, cement mortars, bricks
Suitable for floor and wall applications
Suitable for moisture tolerant natural stone
CHARACTERISTICS / ADVANTAGES
Very good adhesion to most substrates (concrete, cementitious mortar, stone, bricks)
Easy to mix and use
Excellent workability and thixotropic consistency
Single component system
Minimized sagging with small format tiles
APPROVALS / CERTIFICATES
SikaCeram®-102 SA follows the main requirements of EN 12004 class C1 T and complies to the requirements
of ANSI 118.4 for shear strength.
Packaging
20, 50 kg bag
For more Information
https://gcc.sika.com/content/dam/dms/gcc/z/sikaceram_-102_sa.pdf
$6.92 Original price was: $6.92.$6.12Current price is: $6.12.Add to cart
EASY TO APPLY TILE ADHESIVE FOR MEDIUM SIZED CERAMIC TILES
Composition:- Portland cement, selected aggregates
MORE DESCRIPTION
SikaCeram®-103 Easy SA is a cement-based powder adhesive to easily lay small to medium sized ceramic
tiles.
Suitable for walls and floors
Inside and outside of residential properties.
It can be used in layers up to 10 mm thick.
For use in hot and tropical climatic conditions.
USES
SikaCeram®-103 Easy SA is suitable for bonding all kinds of ceramic tiles. SikaCeram®-103 Easy SA can be
used indoors and outdoors for wall or floor applications, on the following substrate surfaces:
Gypsum based substrates in dry areas
Cement based substrates like concrete & renders
Suitable for moisture tolerant natural stone
CHARACTERISTICS / ADVANTAGES
Very good adhesion to most substrates (concrete, cementitious mortar, stone, bricks)
Very easy to mix and use
Excellent workability and thixotropic consistency
Single component system
Non sagging with medium to small format tiles
APPROVALS / CERTIFICATES
SikaCeram®-103 Easy SA follows the main requirements of EN 12004 class C1 TE and complies to the requirements of ANSI 118.4 for shear strength.
Packaging
20 kg Bag WHITE
Fot more information
https://gcc.sika.com/content/dam/dms/gcc/h/sikaceram-103-easysa.pdf
$7.19 Original price was: $7.19.$6.66Current price is: $6.66.Add to cart
HIGH PERFORMANCE, POLYMER CONTAINING, WATER RESISTANT CEMENTITIOUS ADHESIVE
FOR THIN BED APPLICATION OF MEDIUM AND LARGE TILES
Composition:- Portland cement, selected aggregates and polymers
MORE DESCRIPTION
SikaCeram®-202 SA is a high performance, one-pack, polymer containing, water resistant, premixed adhesive. Consisting of high resistance cements, selected silicon / quartz mineral charges and specific additives, used as thin bed tile adhesive for permanent fixing of ceramic tiles.
Suitable for use in hot and tropical climatic conditions.
USES
Suitable for bonding of high absorption ceramic tiles, earthenware, extruded and refined porcelain tiles
Suitable for bonding of large size tiles used in industial enviroment, wet areas, swimming pools, facades
Suitable for bathrooms, kitchens, balconies, terraces, etc.
Indoor and outdoor application over concrete, cement mortars, bricks and plaster
For horizontal and vertical areas
Suitable for moisture tolerant natural stone
Suitable to tile directly on various Sika waterproofing products
CHARACTERISTICS / ADVANTAGES
Very good adhesion
Easy to mix and use
Excellent workability and thixotropic consistency
Water resistant
Extended open time
Single component system
APPROVALS / CERTIFICATES
SikaCeram®-202 SA follows the requirements of EN 12004 class C2 E and complies to the requirements of ANSI 118.4 for shear strength.
Packaging
20 kg bag
For more information
https://gcc.sika.com/content/dam/dms/gcc/z/sikaceram_-202_sa.pdf
$9.18 Original price was: $9.18.$8.52Current price is: $8.52.Add to cart
CEMENT BASED, DEFORMABLE, HIGH PERFORMANCE TILE ADHESIVE
High performance Cement base adhesive with no vertical slip and extended open time. C2TE classified according to EN 12004
Composition:- Portland cement, selected aggregates and polymers
MORE DESCRIPTION
SikaCeram®-255 StarFlex LD AE is a cement-based, high performance, polymer containing, deformable, one-pack tile adhesive. It can be used in layers up to 10 mm. SikaCeram®-255 StarFlex LD AE is suitable for setting all kind of tiles on both floors and walls, inside and outside for residential and commercial areas on heated floors, balconies, terraces and swimming pools.
Suitable for use in hot and tropical climatic conditions.
USES
Suitable for bonding of high absorption ceramic tiles, earthenware, extruded and refined porcelain tiles
Suitable for bonding of large size tiles used in industial enviroment, wet areas, swimming pools, etc.
Suitable for bathrooms, kitchens, balconies, terraces, etc.
Indoor and outdoor application over concrete, cement mortars, bricks and plaster
Suitable for indoor application over various types of drywalls
Suitable for moisture tolerant natural stone
Suitable to tile directly on various Sika waterproofing products
CHARACTERISTICS / ADVANTAGES
Very good adhesion
Easy to mix and use
Excellent workability and thixotropic consistency
Water resistant
Extended open time
Single component system
Deformable
No vertical slipping
Smooth application
7.0 to 7.5 L of water per 25 kg bag
SUSTAINABILITY
SikaCeram®-255 StarFlex LD AE is certified according "Low Emitting Materials as per Al Sa'fat - Dubai
Green Building Evaluation System" by Dubai Central Laboratory (DCL), certificate No. CL17020432
California Department of Public Health (CDPH) Method - VOC emission test: PASS
APPROVALS / CERTIFICATES
SikaCeram®-255 StarFlex LD AE follows the main requirements of EN 12004 and ISO 13007-1 for class C2 TE S1 and main requirements of ANSI 118.15, ANSI 118.4 and ANSI 118.1
Packaging
25 kg bag
For more information
https://gcc.sika.com/content/dam/dms/gcc/h/sikaceram_-255_starflexldae.pdf
$24.49 Original price was: $24.49.$19.97Current price is: $19.97.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
