Sale!

Sikadur® PF

Original price was: ر.س224.00.Current price is: ر.س210.00.

20 in stock

Category:

Description

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY

Composition:- Epoxy resin and special fillers

DESCRIPTION

Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers.
Suitable for use in hot and tropical conditions.

USES

Sikadur® PF may only be used by experienced professionals.
▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc.
▪ General smoothing / re-profiling over large areas
▪ Suitable for feather edge
▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product
range
▪ Filling of non structural cracks, holes and voids
▪ Corners and joints edges repair

 

CHARACTERISTICS / ADVANTAGES

Sikadur® PF has the following advantages:
▪ Easy to mix and apply
▪ High strength surface repair material
▪ Very good adhesion to most construction materials
▪ High strength adhesive

▪ Thixotropic: non-sag in vertical and overhead applications
▪ Non-shrink
▪ Different coloured components (for mixing control)
▪ No primer needed
▪ Excellent mechanical strength
▪ Impermeable to liquids and water vapour
▪ Good chemical resistance
▪ Suitable for dry and damp surfaces
▪Cost effective; consumption of subsequent coatings is reduced
▪ Excellent adhesion to concrete substrates
▪ Good abrasion and impact resistance

 

Packaging

Part A:                   4 kg container
Part B:                   2 kg container
(A + B)                  6 kg ready to mix units

For more information

https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Additional information

Weight 6 kg

Reviews

There are no reviews yet.

Be the first to review “Sikadur® PF”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sika AnchorFix®-2+ Tropical

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: ▪ Rebars / reinforcing steel ▪ Threaded rods ▪ Bolts and special fastening systems ▪ Concrete ▪ Solid masonry ▪ Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ▪ Hard natural stone ▪ Solid rock ▪Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES ▪ Fast curing ▪ Standard guns can be used ▪ Medium to high load capacity ▪ ETA Approval available ▪ Suitable for cracked concrete ▪ Drinking Water certified ▪ LEED Attestation available ▪ Non-sag, even overhead ▪ Styrene-free ▪ Low odour ▪ Low wastage APPROVALS / CERTIFICATES ▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. ▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking ▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge                                                        12 cartridges per box Pallet: 75 boxes   For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Original price was: ر.س86.00.Current price is: ر.س84.00.Add to cart

SikaFloor -359 BH RAL 7040

2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT Composition OF Polyurethane DESCRIPTION Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-359 BH may only be used by experienced professionals. Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring ▪ Particularly suitable for car park decks, ramps and warehouses etc.   CHARACTERISTICS / ADVANTAGES ▪ Tough-elastic ▪ UV resistant ▪ Good mechanical and chemical resistance ▪ Watertight ▪ Non-yellowing ▪ Easy application ▪ Slip resistant surface possible ▪ Easy to clean and maintain   Packaging Part A:                    16.5 kg containers Part B:                    3.5 kg containers Part A + B:              20.0 kg ready to mix units

Original price was: ر.س1,150.00.Current price is: ر.س1,121.25.Add to cart

Sikadur®-42 MP Slow 140Kg

3-PART, MULTI PURPOSE EPOXY GROUTING SYSTEM Composition:- Epoxy resin DESCRIPTION Sikadur®-42 MP Slow is a three-component, multipurpose, moisture tolerant, epoxy grouting system. Suitable for use in hot and tropical climatic conditions. USES Sikadur®-42 MP Slow may only be used by experienced professionals. High-strength grouting and fixing of: ▪ Starter bars ▪ Anchors ▪ Fasteners ▪ Tie rods ▪ Crash barrier posts ▪ Fence and railing posts ▪Under-grouting and bedding of: 1- Base plates 2- Machine bases, seat base-plates for light and heavy 3- Machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. ▪ Bridge bearings ▪ Mechanical joints (i.e. road/bridge/deck types etc.) ▪Sleeper-less, direct rail fixing: ▪ Crane tracks ▪ Light rail and permanent way in tunnels ▪ Light rail and permanent way over bridges CHARACTERISTICS / ADVANTAGES ▪ High early strength ▪ Ready-to-mix, pre-batched units ▪ Moisture tolerant ▪ Non-shrink ▪ Corrosion and chemically resistant ▪ Stress and impact resistant ▪ High compressive strength ▪ High vibration resistance ▪ Low coefficient of thermal expansion APPROVALS / CERTIFICATES ▪ Testing according to EN 1504-6.   For more information https://gcc.sika.com/content/dam/dms/gcc/f/sikadur_-42_mp_slow.pdf

Original price was: ر.س1,600.00.Current price is: ر.س1,480.00.Add to cart

SikaFloor -264

2-PART HIGH PERFORMANCE , SOLVENT FREE , RESIN BASE EPOXY COATING   DESCRIPTION Sikafloor®-264 is a two part coloured epoxy resin. "Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals)" USES Sikafloor®-264 may only be used by experienced professionals. Sikafloor®-264 is used as: ▪Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps. ▪ Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry ▪ Suitable to be used in different industrials such as Food & Beverage , Pharmaceuticals , Clean Rooms , Power Stations and Water plants . ▪ Mechanical rooms and Storage areas in adminstration buildings , exhibition halls and showrooms .   CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Liquid proof ▪ Gloss finish ▪ Slip resistant surface possible ▪ Dust Proof   Packaging Ready for use pre-proportioned units at 15 kg (A+B).   For more information https://industry.sika.com/content/dam/dms/eg01/1/sikafloor_-264.pdf  

Original price was: ر.س815.00.Current price is: ر.س780.00.Add to cart

Home Category Products My account
2 ر.س531.00
Select your currency
SAR Saudi riyal
2
  • Item added to cart
2
Your Cart
Sikalastic® WR
Price: ر.س485.00
- +
ر.س485.00
Sikadur 509 Aggregate
Price: ر.س46.00
- +
ر.س46.00
    Apply Coupon