1
$393.99
Original price was: $199.66.$183.68Current price is: $183.68.
100 in stock
Related products
2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing CHARACTERISTICS / ADVANTAGES Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance Packaging Component A: Component B: A+B set 4 kg 2 kg 6 kg 8 kg 4 kg 12 kg For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_-31_cf_slow.pdf
Original price was: $59.63.$55.90Current price is: $55.90.Add to cart
SikaSwell® A Hydrophilic swellable joint sealing profiles SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Usage Joint sealing: Construction joints Pipe and steel work penetrations through walls and floor slabs Around all types of penetrations and connection joints Construction joints in cable ducts Advantages Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Can be applied on different substrates BBA system approvals with SikaSwell S-2 Available in different sizes
Original price was: $70.55.$66.55Current price is: $66.55.Add to cart
2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT Composition OF Polyurethane DESCRIPTION Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-359 BH may only be used by experienced professionals. Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring ▪ Particularly suitable for car park decks, ramps and warehouses etc. CHARACTERISTICS / ADVANTAGES ▪ Tough-elastic ▪ UV resistant ▪ Good mechanical and chemical resistance ▪ Watertight ▪ Non-yellowing ▪ Easy application ▪ Slip resistant surface possible ▪ Easy to clean and maintain Packaging Part A: 16.5 kg containers Part B: 3.5 kg containers Part A + B: 20.0 kg ready to mix units
Original price was: $306.14.$298.49Current price is: $298.49.Add to cart
ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: ▪ Rebars / reinforcing steel ▪ Threaded rods ▪ Bolts and special fastening systems ▪ Concrete ▪ Solid masonry ▪ Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ▪ Hard natural stone ▪ Solid rock ▪Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES ▪ Fast curing ▪ Standard guns can be used ▪ Medium to high load capacity ▪ ETA Approval available ▪ Suitable for cracked concrete ▪ Drinking Water certified ▪ LEED Attestation available ▪ Non-sag, even overhead ▪ Styrene-free ▪ Low odour ▪ Low wastage APPROVALS / CERTIFICATES ▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. ▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking ▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge 12 cartridges per box Pallet: 75 boxes For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf
Original price was: $22.89.$22.36Current price is: $22.36.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
Reviews
There are no reviews yet.