Main Menu

0 Wishlist
0 ر.س0.00
Sale!

SikaGrout®-114 SA

Original price was: ر.س34.00.Current price is: ر.س32.00.

800 in stock

Category:

Description

CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT

Composition :- Portland cement, selected fillers and aggregates, special additives

 

DESCRIPTION

SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength.
Suitable for use in hot and tropical climatic conditions

USES

SikaGrout®-114 SA is used for grouting in the following:
▪ Machine foundations
▪ Columns in pre-cast construction
▪ Concrete anchors, cavities, gaps and recesses
▪ Base plates
▪ General concrete repairs
▪ Bridge bearing pads

CHARACTERISTICS / ADVANTAGES

SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial
properties:
▪ Easy to mix
▪ Good flow characteristics
▪ Adjustable consistency
▪ High final strengths
▪ Non-corrosive and iron-free

APPROVALS / CERTIFICATES

Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C

Packaging

25 kg bag

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “SikaGrout®-114 SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings   CHARACTERISTICS / ADVANTAGES  ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use   Packaging 20, 40 kg bag   For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: ر.س57.50.Current price is: ر.س55.20.Add to cart

Sikafloor®-100 Level SA

Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish.   Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc.   Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic.   Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags

Original price was: ر.س70.00.Current price is: ر.س63.00.Add to cart

Sika Primer -11 W+

LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES   DESCRIPTION Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions. USES Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades. A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor CHARACTERISTICS / ADVANTAGES  ▪ Very good weathering resistance ▪ Movement capability of ±50 % (ASTM C 719) ▪ Good adhesion to a wide range of substrates ▪ Neutral cure ▪ Low VOC content An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality. Protect the substrate from moisture entering from the tiles Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption Easy to apply, you can use brush, roller or wipe Walls of hospitals, offices and corners with gypsum board and cement board Heated floors (water and electricity systems) Packaging 300 ml cartridge, 12 cartridges per box 600 ml foil pack, 20 foil packs per box     For more information https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf

Original price was: ر.س230.00.Current price is: ر.س200.00.Add to cart

SikaLatex 200 Liter

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE Composition:- Styrene butadiene emulsion DESCRIPTION  SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Suitable for use in hot and tropical climatic conditions. Sika latex is added to (Portland cement + quartz sand + water). USES SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications: ▪ Grouts and screeds ▪ Patch repair mortars ▪ Mansonry mortars ▪ Renders ▪ Tile adhesives CHARACTERISTICS / ADVANTAGES The main advantages of SikaLatex® are: ▪ Increased adhesion ▪ Reduced shrinkage and cracking ▪ Increased abrasion resistance ▪ Reduced permeability ▪ Improved workability ▪ User friendly ▪ Suitable on most common construction substrates SUSTAINABILITY SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Original price was: ر.س2,250.00.Current price is: ر.س2,185.00.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
0 ر.س0.00
Select your currency
USD United States (US) dollar
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping
      Apply Coupon