Main Menu

0 Wishlist
1 $581.67
Sale!

SikaGrout®-114 SA

Original price was: $9.05.Current price is: $8.52.

800 in stock

Category:

Description

CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT

Composition :- Portland cement, selected fillers and aggregates, special additives

 

DESCRIPTION

SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength.
Suitable for use in hot and tropical climatic conditions

USES

SikaGrout®-114 SA is used for grouting in the following:
▪ Machine foundations
▪ Columns in pre-cast construction
▪ Concrete anchors, cavities, gaps and recesses
▪ Base plates
▪ General concrete repairs
▪ Bridge bearing pads

CHARACTERISTICS / ADVANTAGES

SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial
properties:
▪ Easy to mix
▪ Good flow characteristics
▪ Adjustable consistency
▪ High final strengths
▪ Non-corrosive and iron-free

APPROVALS / CERTIFICATES

Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C

Packaging

25 kg bag

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “SikaGrout®-114 SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikacrete® 112

Free flowing micro-concrete for grouting and repair Mixture of Portland Cement and graded aggregates Product Description Sikacrete® 112 one component, free-flowing, high strength, cement based microconcrete with a maximum aggregate size of 5 mm. Suitable for use in tropical and hot climatic conditions.   Uses  Sikacrete® 112 used for the structural repair of deteriorated concrete.  It is ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications.  A typical application is the re-profiling of damaged concrete members, using formwork.  Also suitable for base plate grouting where thickness exceeds 75 mm.   Characteristics / Advantages  One component, requires the addition of water only  Reduced waste and risk of mixing failures  Easy to mix, apply and finish  Economical Excellent adhesion Shrinkage compensated Rapid strength development  Compatible with the properties of typical concrete  Vapour permeable High resistance to freeze/thaw cycling

Original price was: $13.31.Current price is: $12.25.Read more

Sikafloor®-100 Level SA

Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish.   Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc.   Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic.   Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags

Original price was: $18.63.Current price is: $16.77.Add to cart

Sika Antisol® WB

CURING COMPOUND, PRIMER, SEALER AND SURFACE HARDENER FOR FRESHLY LAID CONCRETE Composition:- Aqueous solution of acrylic copolymer dispersion   DESCRIPTION Sika® Antisol® WB is a ready to use, solvent free, water based liquid curing compound for preventing the evaporation of mixing water in concrete. It is ready for use and simple to apply. Suitable for use in hot and tropical climatic conditions. USES Sika® Antisol® WB can be applied on site and in precast plants. It has been specially developed for use as a high quality curing and sealing compound for interior or exterior applications. Sika® Antisol® WB is suitable for all kinds of concrete, horizontal and vertical applications and large areas of exposed concrete, such as: ▪ Highways ▪ Runways and taxiways ▪ Aprons and hard standings ▪ Roof decks ▪ Pre-stressed beams and piers ▪ Irrigation canals / channels CHARACTERISTICS / ADVANTAGES  Sika® Antisol® WB has the following characteristics: ▪Reduces incidence of plastic cracking ▪Forms stable film on the surface to provide excellent curing and sealing properties ▪ Ensure achievement of desired strengths, minimize shrinkage ▪ Alleviates other costly methods such as Hessian – watering ▪ Increases frost resistance ▪Reduces dusting. Seals, primes and hardnens cement based compositions ▪ Non-flammable, non-toxic and non-staining ▪Considerable reduction in loss of water from concrete ▪ Cured film acts as primer between concrete surface and coating material Packaging 20 L cans 200 L drums

Original price was: $319.45.Current price is: $308.80.Add to cart

SikaLatex 200 Liter

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE Composition:- Styrene butadiene emulsion DESCRIPTION  SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Suitable for use in hot and tropical climatic conditions. Sika latex is added to (Portland cement + quartz sand + water). USES SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications: ▪ Grouts and screeds ▪ Patch repair mortars ▪ Mansonry mortars ▪ Renders ▪ Tile adhesives CHARACTERISTICS / ADVANTAGES The main advantages of SikaLatex® are: ▪ Increased adhesion ▪ Reduced shrinkage and cracking ▪ Increased abrasion resistance ▪ Reduced permeability ▪ Improved workability ▪ User friendly ▪ Suitable on most common construction substrates SUSTAINABILITY SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Original price was: $598.97.Current price is: $581.67.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
1 $581.67
Select your currency
USD United States (US) dollar
SAR Saudi riyal
1
  • Item added to cart
1
Your Cart
SikaLatex 200 Liter
Price: $581.67
- +
$581.67
Have a Promo Code?
Subtotal $581.67
Continue Shoppingمعاينة السلهانهاء الطلب
    Apply Coupon