Main Menu

0 Wishlist
1 $58.17
Sale!

SikaSwell® A

Original price was: $70.55.Current price is: $66.55.

(العربية) مادة تتمدد و تنتفخ عند ملامسة الماء

25 in stock

Categories: , ,

Description

SikaSwell® A

Hydrophilic swellable joint sealing profiles

SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures.

  •  Highly economical joint sealing solution
  •  Unique properties fill small cracks and voids
  •  Versatile solution for joints and details

  •  Permanently water resistant (wet & dry cycles)
  •  Resistant to various chemical substances
  •  Easy and fast to apply

Usage

Joint sealing:

  • Construction joints
  • Pipe and steel work penetrations through walls and floor slabs
  • Around all types of penetrations and connection joints
  • Construction joints in cable ducts

 

Advantages

  • Highly economical joint sealing solution
  • Unique properties fill small cracks and voids
  • Versatile solution for joints and details

  • Permanently water resistant (wet & dry cycles)
  • Resistant to various chemical substances
  • Easy and fast to apply
  • Can be applied on different substrates
  • BBA system approvals with SikaSwell S-2
  • Available in different sizes

 

Additional information

Dimensions 20 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “SikaSwell® A”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikalastic® WR

ECO-FRIENDLY LIQUID APPLIED WATERPROOFING SOLUTION BASED ON SIKA COELASTIC TECHNOLOGY (CET) Composition:- Polyurethane modified Acrylic Dispersion   DESCRIPTION  Sikalastic® WR is a cold-applied, highly elastic, onecompont waterborne liquid applied waterproofing membrane. Suitable for the use in hot and tropical climatic conditions. USES ▪For the waterproofing of bathrooms, shower rooms, kitchens and plumbing rooms beneath hard protection, for example ceramic tiles ▪For waterproofing solutions in both new construction and refurbishment projects ▪ For cost efficient waterproofing solution CHARACTERISTICS / ADVANTAGES ▪ Highly elastic and crack-bridging ▪ One-component - ready to use ▪Excellent adhesion on porous and non-porous substrates ▪ Seamless, fully bonded waterproofing membrane ▪ Water vapour permeable APPROVALS / CERTIFICATES ▪Conforms to the requirement of LEED EQ credit 4.2: Low - Emitting Materials. Paints and Coatings: VOC < 100 gm/l ▪Certified by Thomas Bell-Wright International Consultants according to ASTM E84-16 : Standard Test Method for Surface Burning Characteristic of Building Materials. Certificate number: TBW0300202 Packaging 20 kg plastic pails   For more information https://gcc.sika.com/content/dam/dms/gcc/1/sikalastic_wr.pdf

Original price was: $133.11.Current price is: $129.11.Add to cart

Sikadur 509 Aggregate

Selected grades of quartz sand for the application of special floors and a filler for the preparation of industrial coatings, to be added as a supporting compound for Sikafloor and Sikaguard products. Sikafloor® - 161 Sikafloor® - 264 Sikafloor® - 264 SG product characreristics  0.7 – 1.2 mm                         Grading 1.5 kg/Lt                                Bulk Density 25 kg bag                               Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf To return to List   Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit

Original price was: $13.78.Current price is: $12.25.Add to cart

Sikadur® PF

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair   CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance   Packaging Part A:                   4 kg container Part B:                   2 kg container (A + B)                  6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Original price was: $59.63.Current price is: $55.90.Add to cart

SikaFloor -263 SL

SELF-SMOOTHING PIGMENTED EPOXY RESIN FOR FLOORING APPLICATION Epoxy material consisting of three compounds (sikadur 504 + B + A) at a rate of  (25:1:1) free of solvents to give self-leveling colored floors Sikafloor®-263 SL is a two part (filler supplied separately), self-smoothing, pigmented, epoxy resin for flooring application. Suitable for use in hot and tropical climatic conditions. Product use and characteristics The thickness ranges from 1.5 mm to 5.0 mm on industrial floors that are subject to relatively heavy loads. Food, drug and chemical factories Electricity and water stations Laboratories and rooms exposed to radiation Exhibitions, presentation rooms, training and assembly halls Hard surfaces such as concrete and mortar Maintenance workshops Warehouses Garages and car parks hangars production areas Water and liquid insulator High compressive strength Solvent-free and non-flammable Economical and easy to apply, clean and maintain Highly fillable Good chemical and mechanical resistance Easy application Liquid proof Gloss finish Slip resistant surface possible   Sikafloor®-263 SL is used as self-smoothing system for concrete and cement screeds with medium to heavy wear, e.g. for: ▪ Storage warehouses ▪ Assembly halls ▪ Maintenance workshops ▪ Garages and car parks ▪ Loading bays ▪ Aircraft hangars ▪ Plant rooms ▪ Clean rooms ▪ Production areas ▪ Dry food processing plants ▪ Pharmaceutical manufacturing   For more information https://gcc.sika.com/content/dam/dms/gcc/x/sikafloor_-263_sl.pdf

Original price was: $216.96.Current price is: $207.64.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
1 $58.17
Select your currency
USD United States (US) dollar
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
Sikafloor®-190 Screed
Price: $58.17
- +
$58.17
Have a Promo Code?
Subtotal $58.17
Continue Shoppingمعاينة السلهانهاء الطلب
    Apply Coupon