Sale!

SikaSwell® A

Original price was: $70.55.Current price is: $66.55.

(العربية) مادة تتمدد و تنتفخ عند ملامسة الماء

25 in stock

Description

SikaSwell® A

Hydrophilic swellable joint sealing profiles

SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures.

  •  Highly economical joint sealing solution
  •  Unique properties fill small cracks and voids
  •  Versatile solution for joints and details

  •  Permanently water resistant (wet & dry cycles)
  •  Resistant to various chemical substances
  •  Easy and fast to apply

Usage

Joint sealing:

  • Construction joints
  • Pipe and steel work penetrations through walls and floor slabs
  • Around all types of penetrations and connection joints
  • Construction joints in cable ducts

 

Advantages

  • Highly economical joint sealing solution
  • Unique properties fill small cracks and voids
  • Versatile solution for joints and details

  • Permanently water resistant (wet & dry cycles)
  • Resistant to various chemical substances
  • Easy and fast to apply
  • Can be applied on different substrates
  • BBA system approvals with SikaSwell S-2
  • Available in different sizes

 

Additional information

Dimensions 20 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “SikaSwell® A”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikagard® PW

Chemical Resistant Epoxy Coating Composition:- Epoxy resin DESCRIPTION Sikagard® PW is a two component, solvent free epoxy coating with outstanding mechanical and chemical properties. Suitable for use in hot and tropical climatic conditions. USES Sikagard® PW may only be used by experienced professionals. ▪Chemical resistant protective layer on concrete, structural cementitious mortars, epoxy cement, epoxy resin based products and steel ▪Protection of concrete surfaces / foundations below ground level ▪ Lining in storage tanks, manholes, intakes and silos etc. ▪ Anti-corrosion coating on steel in food processing plants, sewage works, farms, agricultural enterprises, chemical and pharmaceutical facilities and beverage industry CHARACTERISTICS / ADVANTAGES ▪ Suitable for direct contact with potable water ▪ Easy to clean, tough glossy finish Very good resistance to a wide range of chemicals and corrosive vapours ▪ Sewage resistant ▪ Good mechanical and chemical resistance ▪ High build ▪ Impervious to liquids SUSTAINABILITY Sikagard® PW is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432       For more information https://gcc.sika.com/dms/getdocument.get/8ea6fab1-e9ef-4b72-a1b5-00621830c5b1/sikagard_pw.pdf

Original price was: $174.37.Current price is: $171.71.Add to cart

SikaFloor -161

2-PART EPOXY PRIMER, LEVELLING MORTAR AND INTERMEDIATE LAYER   USES AND CHARACTERISTICS / ADVANTAGES Sikafloor®-161 may only be used by experienced professionals. For priming concrete substrates, cement screeds and epoxy mortars ▪For low to medium absorbent substrates ▪ Primer for the Sikafloor®-263 SL, Sikafloor®-264 economic flooring systems and Sikalastic®-800 series ▪ Binder for levelling mortars and mortar screeds ▪Intermediate layer underneath Sikafloor®-263 SL and  Sikafloor®-264 ▪ Low viscosity ▪ Excellent bond strength ▪ Short waiting times ▪ Multi-purpose Sikafloor®-161 is an economic, two part, low viscosityepoxy resin. Suitable for use in hot and tropical climatic conditions. ▪High quality epoxy primer for interior and exterior floors Primer composed of (A + B) ▪For preparing low and medium absorbent concrete substrates ▪A primer for economical flooring systems ▪Excellent bonding strength ▪Easy to apply with a roller multifunctional ▪It is used in concrete and natural stone Epoxy mortar ▪Self-leveling epoxy floor paint ▪Good penetration and adhesion ▪Primer for three compounds sikfloor 264, sikafloor 264 SG, and sikafloor 263 SL   For more information https://gcc.sika.com/content/dam/dms/gcc/s/sikafloor_-161.pdf

Original price was: $207.64.Current price is: $199.66.Add to cart

Sikadur® PF

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair   CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance   Packaging Part A:                   4 kg container Part B:                   2 kg container (A + B)                  6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Original price was: $59.63.Current price is: $55.90.Add to cart

Sikalastic®-560 GCC

Eco-friendly Liquid Applied Roof Waterproofing Solution Based on Sika Co-Elastic Technology (CET) Composition:- Polyurethane modified Acrylic Dispersion DESCRIPTION Sikalastic®-560 GCC is a cold-applied, one-component waterborne liquid applied waterproofing membrane, highly elastic and UV-resistant. Suitable for use in hot climatic conditions. USES ▪For exposed roof waterproofing solutions in both new construction and refurbishment projects ▪ For exposed roofs with many details and complex geometry when accessibility is limited ▪ For cost efficient life cycle extension of failing exposed roofs ▪ For reflective coating to enhance energy efficiency by reducing cooling costs CHARACTERISTICS / ADVANTAGES ▪UV resistant and resistant to yellowing and weathering ▪ Highly elastic and crack-bridging ▪ Non-toxic and VOC compliant water based coating ▪ One component - ready to use ▪Excellent adhesion on porous and non-porous substrates ▪ Seamless, fully bonded waterproofing membrane ▪ Water vapour permeable APPROVALS / CERTIFICATES ▪Conforms to the requirements of LEED EQ Credit 4.2: Low - Emitting Materials: Paints & Coatings: VOC < 100 gm/l ▪USGBC LEED rating: conforms to LEED SS Credit 7.2 - Heat Island Effect-Roof, SRI ≥ 78 ▪ Conforms to Estidama requirements for reflectivity ▪ Conforms to Dubai Green Buildings for reflectivity   Packaging 20 kg plastic pails   For more information https://ken.sika.com/dms/getdocument.get/e101c1e1-bd9c-4c91-a6d9-e45085c80ce5/sikalastic-560-gcc.pdf

Original price was: $133.11.Current price is: $129.11.Add to cart

Home Category Products My account
1 $22.36
Select your currency
USD United States (US) dollar
1
  • Item added to cart
1
Your Cart
2+ shoppers have bought this
Sika AnchorFix®-2+ Tropical
Price: $22.36
- +
$22.36
    Apply Coupon