Sale!

Sika Primer -11 W+

Original price was: $61.23.Current price is: $53.24.

15 in stock

Description

LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES

 

DESCRIPTION

Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions.

USES

Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades.

A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor

CHARACTERISTICS / ADVANTAGES 

▪ Very good weathering resistance
▪ Movement capability of ±50 % (ASTM C 719)
▪ Good adhesion to a wide range of substrates
▪ Neutral cure
▪ Low VOC content

An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality.

  • Protect the substrate from moisture entering from the tiles
  • Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption
  • Easy to apply, you can use brush, roller or wipe
  • Walls of hospitals, offices and corners with gypsum board and cement board
  • Heated floors (water and electricity systems)

Packaging

300 ml cartridge, 12 cartridges per box

600 ml foil pack, 20 foil packs per box

 

 

For more information

https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf

Additional information

Weight 20 kg

Reviews

There are no reviews yet.

Be the first to review “Sika Primer -11 W+”

Your email address will not be published. Required fields are marked *

You may also like…

Related products

Related products

SikaGrout®-114 SA

CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT Composition :- Portland cement, selected fillers and aggregates, special additives   DESCRIPTION SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength. Suitable for use in hot and tropical climatic conditions USES SikaGrout®-114 SA is used for grouting in the following: ▪ Machine foundations ▪ Columns in pre-cast construction ▪ Concrete anchors, cavities, gaps and recesses ▪ Base plates ▪ General concrete repairs ▪ Bridge bearing pads CHARACTERISTICS / ADVANTAGES SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial properties: ▪ Easy to mix ▪ Good flow characteristics ▪ Adjustable consistency ▪ High final strengths ▪ Non-corrosive and iron-free APPROVALS / CERTIFICATES Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C Packaging 25 kg bag   For more information https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf

Original price was: $9.05.Current price is: $8.52.Add to cart

SikaRep® SA

MULTI-PURPOSE, ECONOMICAL, PATCHING AND REPAIR MORTAR Composition:- Polymer containing cementitious mortar with different additives DESCRIPTION SikaRep® SA is a cementitious, silica fume and polymer containing, one-component repair mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications. CHARACTERISTICS / ADVANTAGES ▪ Easy to mix, apply and finish ▪ Good adhesion ▪ Shrinkage compensated ▪ Compatible with the properties of typical concretes ▪ Low water absorption, but vapour permeable ▪ Non-corrosive ▪ Excellent chloride and carbonation resistance    

Original price was: $16.84.Current price is: $14.91.Add to cart

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun   For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: $76.40.Current price is: $75.60.Add to cart

SikaLatex 200 Liter

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE Composition:- Styrene butadiene emulsion DESCRIPTION  SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Suitable for use in hot and tropical climatic conditions. Sika latex is added to (Portland cement + quartz sand + water). USES SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications: ▪ Grouts and screeds ▪ Patch repair mortars ▪ Mansonry mortars ▪ Renders ▪ Tile adhesives CHARACTERISTICS / ADVANTAGES The main advantages of SikaLatex® are: ▪ Increased adhesion ▪ Reduced shrinkage and cracking ▪ Increased abrasion resistance ▪ Reduced permeability ▪ Improved workability ▪ User friendly ▪ Suitable on most common construction substrates SUSTAINABILITY SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Original price was: $598.97.Current price is: $581.67.Add to cart

Home Category Products My account
0 $0.00
Select your currency
USD United States (US) dollar
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon