1
ر.س210.00
Original price was: ر.س750.00.ر.س690.00Current price is: ر.س690.00.
100 in stock
Related products
2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing CHARACTERISTICS / ADVANTAGES Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance Packaging Component A: Component B: A+B set 4 kg 2 kg 6 kg 8 kg 4 kg 12 kg For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_-31_cf_slow.pdf
Original price was: ر.س224.00.ر.س210.00Current price is: ر.س210.00.Add to cart
EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance Packaging Part A: 4 kg container Part B: 2 kg container (A + B) 6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf
Original price was: ر.س224.00.ر.س210.00Current price is: ر.س210.00.Add to cart
Selected grades of quartz sand for special flooring application and a filler for the preparation of industrial coatings are added as a supporting compound to SIKAFLOOR products. Sikafloor® - 161 Sikafloor® - 264 product characreristics 0.01 – 1.2 mm Grading 1.8 kg/Lt Bulk Density 25 kg bag Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf
Original price was: ر.س51.75.ر.س46.00Current price is: ر.س46.00.Add to cart
HEAVY DUTY EPOXY RESIN FLOOR SCREED Composition Epoxy resin and selected natural aggregates DESCRIPTION Sikafloor®-190 Screed is a three component solventfree mortar screed based on epoxy resins and specially graded aggregates. Suitable for use in hot and tropical and climatic conditions. USES Sikafloor®-190 Screed may only be used by experienced professionals. Sikafloor®-190 Screed is used as a non-slip and abrasion resistant epoxy resin flooring screed in applications such as: ▪ Flooring subject to moderate or heavy loading ▪ Workshop and factory floors ▪ Machine shops and warehouses ▪ Depots and loading ramps ▪ Hangars ▪ Car parks with higher anticipated load ▪ Stairs CHARACTERISTICS / ADVANTAGES ▪ Easy and fast to apply ▪ Excellent adhesion to substrate ▪The screed may be mechanically smoothed using a plastic coated disk ▪ Non-slip, non-skid finish possible ▪ Excellent abrasion resistance ▪ High mechanical strength ▪ Permeable to water vapour ▪ Compatible with suitable Sikafloor® coatings Packaging Component A 2.41 kg unit Component B 0.50 kg unit Component C 25 kg bag
Original price was: ر.س230.00.ر.س218.50Current price is: ر.س218.50.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
Reviews
There are no reviews yet.