Sale!

SikaSwell® A

Original price was: ر.س265.00.Current price is: ر.س250.00.

(العربية) مادة تتمدد و تنتفخ عند ملامسة الماء

25 in stock

Description

SikaSwell® A

Hydrophilic swellable joint sealing profiles

SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures.

  •  Highly economical joint sealing solution
  •  Unique properties fill small cracks and voids
  •  Versatile solution for joints and details

  •  Permanently water resistant (wet & dry cycles)
  •  Resistant to various chemical substances
  •  Easy and fast to apply

Usage

Joint sealing:

  • Construction joints
  • Pipe and steel work penetrations through walls and floor slabs
  • Around all types of penetrations and connection joints
  • Construction joints in cable ducts

 

Advantages

  • Highly economical joint sealing solution
  • Unique properties fill small cracks and voids
  • Versatile solution for joints and details

  • Permanently water resistant (wet & dry cycles)
  • Resistant to various chemical substances
  • Easy and fast to apply
  • Can be applied on different substrates
  • BBA system approvals with SikaSwell S-2
  • Available in different sizes

 

Additional information

Dimensions 20 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “SikaSwell® A”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sika AnchorFix®-2+ Tropical

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: ▪ Rebars / reinforcing steel ▪ Threaded rods ▪ Bolts and special fastening systems ▪ Concrete ▪ Solid masonry ▪ Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ▪ Hard natural stone ▪ Solid rock ▪Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES ▪ Fast curing ▪ Standard guns can be used ▪ Medium to high load capacity ▪ ETA Approval available ▪ Suitable for cracked concrete ▪ Drinking Water certified ▪ LEED Attestation available ▪ Non-sag, even overhead ▪ Styrene-free ▪ Low odour ▪ Low wastage APPROVALS / CERTIFICATES ▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. ▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking ▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge                                                        12 cartridges per box Pallet: 75 boxes   For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Original price was: ر.س86.00.Current price is: ر.س84.00.Add to cart

SikaFloor -161

2-PART EPOXY PRIMER, LEVELLING MORTAR AND INTERMEDIATE LAYER   USES AND CHARACTERISTICS / ADVANTAGES Sikafloor®-161 may only be used by experienced professionals. For priming concrete substrates, cement screeds and epoxy mortars ▪For low to medium absorbent substrates ▪ Primer for the Sikafloor®-263 SL, Sikafloor®-264 economic flooring systems and Sikalastic®-800 series ▪ Binder for levelling mortars and mortar screeds ▪Intermediate layer underneath Sikafloor®-263 SL and  Sikafloor®-264 ▪ Low viscosity ▪ Excellent bond strength ▪ Short waiting times ▪ Multi-purpose Sikafloor®-161 is an economic, two part, low viscosityepoxy resin. Suitable for use in hot and tropical climatic conditions. ▪High quality epoxy primer for interior and exterior floors Primer composed of (A + B) ▪For preparing low and medium absorbent concrete substrates ▪A primer for economical flooring systems ▪Excellent bonding strength ▪Easy to apply with a roller multifunctional ▪It is used in concrete and natural stone Epoxy mortar ▪Self-leveling epoxy floor paint ▪Good penetration and adhesion ▪Primer for three compounds sikfloor 264, sikafloor 264 SG, and sikafloor 263 SL   For more information https://gcc.sika.com/content/dam/dms/gcc/s/sikafloor_-161.pdf

Original price was: ر.س780.00.Current price is: ر.س750.00.Add to cart

SikaTop® Seal-107

Flexible, waterproofing and protective slurry mortar SikaTop® Seal 107 is a two-component, polymer-modified, cementitious waterproofing and protective slurry mortar and  Protective Coating for concrete. It is slightly flexible to tolerate fine cracks and suitable in both interior and exterior applications. CHARACTERISTICS / ADVANTAGES SikaTop® Seal 107 provides the following beneficial properties: 1- Improves the watertightness of water-containing concrete tanks, reservoirs, and clearwells. 2- Protects against water penetration, yet water vapor permeable (breathable). 3- Excellent freeze/thaw resistance. 4- Good adhesion to sound, prepared substrates. 5- Easy and fast mixing and application. 6- Good abrasion resistance. 7- Protects against concrete carbonation (80 mils SikaTop® Seal 107 is equivalent to 6 inches of concrete). 8- Can be mixed to slurry or trowelable consistency. 9- Improves concrete/masonry appearance. 10- Available in concrete gray and off-white. 11- SikaTop® Seal 107 is ANSI/NSF 61 potable water compliant. 12- Easy to apply by brush or in thin trowel applications 13- Prebatched components with consistance quality 14- Hand or spray applied 15- Increased frost and salt resistance 16- Very good adhesion 17- Protects against concrete carbonation 18- Protects against water penetration 19- Non toxic – approved for contact with drinking water 20- Non-corrosive to steel or iron 21- Overpaintable USES 1-Horizontal surfaces subjected to light foot traffic (balconies). 2- For waterproofing of drinking water, tanks, reservoirs, and clear wells. 3-For internal and external waterproofing and damp-proofing concrete, mortar blockwork and brickwork. 4-For protection of concrete structures against the deleterious effects of deicing salts and freeze/thaw cycles. 5-For sealing “hairline” cracks in concrete structures not subject to movement surfaces. 6-For interior and exterior waterproofing of basements. 7-Vertical surfaces 8-Potable concrete water tanks/reservoirs 9- Basements and cellars 10- Terraces and balconies 11- Retaining walls 12- Swimming pools and fountains 13- RC gutters and planter boxes 14- Bathroom/toilets 15- Lift pits 16- Seawalls 17-Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork 18- Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack 19- Rigid waterproofing of basement walls in new construction and refurbishment 20- Positive and negative pressure waterproofing 21-Pore / blowhole filling 22- Sealing fine “hairline” cracks in concrete structures (not subject to movement) 23- Levelling mortar for concrete repair works/imperfections 24- Protection against ingress       For more information https://chorkeematerial.files.wordpress.com/2017/12/sikatop-seal-107.pdf OR https://usa.sika.com/content/dam/dms/us01/d/pds-cpd-SikaTopSeal%20107-us.pdf

Original price was: ر.س109.00.Current price is: ر.س105.00.Add to cart

SikaFloor -264 SG

2-part High-build Solvent Free Epoxy Coating - Pigmented epoxy resin   DESCRIPTION Sikafloor®-264 SG is a two-part, high-build, solvent free, coloured epoxy resin. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-264 SG may only be used by experienced professionals. Sikafloor®-264 SG can be used as a: Roller coat for concrete and cement screeds with normal up to medium heavy wear for example storage and assembly halls, maintenance workshops, garages and loading ramps.  A broadcast system for multi-storey and underground car parks, maintenance hangars and for wet process areas, for example beverage and food industry. CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Economical ▪ Liquid proof ▪ Gloss finish ▪ High Slip resistant surface when broadcasted ▪A two-component epoxy paint (A + B), solvent-free for construction and fixation ▪A colored paint applied by roller to cement surfaces ▪Gives a flat, hardened surface ▪The concentration of the epoxy is very high ▪It is applied to the internal surfaces ▪Applied in two stages or two layers 2 ▪Primer 161 is leveled and used in heavy duty places such as: ▪Garages and ground or multi-storey car parks ▪Factories ▪Maintenance workshops and loading ramps ▪Maintenance sheds ▪Wet processing areas such as beverage, food and pharmaceutical industries ▪Mechanical rooms and storage areas in administrative buildings, halls, exhibitions and showrooms such as commercial malls ▪Economical and liquid resistant ▪Non-slip, easy to clean and maintain   For more information  https://gcc.sika.com/content/dam/dms/gcc/2/sikafloor_-264_sg.pdf

Original price was: ر.س750.00.Current price is: ر.س710.00.Add to cart

Home Category Products My account
1 ر.س425.00
Select your currency
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
Sika® Injection-107
Price: ر.س425.00
- +
ر.س425.00
    Apply Coupon