Sale!

SikaLatex 5 Liter

Original price was: $26.02.Current price is: $22.96.

13 in stock

Description

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE

Composition:- Styrene butadiene emulsion

DESCRIPTION 

SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and
high quality site-mix mortars.
Suitable for use in hot and tropical climatic conditions.

Sika latex is added to (Portland cement + quartz sand + water).

USES

SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications:
▪ Grouts and screeds
▪ Patch repair mortars
▪ Mansonry mortars
▪ Renders
▪ Tile adhesives

CHARACTERISTICS / ADVANTAGES

The main advantages of SikaLatex® are:
▪ Increased adhesion
▪ Reduced shrinkage and cracking
▪ Increased abrasion resistance
▪ Reduced permeability
▪ Improved workability
▪ User friendly
▪ Suitable on most common construction substrates

SUSTAINABILITY

SikaLatex® is certified according “Low Emitting Materials as per Al Sa’fat – Dubai Green Building Evaluation
System” by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Additional information

Weight 5 kg

Related products

Related products

(العربية) Sikafloor 270 Level 25kg

Sorry, this entry is only available in Arabic.

Original price was: $18.63.Current price is: $15.97.Add to cart

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun   For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: $76.40.Current price is: $75.60.Add to cart

Sikacrete®-114 SA

FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR Composition:-  Portland cement, selected fillers and aggregates, special additives. DESCRIPTION Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete. Suitable for use in hot and tropical climatic conditions. USES Sikacrete®-114 SA is used for the structural repair of deteriorated concrete. ▪ Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. ▪ A typical application is the re-profiling of damaged concrete members, using formwork. ▪ Suitable for base plate grouting where thickness exceeds 100 millimetre. ▪ Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump   CHARACTERISTICS / ADVANTAGES ▪ One component, requires the addition of water only ▪ Reduced waste and risk of mixing failures ▪ Easy to mix, apply and finish ▪ Economical ▪ Excellent adhesion ▪ Shrinkage compensated ▪ Rapid strength development ▪ Compatible with the properties of typical concrete ▪ Vapour permeable     For more information https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf

Original price was: $17.84.Current price is: $16.84.Add to cart

SikaGrout®-212

General Purpose cementitious grout Chemical Base:- Cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. USES ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out CHARACTERISTICS / ADVANTAGES ▪ Easy to use (ready to mix powder) ▪Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪Blend of shrinkage-reducing and plasticizing/waterreducing agents ▪ Low heat build-up ▪Excellent for pumping: does not segregate, even at high flow. ▪No build-up on equipment hopper ▪ Superior freeze/thaw resistance ▪ Resistant to oil and water APPROVALS / STANDARDS ▪ Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout®-212 is USDA certifiable   Packaging 50 lb (22.7 kg) bag   For more information https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf

Original price was: $34.00.Current price is: $12.25.Add to cart

Home Category Products My account
1 $75.60
Select your currency
USD United States (US) dollar
1
  • Item added to cart
1
Your Cart
5+ shoppers have bought this
SikaTop Armatec -110 EpoCem
Price: $75.60
- +
$75.60
    Apply Coupon