Sale!

SikaFloor -264

Original price was: $216.96.Current price is: $207.64.

30 in stock

Category:

Description

2-PART HIGH PERFORMANCE , SOLVENT FREE , RESIN BASE EPOXY COATING

 

DESCRIPTION

Sikafloor®-264 is a two part coloured epoxy resin. “Total solid epoxy composition acc. to the test method
Deutsche Bauchemie e.V. (German Association for construction chemicals)”

USES

Sikafloor®-264 may only be used by experienced professionals.
Sikafloor®-264 is used as:
▪Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
▪ Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars
and for wet process areas, e.g. beverage and food industry

▪ Suitable to be used in different industrials such as Food & Beverage , Pharmaceuticals , Clean Rooms ,
Power Stations and Water plants .
▪ Mechanical rooms and Storage areas in adminstration buildings , exhibition halls and showrooms .

 

CHARACTERISTICS / ADVANTAGES

▪ Good chemical and mechanical resistance
▪ Easy application
▪ Liquid proof
▪ Gloss finish
▪ Slip resistant surface possible
▪ Dust Proof

 

Packaging

Ready for use pre-proportioned units at 15 kg (A+B).

 

For more information

https://industry.sika.com/content/dam/dms/eg01/1/sikafloor_-264.pdf

 

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “SikaFloor -264”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikafloor®-190 Screed

HEAVY DUTY EPOXY RESIN FLOOR SCREED Composition Epoxy resin and selected natural aggregates DESCRIPTION Sikafloor®-190 Screed is a three component solventfree mortar screed based on epoxy resins and specially graded aggregates. Suitable for use in hot and tropical and climatic conditions. USES Sikafloor®-190 Screed may only be used by experienced professionals. Sikafloor®-190 Screed is used as a non-slip and abrasion resistant epoxy resin flooring screed in applications such as: ▪ Flooring subject to moderate or heavy loading ▪ Workshop and factory floors ▪ Machine shops and warehouses ▪ Depots and loading ramps ▪ Hangars ▪ Car parks with higher anticipated load ▪ Stairs   CHARACTERISTICS / ADVANTAGES ▪ Easy and fast to apply ▪ Excellent adhesion to substrate ▪The screed may be mechanically smoothed using a plastic coated disk ▪ Non-slip, non-skid finish possible ▪ Excellent abrasion resistance ▪ High mechanical strength ▪ Permeable to water vapour ▪ Compatible with suitable Sikafloor® coatings   Packaging Component A                        2.41 kg unit Component B                        0.50 kg unit Component C                        25 kg bag

Original price was: $61.23.Current price is: $58.17.Add to cart

Sikadur® PF

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair   CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance   Packaging Part A:                   4 kg container Part B:                   2 kg container (A + B)                  6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Original price was: $59.63.Current price is: $55.90.Add to cart

Sikadur 507 Aggregate

Selected grades of quartz sand for special flooring application and a filler for the preparation of industrial coatings are added as a supporting compound to SIKAFLOOR products. Sikafloor® - 161 Sikafloor® - 264 Sikafloor® - 264 SG   product characreristics  0.3 – 0.7 mm                    Grading 1.5 kg/Lt                          Bulk Density 25 kg bag                         Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf للعودة الى قائمة  Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit

Original price was: $13.78.Current price is: $12.25.Add to cart

Sikadur 504 Aggregate

Selected grades of quartz sand for the application of special floors and a filler for the preparation of industrial coatings, to be added as a supporting compound for Sikafloor and Sikaguard products. Sikafloor® - 161 Sikafloor® - 263 product characreristics  0.08 – 0.20 mm                    Grading 1.5 kg/Lt                             Bulk Density 25 kg bag                            Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf To return to List   Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit

Original price was: $13.78.Current price is: $12.25.Add to cart

Home Category Products My account
0 $0.00
Select your currency
USD United States (US) dollar
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon