Main Menu

0 Wishlist
1 ر.س63.00
Sale!

SikaTop Armatec -110 EpoCem

Original price was: ر.س287.00.Current price is: ر.س284.00.

5 in stock

Category:

Description

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION

Composition:- Portland cement, epoxy resin, selected aggregates and additives

DESCRIPTION

▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection.
▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7.
▪Suitable for use in hot and tropical climatic conditions.

USES

Suitable for control of anodic areas (Principle 11,
method 11.1 EN 1504-9)
▪ Suitable in concrete repair as corrosion protection for
reinforcement.
▪ Suitable as a bonding primer on concrete and mortar

CHARACTERISTICS / ADVANTAGES

▪Contains EpoCem® technology – improved bonding agent
▪ Extended open times for repair mortars
▪ Compatible with most Sika® repair mortars
▪ Excellent adhesion to concrete and steel
▪ Contains corrosion inhibitor
▪Certified for application under dynamic load conditions
▪ Good resistance to water and chloride penetration
▪ High shear strength
▪ Long pot life
▪ Easy to mix
▪ Can be brushed on or applied using spray gun

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Additional information

Weight 20 kg

Reviews

There are no reviews yet.

Be the first to review “SikaTop Armatec -110 EpoCem”

Your email address will not be published. Required fields are marked *

You may also like…

Related products

Related products

Sikacrete®-114 SA

FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR Composition:-  Portland cement, selected fillers and aggregates, special additives. DESCRIPTION Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete. Suitable for use in hot and tropical climatic conditions. USES Sikacrete®-114 SA is used for the structural repair of deteriorated concrete. ▪ Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. ▪ A typical application is the re-profiling of damaged concrete members, using formwork. ▪ Suitable for base plate grouting where thickness exceeds 100 millimetre. ▪ Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump   CHARACTERISTICS / ADVANTAGES ▪ One component, requires the addition of water only ▪ Reduced waste and risk of mixing failures ▪ Easy to mix, apply and finish ▪ Economical ▪ Excellent adhesion ▪ Shrinkage compensated ▪ Rapid strength development ▪ Compatible with the properties of typical concrete ▪ Vapour permeable     For more information https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf

Original price was: ر.س67.00.Current price is: ر.س63.25.Add to cart

Sikacrete® 112

Free flowing micro-concrete for grouting and repair Mixture of Portland Cement and graded aggregates Product Description Sikacrete® 112 one component, free-flowing, high strength, cement based microconcrete with a maximum aggregate size of 5 mm. Suitable for use in tropical and hot climatic conditions.   Uses  Sikacrete® 112 used for the structural repair of deteriorated concrete.  It is ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications.  A typical application is the re-profiling of damaged concrete members, using formwork.  Also suitable for base plate grouting where thickness exceeds 75 mm.   Characteristics / Advantages  One component, requires the addition of water only  Reduced waste and risk of mixing failures  Easy to mix, apply and finish  Economical Excellent adhesion Shrinkage compensated Rapid strength development  Compatible with the properties of typical concrete  Vapour permeable High resistance to freeze/thaw cycling

Original price was: ر.س50.00.Current price is: ر.س46.00.Read more

Sika Primer -11 W+

LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES   DESCRIPTION Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions. USES Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades. A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor CHARACTERISTICS / ADVANTAGES  ▪ Very good weathering resistance ▪ Movement capability of ±50 % (ASTM C 719) ▪ Good adhesion to a wide range of substrates ▪ Neutral cure ▪ Low VOC content An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality. Protect the substrate from moisture entering from the tiles Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption Easy to apply, you can use brush, roller or wipe Walls of hospitals, offices and corners with gypsum board and cement board Heated floors (water and electricity systems) Packaging 300 ml cartridge, 12 cartridges per box 600 ml foil pack, 20 foil packs per box     For more information https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf

Original price was: ر.س230.00.Current price is: ر.س200.00.Add to cart

SikaLatex 5 Liter

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE Composition:- Styrene butadiene emulsion DESCRIPTION  SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Suitable for use in hot and tropical climatic conditions. Sika latex is added to (Portland cement + quartz sand + water). USES SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications: ▪ Grouts and screeds ▪ Patch repair mortars ▪ Mansonry mortars ▪ Renders ▪ Tile adhesives CHARACTERISTICS / ADVANTAGES The main advantages of SikaLatex® are: ▪ Increased adhesion ▪ Reduced shrinkage and cracking ▪ Increased abrasion resistance ▪ Reduced permeability ▪ Improved workability ▪ User friendly ▪ Suitable on most common construction substrates SUSTAINABILITY SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Original price was: ر.س97.75.Current price is: ر.س86.25.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
1 ر.س63.00
Select your currency
USD United States (US) dollar
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
Sikafloor®-100 Level SA
Price: ر.س63.00
- +
ر.س63.00
Have a Promo Code?
Subtotal ر.س63.00
Continue Shoppingمعاينة السلهانهاء الطلب
    Apply Coupon