Sale!

Sika MonoTop®-615 HSF SA

Original price was: ر.س92.00.Current price is: ر.س86.25.

(العربية) مادة معالجة التعشيش

25 in stock

Description

FORMERLY KNOWN AS SIKAREP® HSF SA.
MULTI-PURPOSE, HIGH STRENGTH, FIBRE-REINFORCED, PATCHING AND REPAIR MORTAR

Composition:- Polymer containing cementitious mortar with different additives and synthetic fibres

MORE DESCRIPTION 

Sika MonoTop®-615 HSF SA is a cementitious, synthetic fibre reinforced, silica fume and polymer containing,
one-component repair mortar.
Suitable for use in hot and tropical climatic conditions.

USES

Sika MonoTop®-615 HSF SA can be used for cosmetic
or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications.

CHARACTERISTICS / ADVANTAGES

▪ Easy to mix, apply and finish
▪ Good adhesion
▪ Shrinkage compensated
▪ Compatible with the properties of typical concretes
▪ Low water absorption, but vapour permeable
▪ Non corrosive
▪ Excellent chloride and carbonation resistance
▪ Fibre reinforced
▪ High strength

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/b/sika_monotop_-615hsfsa.pdf

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “Sika MonoTop®-615 HSF SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikacrete®-114 SA

FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR Composition:-  Portland cement, selected fillers and aggregates, special additives. DESCRIPTION Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete. Suitable for use in hot and tropical climatic conditions. USES Sikacrete®-114 SA is used for the structural repair of deteriorated concrete. ▪ Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. ▪ A typical application is the re-profiling of damaged concrete members, using formwork. ▪ Suitable for base plate grouting where thickness exceeds 100 millimetre. ▪ Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump   CHARACTERISTICS / ADVANTAGES ▪ One component, requires the addition of water only ▪ Reduced waste and risk of mixing failures ▪ Easy to mix, apply and finish ▪ Economical ▪ Excellent adhesion ▪ Shrinkage compensated ▪ Rapid strength development ▪ Compatible with the properties of typical concrete ▪ Vapour permeable     For more information https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf

Original price was: ر.س67.00.Current price is: ر.س63.25.Add to cart

SikaRep® Fine SA 25Kg

ONE COMPONENT, ECONOMICAL, POLYMER MODIFIED, PORE SEALER / FINISHING MORTAR Composition:- Polymer containing cementitious mortar with different additives. DESCRIPTION SikaRep® Fine SA is a cementitious, silica fume containing, polymer modified one component pore sealer and finishing mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® Fine SA can be used as a: ▪Pore sealer / finishing mortar on cementitious substrates. ▪Thin layer rendering on horizontal and vertical areas in building and civil engineering construction, for external and internal finishing etc. ▪Levelling mortar on uneven substrates, and profiled concrete surfaces. ▪ Repair mortar to fill honeycombing pores etc. ▪Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings. CHARACTERISTICS / ADVANTAGES ▪ Easy to use ▪ Excellent workability ▪ Good mechanical strengths ▪ Can be applied by the wet-spray method ▪ Non-corrosive ▪ Adjustable consistency ▪ Economical Soft, smooth, ready-to-use repair mortar for concrete containing steam, silica and organic matter Used for filling and nesting gaps between 1 - 10 mm Polymer-modified cementitious sealant to be mixed with water, grouting mechanics, 7.5 liters per 25 kilos Closing pores and leveling different surfaces Restoration of capillary cracks and micro voids End repair works, joint joints and equal bends in concrete surfaces Homogeneous texture and resistance to mechanical stresses Can be sprayed with a vacuum gun Friendly, non-toxic and non-toxic economic Indoor and outdoor installation Vertical and horizontal

Original price was: ر.س63.00.Current price is: ر.س57.00.Add to cart

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun   For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: ر.س287.00.Current price is: ر.س284.00.Add to cart

Sikafloor®-100 Level SA

Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish.   Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc.   Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic.   Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags

Original price was: ر.س70.00.Current price is: ر.س63.00.Add to cart

Home Category Products My account
6 ر.س420.25
Select your currency
SAR Saudi riyal
6
  • Item added to cart
6
Your Cart
Sikacrete®-114 SA
Price: ر.س63.25
- +
ر.س63.25
Sikaflex® Construction+
Price: ر.س27.00
- +
ر.س27.00
SikaSil Universal
Price: ر.س14.00
- +
ر.س28.00
SikaRep® SA
Price: ر.س56.00
- +
ر.س56.00
Sika Primer -11 W+
Price: ر.س200.00
- +
ر.س200.00
SikaGrout®-214 SA
Price: ر.س46.00
- +
ر.س46.00
    Apply Coupon