10
$526.77
Original price was: $199.66.$183.68Current price is: $183.68.
100 in stock
Related products
2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing CHARACTERISTICS / ADVANTAGES Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance Packaging Component A: Component B: A+B set 4 kg 2 kg 6 kg 8 kg 4 kg 12 kg For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_-31_cf_slow.pdf
Original price was: $59.63.$55.90Current price is: $55.90.Add to cart
2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing CHARACTERISTICS / ADVANTAGES Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance Packaging Component A: Component B: A+B set 0.800Kg 0.400 kg 1.2 kg 4 kg 2 kg 6 kg 8 kg 4 kg 12 kg For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_
Original price was: $25.56.$22.89Current price is: $22.89.Add to cart
3-PART, MULTI PURPOSE EPOXY GROUTING SYSTEM Composition:- Epoxy resin DESCRIPTION Sikadur®-42 MP Slow is a three-component, multipurpose, moisture tolerant, epoxy grouting system. Suitable for use in hot and tropical climatic conditions. USES Sikadur®-42 MP Slow may only be used by experienced professionals. High-strength grouting and fixing of: ▪ Starter bars ▪ Anchors ▪ Fasteners ▪ Tie rods ▪ Crash barrier posts ▪ Fence and railing posts ▪Under-grouting and bedding of: 1- Base plates 2- Machine bases, seat base-plates for light and heavy 3- Machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. ▪ Bridge bearings ▪ Mechanical joints (i.e. road/bridge/deck types etc.) ▪Sleeper-less, direct rail fixing: ▪ Crane tracks ▪ Light rail and permanent way in tunnels ▪ Light rail and permanent way over bridges CHARACTERISTICS / ADVANTAGES ▪ High early strength ▪ Ready-to-mix, pre-batched units ▪ Moisture tolerant ▪ Non-shrink ▪ Corrosion and chemically resistant ▪ Stress and impact resistant ▪ High compressive strength ▪ High vibration resistance ▪ Low coefficient of thermal expansion APPROVALS / CERTIFICATES ▪ Testing according to EN 1504-6. For more information https://gcc.sika.com/content/dam/dms/gcc/f/sikadur_-42_mp_slow.pdf
Original price was: $425.94.$393.99Current price is: $393.99.Add to cart
HIGH-MODULUS, HIGH-STRENGTH, EPOXY BONDING/GROUTING ADHESIVE Chemical Base:- 100 % epoxy PRODUCT DESCRIPTION Sikadur®-32 Hi-Mod is a multi-purpose, 2-component, 100 % solids, moisture-tolerant structural epoxy adhesive. It conforms to the current ASTM C-881 Types I, II, and V, Grade 2, Class C and AASHTO M-235 specifications. USES Sikadur®-32 Hi-Mod may only be used by experienced professionals. Bond fresh, plastic concrete to hardened concrete and steel. ▪Grout horizontal cracks in structural concrete and wood by gravity feed. ▪ Machinery and ‘robotic’ base-plate grout. ▪Structural adhesive for concrete, masonry, metal, wood, etc CHARACTERISTICS / ADVANTAGES ▪ High-strength bonding/grouting adhesive. ▪ Tolerant to moisture before, during and after cure. ▪ Excellent adhesion to most structural materials. ▪ Convenient easy-to-mix ratio A:B = 1:1 by volume. ▪ Easy-to-use for bonding/grouting applications. ▪ Fast initial set; rapid gain to ultimate strengths. ▪ USDA-certified for use in food plants. For more information https://usa.sika.com/content/dam/dms/us01/7/pds-cpd-Sikadur32HiMod-us.pdf
Original price was: $97.17.$93.17Current price is: $93.17.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
Reviews
There are no reviews yet.