Sale!

Sikadur® PF

Original price was: ر.س224.00.Current price is: ر.س210.00.

20 in stock

Category:

Description

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY

Composition:- Epoxy resin and special fillers

DESCRIPTION

Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers.
Suitable for use in hot and tropical conditions.

USES

Sikadur® PF may only be used by experienced professionals.
▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc.
▪ General smoothing / re-profiling over large areas
▪ Suitable for feather edge
▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product
range
▪ Filling of non structural cracks, holes and voids
▪ Corners and joints edges repair

 

CHARACTERISTICS / ADVANTAGES

Sikadur® PF has the following advantages:
▪ Easy to mix and apply
▪ High strength surface repair material
▪ Very good adhesion to most construction materials
▪ High strength adhesive

▪ Thixotropic: non-sag in vertical and overhead applications
▪ Non-shrink
▪ Different coloured components (for mixing control)
▪ No primer needed
▪ Excellent mechanical strength
▪ Impermeable to liquids and water vapour
▪ Good chemical resistance
▪ Suitable for dry and damp surfaces
▪Cost effective; consumption of subsequent coatings is reduced
▪ Excellent adhesion to concrete substrates
▪ Good abrasion and impact resistance

 

Packaging

Part A:                   4 kg container
Part B:                   2 kg container
(A + B)                  6 kg ready to mix units

For more information

https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Additional information

Weight 6 kg

Reviews

There are no reviews yet.

Be the first to review “Sikadur® PF”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaFloor -264

2-PART HIGH PERFORMANCE , SOLVENT FREE , RESIN BASE EPOXY COATING   DESCRIPTION Sikafloor®-264 is a two part coloured epoxy resin. "Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals)" USES Sikafloor®-264 may only be used by experienced professionals. Sikafloor®-264 is used as: ▪Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps. ▪ Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry ▪ Suitable to be used in different industrials such as Food & Beverage , Pharmaceuticals , Clean Rooms , Power Stations and Water plants . ▪ Mechanical rooms and Storage areas in adminstration buildings , exhibition halls and showrooms .   CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Liquid proof ▪ Gloss finish ▪ Slip resistant surface possible ▪ Dust Proof   Packaging Ready for use pre-proportioned units at 15 kg (A+B).   For more information https://industry.sika.com/content/dam/dms/eg01/1/sikafloor_-264.pdf  

Original price was: ر.س815.00.Current price is: ر.س780.00.Add to cart

Sika AnchorFix®-2+ Tropical

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: ▪ Rebars / reinforcing steel ▪ Threaded rods ▪ Bolts and special fastening systems ▪ Concrete ▪ Solid masonry ▪ Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ▪ Hard natural stone ▪ Solid rock ▪Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES ▪ Fast curing ▪ Standard guns can be used ▪ Medium to high load capacity ▪ ETA Approval available ▪ Suitable for cracked concrete ▪ Drinking Water certified ▪ LEED Attestation available ▪ Non-sag, even overhead ▪ Styrene-free ▪ Low odour ▪ Low wastage APPROVALS / CERTIFICATES ▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. ▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking ▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge                                                        12 cartridges per box Pallet: 75 boxes   For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Original price was: ر.س86.00.Current price is: ر.س84.00.Add to cart

SikaFloor -263 SL

SELF-SMOOTHING PIGMENTED EPOXY RESIN FOR FLOORING APPLICATION Epoxy material consisting of three compounds (sikadur 504 + B + A) at a rate of  (25:1:1) free of solvents to give self-leveling colored floors Sikafloor®-263 SL is a two part (filler supplied separately), self-smoothing, pigmented, epoxy resin for flooring application. Suitable for use in hot and tropical climatic conditions. Product use and characteristics The thickness ranges from 1.5 mm to 5.0 mm on industrial floors that are subject to relatively heavy loads. Food, drug and chemical factories Electricity and water stations Laboratories and rooms exposed to radiation Exhibitions, presentation rooms, training and assembly halls Hard surfaces such as concrete and mortar Maintenance workshops Warehouses Garages and car parks hangars production areas Water and liquid insulator High compressive strength Solvent-free and non-flammable Economical and easy to apply, clean and maintain Highly fillable Good chemical and mechanical resistance Easy application Liquid proof Gloss finish Slip resistant surface possible   Sikafloor®-263 SL is used as self-smoothing system for concrete and cement screeds with medium to heavy wear, e.g. for: ▪ Storage warehouses ▪ Assembly halls ▪ Maintenance workshops ▪ Garages and car parks ▪ Loading bays ▪ Aircraft hangars ▪ Plant rooms ▪ Clean rooms ▪ Production areas ▪ Dry food processing plants ▪ Pharmaceutical manufacturing   For more information https://gcc.sika.com/content/dam/dms/gcc/x/sikafloor_-263_sl.pdf

Original price was: ر.س815.00.Current price is: ر.س780.00.Add to cart

Sikadur 507 Aggregate

Selected grades of quartz sand for special flooring application and a filler for the preparation of industrial coatings are added as a supporting compound to SIKAFLOOR products. Sikafloor® - 161 Sikafloor® - 264 Sikafloor® - 264 SG   product characreristics  0.3 – 0.7 mm                    Grading 1.5 kg/Lt                          Bulk Density 25 kg bag                         Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf للعودة الى قائمة  Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit

Original price was: ر.س51.75.Current price is: ر.س46.00.Add to cart

Home Category Products My account
3 ر.س3,086.25
Select your currency
SAR Saudi riyal
3
  • Item added to cart
3
Your Cart
Sikalastic® WR
Price: ر.س485.00
- +
ر.س485.00
Sikadur®-42 MP Slow 140Kg
Price: ر.س1,480.00
- +
ر.س1,480.00
SikaFloor -359 BH RAL 7040
Price: ر.س1,121.25
- +
ر.س1,121.25
    Apply Coupon