Main Menu

0 Wishlist
1 $16.84
Sale!

SikaTop Armatec -110 EpoCem

Original price was: $76.40.Current price is: $75.60.

5 in stock

Category:

Description

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION

Composition:- Portland cement, epoxy resin, selected aggregates and additives

DESCRIPTION

▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection.
▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7.
▪Suitable for use in hot and tropical climatic conditions.

USES

Suitable for control of anodic areas (Principle 11,
method 11.1 EN 1504-9)
▪ Suitable in concrete repair as corrosion protection for
reinforcement.
▪ Suitable as a bonding primer on concrete and mortar

CHARACTERISTICS / ADVANTAGES

▪Contains EpoCem® technology – improved bonding agent
▪ Extended open times for repair mortars
▪ Compatible with most Sika® repair mortars
▪ Excellent adhesion to concrete and steel
▪ Contains corrosion inhibitor
▪Certified for application under dynamic load conditions
▪ Good resistance to water and chloride penetration
▪ High shear strength
▪ Long pot life
▪ Easy to mix
▪ Can be brushed on or applied using spray gun

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Additional information

Weight 20 kg

Reviews

There are no reviews yet.

Be the first to review “SikaTop Armatec -110 EpoCem”

Your email address will not be published. Required fields are marked *

You may also like…

Related products

Related products

Sika MonoTop®-615 HSF SA

FORMERLY KNOWN AS SIKAREP® HSF SA. MULTI-PURPOSE, HIGH STRENGTH, FIBRE-REINFORCED, PATCHING AND REPAIR MORTAR Composition:- Polymer containing cementitious mortar with different additives and synthetic fibres MORE DESCRIPTION  Sika MonoTop®-615 HSF SA is a cementitious, synthetic fibre reinforced, silica fume and polymer containing, one-component repair mortar. Suitable for use in hot and tropical climatic conditions. USES Sika MonoTop®-615 HSF SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications. CHARACTERISTICS / ADVANTAGES ▪ Easy to mix, apply and finish ▪ Good adhesion ▪ Shrinkage compensated ▪ Compatible with the properties of typical concretes ▪ Low water absorption, but vapour permeable ▪ Non corrosive ▪ Excellent chloride and carbonation resistance ▪ Fibre reinforced ▪ High strength   For more information https://gcc.sika.com/content/dam/dms/gcc/b/sika_monotop_-615hsfsa.pdf

Original price was: $24.49.Current price is: $22.96.Add to cart

SikaGrout®-214 SA

CEMENTITOUS, HIGH EARLY STRENGTH, NON-SHRINK PRECISION GROUT Composition:-  Portland cement, selected fillers and aggregates, special additives   MORE DESCRIPTION SikaGrout®-214 SA is a cementitious, free flowing, economical, non-shrink precision grout with high early and ultimate strength. Suitable for use in hot and tropical climatic conditions. USES SikaGrout®-214 SA precision grout is used for grouting in the following: ▪ Machine Foundations ▪ Columns in pre-cast construction ▪ Base plates ▪ Concrete anchors, cavities, gaps and recesses ▪ General concrete repairs ▪ Joint nosing ▪ Structural concrete repairs ▪ Bridge bearings   CHARACTERISTICS / ADVANTAGES SikaGrout®-214 SA is an easy to use grout requiring only the addition of water. It offers the following beneficial properties: ▪ Easy to mix ▪ High early strength ▪ Good flow characteristics ▪ Non-shrink ▪ Adjustable consistency ▪ High final strengths ▪ Non-corrosive and iron-free APPROVALS / CERTIFICATES  Complies with CRD-C621-83-10.2 and ASTM C1107 as Type C Packaging 25 kg bag   For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikagrout_-214_sa.pdf

Original price was: $13.31.Current price is: $12.25.Add to cart

Sikacrete®-114 SA

FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR Composition:-  Portland cement, selected fillers and aggregates, special additives. DESCRIPTION Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete. Suitable for use in hot and tropical climatic conditions. USES Sikacrete®-114 SA is used for the structural repair of deteriorated concrete. ▪ Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. ▪ A typical application is the re-profiling of damaged concrete members, using formwork. ▪ Suitable for base plate grouting where thickness exceeds 100 millimetre. ▪ Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump   CHARACTERISTICS / ADVANTAGES ▪ One component, requires the addition of water only ▪ Reduced waste and risk of mixing failures ▪ Easy to mix, apply and finish ▪ Economical ▪ Excellent adhesion ▪ Shrinkage compensated ▪ Rapid strength development ▪ Compatible with the properties of typical concrete ▪ Vapour permeable     For more information https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf

Original price was: $17.84.Current price is: $16.84.Add to cart

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings   CHARACTERISTICS / ADVANTAGES  ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use   Packaging 20, 40 kg bag   For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: $15.31.Current price is: $14.69.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
1 $16.84
Select your currency
USD United States (US) dollar
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
Sikacrete®-114 SA
Price: $16.84
- +
$16.84
Have a Promo Code?
Subtotal $16.84
Continue Shoppingمعاينة السلهانهاء الطلب
    Apply Coupon