Sale!

Sikafloor®-100 Level SA

Original price was: ر.س70.00.Current price is: ر.س63.00.

40 in stock

Description

Sikafloor®-100 Level SA

POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM.

Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish.

 

  1. Suitable for use in hot and tropical climate conditions.
  2. Fast application because of the good flow and cohesion of the fresh product
  3. Easy to place by pump or manual application
  4. Low tension

Usage

Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc.

  • Levelling of both large and small surfaces
  • Typical uses are in commercial, residential and domestic properties etc.

 

Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic.

 

Advantages

  • Fast application because of the good flow and cohesion of the fresh product
  • Easy to place by pump or manual application
  • Low tension
  • Good bond and compaction
  • Fast hardening and quick drying

Packaging

25 kg bags

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “Sikafloor®-100 Level SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaGrout®-114 SA

CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT Composition :- Portland cement, selected fillers and aggregates, special additives   DESCRIPTION SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength. Suitable for use in hot and tropical climatic conditions USES SikaGrout®-114 SA is used for grouting in the following: ▪ Machine foundations ▪ Columns in pre-cast construction ▪ Concrete anchors, cavities, gaps and recesses ▪ Base plates ▪ General concrete repairs ▪ Bridge bearing pads CHARACTERISTICS / ADVANTAGES SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial properties: ▪ Easy to mix ▪ Good flow characteristics ▪ Adjustable consistency ▪ High final strengths ▪ Non-corrosive and iron-free APPROVALS / CERTIFICATES Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C Packaging 25 kg bag   For more information https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf

Original price was: ر.س34.00.Current price is: ر.س32.00.Add to cart

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun   For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: ر.س287.00.Current price is: ر.س284.00.Add to cart

Sika Antisol® WB

CURING COMPOUND, PRIMER, SEALER AND SURFACE HARDENER FOR FRESHLY LAID CONCRETE Composition:- Aqueous solution of acrylic copolymer dispersion   DESCRIPTION Sika® Antisol® WB is a ready to use, solvent free, water based liquid curing compound for preventing the evaporation of mixing water in concrete. It is ready for use and simple to apply. Suitable for use in hot and tropical climatic conditions. USES Sika® Antisol® WB can be applied on site and in precast plants. It has been specially developed for use as a high quality curing and sealing compound for interior or exterior applications. Sika® Antisol® WB is suitable for all kinds of concrete, horizontal and vertical applications and large areas of exposed concrete, such as: ▪ Highways ▪ Runways and taxiways ▪ Aprons and hard standings ▪ Roof decks ▪ Pre-stressed beams and piers ▪ Irrigation canals / channels CHARACTERISTICS / ADVANTAGES  Sika® Antisol® WB has the following characteristics: ▪Reduces incidence of plastic cracking ▪Forms stable film on the surface to provide excellent curing and sealing properties ▪ Ensure achievement of desired strengths, minimize shrinkage ▪ Alleviates other costly methods such as Hessian – watering ▪ Increases frost resistance ▪Reduces dusting. Seals, primes and hardnens cement based compositions ▪ Non-flammable, non-toxic and non-staining ▪Considerable reduction in loss of water from concrete ▪ Cured film acts as primer between concrete surface and coating material Packaging 20 L cans 200 L drums

Original price was: ر.س1,200.00.Current price is: ر.س1,160.00.Add to cart

Sika Primer -11 W+

LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES   DESCRIPTION Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions. USES Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades. A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor CHARACTERISTICS / ADVANTAGES  ▪ Very good weathering resistance ▪ Movement capability of ±50 % (ASTM C 719) ▪ Good adhesion to a wide range of substrates ▪ Neutral cure ▪ Low VOC content An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality. Protect the substrate from moisture entering from the tiles Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption Easy to apply, you can use brush, roller or wipe Walls of hospitals, offices and corners with gypsum board and cement board Heated floors (water and electricity systems) Packaging 300 ml cartridge, 12 cartridges per box 600 ml foil pack, 20 foil packs per box     For more information https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf

Original price was: ر.س230.00.Current price is: ر.س200.00.Add to cart

Home Category Products My account
1 ر.س57.00
Select your currency
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
SikaRep® Fine SA 25Kg
Price: ر.س57.00
- +
ر.س57.00
    Apply Coupon