Main Menu

0 Wishlist
1 ر.س284.00
Sale!

SikaGrout®-214 SA

Original price was: ر.س50.00.Current price is: ر.س46.00.

200 in stock

Category:

Description

CEMENTITOUS, HIGH EARLY STRENGTH, NON-SHRINK PRECISION GROUT

Composition:-  Portland cement, selected fillers and aggregates, special additives

 

MORE DESCRIPTION

SikaGrout®-214 SA is a cementitious, free flowing, economical, non-shrink precision grout with high early and ultimate strength.
Suitable for use in hot and tropical climatic conditions.

USES

SikaGrout®-214 SA precision grout is used for grouting in the following:
▪ Machine Foundations
▪ Columns in pre-cast construction
▪ Base plates
▪ Concrete anchors, cavities, gaps and recesses
▪ General concrete repairs
▪ Joint nosing
▪ Structural concrete repairs
▪ Bridge bearings

 

CHARACTERISTICS / ADVANTAGES

SikaGrout®-214 SA is an easy to use grout requiring only the addition of water. It offers the following beneficial properties:
▪ Easy to mix
▪ High early strength
▪ Good flow characteristics
▪ Non-shrink
▪ Adjustable consistency
▪ High final strengths
▪ Non-corrosive and iron-free

APPROVALS / CERTIFICATES 

Complies with CRD-C621-83-10.2 and ASTM C1107 as Type C

Packaging

25 kg bag

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/g/sikagrout_-214_sa.pdf

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “SikaGrout®-214 SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaGrout®-212

General Purpose cementitious grout Chemical Base:- Cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. USES ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out CHARACTERISTICS / ADVANTAGES ▪ Easy to use (ready to mix powder) ▪Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪Blend of shrinkage-reducing and plasticizing/waterreducing agents ▪ Low heat build-up ▪Excellent for pumping: does not segregate, even at high flow. ▪No build-up on equipment hopper ▪ Superior freeze/thaw resistance ▪ Resistant to oil and water APPROVALS / STANDARDS ▪ Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout®-212 is USDA certifiable   Packaging 50 lb (22.7 kg) bag   For more information https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf

Original price was: ر.س50.00.Current price is: ر.س46.00.Read more

Sikacrete®-114 SA

FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR Composition:-  Portland cement, selected fillers and aggregates, special additives. DESCRIPTION Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete. Suitable for use in hot and tropical climatic conditions. USES Sikacrete®-114 SA is used for the structural repair of deteriorated concrete. ▪ Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. ▪ A typical application is the re-profiling of damaged concrete members, using formwork. ▪ Suitable for base plate grouting where thickness exceeds 100 millimetre. ▪ Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump   CHARACTERISTICS / ADVANTAGES ▪ One component, requires the addition of water only ▪ Reduced waste and risk of mixing failures ▪ Easy to mix, apply and finish ▪ Economical ▪ Excellent adhesion ▪ Shrinkage compensated ▪ Rapid strength development ▪ Compatible with the properties of typical concrete ▪ Vapour permeable     For more information https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf

Original price was: ر.س67.00.Current price is: ر.س63.25.Add to cart

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings   CHARACTERISTICS / ADVANTAGES  ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use   Packaging 20, 40 kg bag   For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: ر.س57.50.Current price is: ر.س55.20.Add to cart

Sikafloor®-100 Level SA

Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish.   Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc.   Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic.   Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags

Original price was: ر.س70.00.Current price is: ر.س63.00.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
1 ر.س284.00
Select your currency
USD United States (US) dollar
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
5+ shoppers have bought this
SikaTop Armatec -110 EpoCem
Price: ر.س284.00
- +
ر.س284.00
Have a Promo Code?
Subtotal ر.س284.00
Continue Shoppingمعاينة السلهانهاء الطلب
    Apply Coupon