1
ر.س57.00
Original price was: ر.س70.00.ر.س60.00Current price is: ر.س60.00.
99 in stock
Related products
HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings CHARACTERISTICS / ADVANTAGES ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use Packaging 20, 40 kg bag For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf
Original price was: ر.س57.50.ر.س55.20Current price is: ر.س55.20.Add to cart
General Purpose cementitious grout Chemical Base:- Cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. USES ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out CHARACTERISTICS / ADVANTAGES ▪ Easy to use (ready to mix powder) ▪Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪Blend of shrinkage-reducing and plasticizing/waterreducing agents ▪ Low heat build-up ▪Excellent for pumping: does not segregate, even at high flow. ▪No build-up on equipment hopper ▪ Superior freeze/thaw resistance ▪ Resistant to oil and water APPROVALS / STANDARDS ▪ Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout®-212 is USDA certifiable Packaging 50 lb (22.7 kg) bag For more information https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf
Original price was: ر.س50.00.ر.س46.00Current price is: ر.س46.00.Add to cart
BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf
Original price was: ر.س287.00.ر.س284.00Current price is: ر.س284.00.Add to cart
FORMERLY KNOWN AS SIKAREP® HSF SA. MULTI-PURPOSE, HIGH STRENGTH, FIBRE-REINFORCED, PATCHING AND REPAIR MORTAR Composition:- Polymer containing cementitious mortar with different additives and synthetic fibres MORE DESCRIPTION Sika MonoTop®-615 HSF SA is a cementitious, synthetic fibre reinforced, silica fume and polymer containing, one-component repair mortar. Suitable for use in hot and tropical climatic conditions. USES Sika MonoTop®-615 HSF SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications. CHARACTERISTICS / ADVANTAGES ▪ Easy to mix, apply and finish ▪ Good adhesion ▪ Shrinkage compensated ▪ Compatible with the properties of typical concretes ▪ Low water absorption, but vapour permeable ▪ Non corrosive ▪ Excellent chloride and carbonation resistance ▪ Fibre reinforced ▪ High strength For more information https://gcc.sika.com/content/dam/dms/gcc/b/sika_monotop_-615hsfsa.pdf
Original price was: ر.س92.00.ر.س86.25Current price is: ر.س86.25.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
Reviews
There are no reviews yet.