SikaFloor -359 BH RAL 7040

Name: SikaFloor -359 BH RAL 7040 - Sika Building trust
Price: 298.49 USD
Availability: InStock

Original price was: $306.14.Current price is: $298.49.

5 in stock

Category: epoxy flooring

Description

2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT

Composition OF Polyurethane

DESCRIPTION

Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes.
Suitable for use in hot and tropical climatic conditions.

USES

Sikafloor®-359 BH may only be used by experienced professionals.

Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring

▪ Particularly suitable for car park decks, ramps and warehouses etc.

CHARACTERISTICS / ADVANTAGES

▪ Tough-elastic
▪ UV resistant
▪ Good mechanical and chemical resistance
▪ Watertight
▪ Non-yellowing
▪ Easy application
▪ Slip resistant surface possible
▪ Easy to clean and maintain

Packaging

Part A: 16.5 kg containers
Part B: 3.5 kg containers
Part A + B: 20.0 kg ready to mix units

Additional information

Weight	20 kg

Reviews

There are no reviews yet.

Be the first to review “SikaFloor -359 BH RAL 7040”

Related products

Sikadur®-31 CF Slow 1.2Kg

2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing CHARACTERISTICS / ADVANTAGES Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance Packaging Component A: Component B: A+B set 0.800Kg 0.400 kg 1.2 kg 4 kg 2 kg 6 kg 8 kg 4 kg 12 kg For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_

Original price was: $25.56.Current price is: $22.89.Add to cart

Sikadur®-32 Hi-Mod

HIGH-MODULUS, HIGH-STRENGTH, EPOXY BONDING/GROUTING ADHESIVE Chemical Base:- 100 % epoxy PRODUCT DESCRIPTION Sikadur®-32 Hi-Mod is a multi-purpose, 2-component, 100 % solids, moisture-tolerant structural epoxy adhesive. It conforms to the current ASTM C-881 Types I, II, and V, Grade 2, Class C and AASHTO M-235 specifications. USES Sikadur®-32 Hi-Mod may only be used by experienced professionals. Bond fresh, plastic concrete to hardened concrete and steel. ▪Grout horizontal cracks in structural concrete and wood by gravity feed. ▪ Machinery and ‘robotic’ base-plate grout. ▪Structural adhesive for concrete, masonry, metal, wood, etc CHARACTERISTICS / ADVANTAGES ▪ High-strength bonding/grouting adhesive. ▪ Tolerant to moisture before, during and after cure. ▪ Excellent adhesion to most structural materials. ▪ Convenient easy-to-mix ratio A:B = 1:1 by volume. ▪ Easy-to-use for bonding/grouting applications. ▪ Fast initial set; rapid gain to ultimate strengths. ▪ USDA-certified for use in food plants. For more information https://usa.sika.com/content/dam/dms/us01/7/pds-cpd-Sikadur32HiMod-us.pdf

Original price was: $97.17.Current price is: $93.17.Add to cart

SikaFloor -161

2-PART EPOXY PRIMER, LEVELLING MORTAR AND INTERMEDIATE LAYER USES AND CHARACTERISTICS / ADVANTAGES Sikafloor®-161 may only be used by experienced professionals. For priming concrete substrates, cement screeds and epoxy mortars ▪For low to medium absorbent substrates ▪ Primer for the Sikafloor®-263 SL, Sikafloor®-264 economic flooring systems and Sikalastic®-800 series ▪ Binder for levelling mortars and mortar screeds ▪Intermediate layer underneath Sikafloor®-263 SL and Sikafloor®-264 ▪ Low viscosity ▪ Excellent bond strength ▪ Short waiting times ▪ Multi-purpose Sikafloor®-161 is an economic, two part, low viscosityepoxy resin. Suitable for use in hot and tropical climatic conditions. ▪High quality epoxy primer for interior and exterior floors Primer composed of (A + B) ▪For preparing low and medium absorbent concrete substrates ▪A primer for economical flooring systems ▪Excellent bonding strength ▪Easy to apply with a roller multifunctional ▪It is used in concrete and natural stone Epoxy mortar ▪Self-leveling epoxy floor paint ▪Good penetration and adhesion ▪Primer for three compounds sikfloor 264, sikafloor 264 SG, and sikafloor 263 SL For more information https://gcc.sika.com/content/dam/dms/gcc/s/sikafloor_-161.pdf

Original price was: $207.64.Current price is: $199.66.Add to cart

Sikadur® PF

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance Packaging Part A: 4 kg container Part B: 2 kg container (A + B) 6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Original price was: $59.63.Current price is: $55.90.Add to cart