Sale!

Sika AnchorFix®-2+ Tropical

Original price was: ر.س86.00.Current price is: ر.س84.00.

120 in stock

Category:

Description

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS

MORE DESCRIPTION

Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions.

USES

Sika AnchorFix®-2+ Tropical may only be used by experienced professionals.
As a fast curing anchoring adhesive for all grades of:
▪ Rebars / reinforcing steel
▪ Threaded rods
▪ Bolts and special fastening systems
▪ Concrete
▪ Solid masonry
▪ Steel
Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface
staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation
of possible substrates, particularly in terms of
strength, composition and porosity:
▪ Hard natural stone
▪ Solid rock

▪Component A : Component B = 10 : 1 by volume

CHARACTERISTICS / ADVANTAGES

▪ Fast curing
▪ Standard guns can be used
▪ Medium to high load capacity
▪ ETA Approval available
▪ Suitable for cracked concrete
▪ Drinking Water certified
▪ LEED Attestation available
▪ Non-sag, even overhead
▪ Styrene-free
▪ Low odour
▪ Low wastage

APPROVALS / CERTIFICATES

▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020,
certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking.
▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of
Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020,
certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking
▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543

Packaging

300 mL standard cartridge                                                        12 cartridges per box
Pallet: 75 boxes

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Additional information

Weight 0.300 kg

Reviews

There are no reviews yet.

Be the first to review “Sika AnchorFix®-2+ Tropical”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikadur®-32 Hi-Mod

HIGH-MODULUS, HIGH-STRENGTH, EPOXY BONDING/GROUTING ADHESIVE Chemical Base:- 100 % epoxy   PRODUCT DESCRIPTION Sikadur®-32 Hi-Mod is a multi-purpose, 2-component, 100 % solids, moisture-tolerant structural epoxy adhesive. It conforms to the current ASTM C-881 Types I, II, and V, Grade 2, Class C and AASHTO M-235 specifications. USES Sikadur®-32 Hi-Mod may only be used by experienced professionals. Bond fresh, plastic concrete to hardened concrete and steel. ▪Grout horizontal cracks in structural concrete and wood by gravity feed. ▪ Machinery and ‘robotic’ base-plate grout. ▪Structural adhesive for concrete, masonry, metal, wood, etc CHARACTERISTICS / ADVANTAGES ▪ High-strength bonding/grouting adhesive. ▪ Tolerant to moisture before, during and after cure. ▪ Excellent adhesion to most structural materials. ▪ Convenient easy-to-mix ratio A:B = 1:1 by volume. ▪ Easy-to-use for bonding/grouting applications. ▪ Fast initial set; rapid gain to ultimate strengths. ▪ USDA-certified for use in food plants.   For more information https://usa.sika.com/content/dam/dms/us01/7/pds-cpd-Sikadur32HiMod-us.pdf

Original price was: ر.س365.00.Current price is: ر.س350.00.Add to cart

Sikadur®-42 MP Slow 140Kg

3-PART, MULTI PURPOSE EPOXY GROUTING SYSTEM Composition:- Epoxy resin DESCRIPTION Sikadur®-42 MP Slow is a three-component, multipurpose, moisture tolerant, epoxy grouting system. Suitable for use in hot and tropical climatic conditions. USES Sikadur®-42 MP Slow may only be used by experienced professionals. High-strength grouting and fixing of: ▪ Starter bars ▪ Anchors ▪ Fasteners ▪ Tie rods ▪ Crash barrier posts ▪ Fence and railing posts ▪Under-grouting and bedding of: 1- Base plates 2- Machine bases, seat base-plates for light and heavy 3- Machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. ▪ Bridge bearings ▪ Mechanical joints (i.e. road/bridge/deck types etc.) ▪Sleeper-less, direct rail fixing: ▪ Crane tracks ▪ Light rail and permanent way in tunnels ▪ Light rail and permanent way over bridges CHARACTERISTICS / ADVANTAGES ▪ High early strength ▪ Ready-to-mix, pre-batched units ▪ Moisture tolerant ▪ Non-shrink ▪ Corrosion and chemically resistant ▪ Stress and impact resistant ▪ High compressive strength ▪ High vibration resistance ▪ Low coefficient of thermal expansion APPROVALS / CERTIFICATES ▪ Testing according to EN 1504-6.   For more information https://gcc.sika.com/content/dam/dms/gcc/f/sikadur_-42_mp_slow.pdf

Original price was: ر.س1,600.00.Current price is: ر.س1,480.00.Add to cart

SikaFloor -263 SL

SELF-SMOOTHING PIGMENTED EPOXY RESIN FOR FLOORING APPLICATION Epoxy material consisting of three compounds (sikadur 504 + B + A) at a rate of  (25:1:1) free of solvents to give self-leveling colored floors Sikafloor®-263 SL is a two part (filler supplied separately), self-smoothing, pigmented, epoxy resin for flooring application. Suitable for use in hot and tropical climatic conditions. Product use and characteristics The thickness ranges from 1.5 mm to 5.0 mm on industrial floors that are subject to relatively heavy loads. Food, drug and chemical factories Electricity and water stations Laboratories and rooms exposed to radiation Exhibitions, presentation rooms, training and assembly halls Hard surfaces such as concrete and mortar Maintenance workshops Warehouses Garages and car parks hangars production areas Water and liquid insulator High compressive strength Solvent-free and non-flammable Economical and easy to apply, clean and maintain Highly fillable Good chemical and mechanical resistance Easy application Liquid proof Gloss finish Slip resistant surface possible   Sikafloor®-263 SL is used as self-smoothing system for concrete and cement screeds with medium to heavy wear, e.g. for: ▪ Storage warehouses ▪ Assembly halls ▪ Maintenance workshops ▪ Garages and car parks ▪ Loading bays ▪ Aircraft hangars ▪ Plant rooms ▪ Clean rooms ▪ Production areas ▪ Dry food processing plants ▪ Pharmaceutical manufacturing   For more information https://gcc.sika.com/content/dam/dms/gcc/x/sikafloor_-263_sl.pdf

Original price was: ر.س815.00.Current price is: ر.س780.00.Add to cart

(العربية) Sika Gard – 700S 20 Ltr

Sorry, this entry is only available in Arabic.

Original price was: ر.س750.00.Current price is: ر.س690.00.Add to cart

Home Category Products My account
0 ر.س0.00
Select your currency
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon