Processors Department

Sika Primer -11 W+

LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES DESCRIPTION Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions. USES Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades. A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor CHARACTERISTICS / ADVANTAGES ▪ Very good weathering resistance ▪ Movement capability of ±50 % (ASTM C 719) ▪ Good adhesion to a wide range of substrates ▪ Neutral cure ▪ Low VOC content An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality. Protect the substrate from moisture entering from the tiles Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption Easy to apply, you can use brush, roller or wipe Walls of hospitals, offices and corners with gypsum board and cement board Heated floors (water and electricity systems) Packaging 300 ml cartridge, 12 cartridges per box 600 ml foil pack, 20 foil packs per box For more information https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf

Original price was: $61.23.Current price is: $53.24.Add to cart

Sika MonoTop®-615 HSF SA

FORMERLY KNOWN AS SIKAREP® HSF SA. MULTI-PURPOSE, HIGH STRENGTH, FIBRE-REINFORCED, PATCHING AND REPAIR MORTAR Composition:- Polymer containing cementitious mortar with different additives and synthetic fibres MORE DESCRIPTION Sika MonoTop®-615 HSF SA is a cementitious, synthetic fibre reinforced, silica fume and polymer containing, one-component repair mortar. Suitable for use in hot and tropical climatic conditions. USES Sika MonoTop®-615 HSF SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications. CHARACTERISTICS / ADVANTAGES ▪ Easy to mix, apply and finish ▪ Good adhesion ▪ Shrinkage compensated ▪ Compatible with the properties of typical concretes ▪ Low water absorption, but vapour permeable ▪ Non corrosive ▪ Excellent chloride and carbonation resistance ▪ Fibre reinforced ▪ High strength For more information https://gcc.sika.com/content/dam/dms/gcc/b/sika_monotop_-615hsfsa.pdf

Original price was: $24.49.Current price is: $22.96.Add to cart

(العربية) Sikafloor 270 Level 25kg

Sorry, this entry is only available in Arabic.

Original price was: $18.63.Current price is: $15.97.Add to cart

Sikafloor®-100 Level SA

Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish. Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc. Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic. Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags

Original price was: $18.63.Current price is: $16.77.Add to cart

Sika Antisol® WB

CURING COMPOUND, PRIMER, SEALER AND SURFACE HARDENER FOR FRESHLY LAID CONCRETE Composition:- Aqueous solution of acrylic copolymer dispersion DESCRIPTION Sika® Antisol® WB is a ready to use, solvent free, water based liquid curing compound for preventing the evaporation of mixing water in concrete. It is ready for use and simple to apply. Suitable for use in hot and tropical climatic conditions. USES Sika® Antisol® WB can be applied on site and in precast plants. It has been specially developed for use as a high quality curing and sealing compound for interior or exterior applications. Sika® Antisol® WB is suitable for all kinds of concrete, horizontal and vertical applications and large areas of exposed concrete, such as: ▪ Highways ▪ Runways and taxiways ▪ Aprons and hard standings ▪ Roof decks ▪ Pre-stressed beams and piers ▪ Irrigation canals / channels CHARACTERISTICS / ADVANTAGES Sika® Antisol® WB has the following characteristics: ▪Reduces incidence of plastic cracking ▪Forms stable film on the surface to provide excellent curing and sealing properties ▪ Ensure achievement of desired strengths, minimize shrinkage ▪ Alleviates other costly methods such as Hessian – watering ▪ Increases frost resistance ▪Reduces dusting. Seals, primes and hardnens cement based compositions ▪ Non-flammable, non-toxic and non-staining ▪Considerable reduction in loss of water from concrete ▪ Cured film acts as primer between concrete surface and coating material Packaging 20 L cans 200 L drums

Original price was: $319.45.Current price is: $308.80.Add to cart

Sikacrete® 112

Free flowing micro-concrete for grouting and repair Mixture of Portland Cement and graded aggregates Product Description Sikacrete® 112 one component, free-flowing, high strength, cement based microconcrete with a maximum aggregate size of 5 mm. Suitable for use in tropical and hot climatic conditions. Uses  Sikacrete® 112 used for the structural repair of deteriorated concrete.  It is ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications.  A typical application is the re-profiling of damaged concrete members, using formwork.  Also suitable for base plate grouting where thickness exceeds 75 mm. Characteristics / Advantages  One component, requires the addition of water only  Reduced waste and risk of mixing failures  Easy to mix, apply and finish  Economical Excellent adhesion Shrinkage compensated Rapid strength development  Compatible with the properties of typical concrete  Vapour permeable High resistance to freeze/thaw cycling

Original price was: $13.31.Current price is: $12.25.Read more

Sikacrete®-114 SA

FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR Composition:- Portland cement, selected fillers and aggregates, special additives. DESCRIPTION Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete. Suitable for use in hot and tropical climatic conditions. USES Sikacrete®-114 SA is used for the structural repair of deteriorated concrete. ▪ Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. ▪ A typical application is the re-profiling of damaged concrete members, using formwork. ▪ Suitable for base plate grouting where thickness exceeds 100 millimetre. ▪ Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump CHARACTERISTICS / ADVANTAGES ▪ One component, requires the addition of water only ▪ Reduced waste and risk of mixing failures ▪ Easy to mix, apply and finish ▪ Economical ▪ Excellent adhesion ▪ Shrinkage compensated ▪ Rapid strength development ▪ Compatible with the properties of typical concrete ▪ Vapour permeable For more information https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf

Original price was: $17.84.Current price is: $16.84.Add to cart

SikaGrout®-114 SA

CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT Composition :- Portland cement, selected fillers and aggregates, special additives DESCRIPTION SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength. Suitable for use in hot and tropical climatic conditions USES SikaGrout®-114 SA is used for grouting in the following: ▪ Machine foundations ▪ Columns in pre-cast construction ▪ Concrete anchors, cavities, gaps and recesses ▪ Base plates ▪ General concrete repairs ▪ Bridge bearing pads CHARACTERISTICS / ADVANTAGES SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial properties: ▪ Easy to mix ▪ Good flow characteristics ▪ Adjustable consistency ▪ High final strengths ▪ Non-corrosive and iron-free APPROVALS / CERTIFICATES Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C Packaging 25 kg bag For more information https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf

Original price was: $9.05.Current price is: $8.52.Add to cart

SikaGrout®-212

General Purpose cementitious grout Chemical Base:- Cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. USES ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out CHARACTERISTICS / ADVANTAGES ▪ Easy to use (ready to mix powder) ▪Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪Blend of shrinkage-reducing and plasticizing/waterreducing agents ▪ Low heat build-up ▪Excellent for pumping: does not segregate, even at high flow. ▪No build-up on equipment hopper ▪ Superior freeze/thaw resistance ▪ Resistant to oil and water APPROVALS / STANDARDS ▪ Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout®-212 is USDA certifiable Packaging 50 lb (22.7 kg) bag For more information https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf

Original price was: $34.00.Current price is: $12.25.Read more

SikaGrout®-214 SA

CEMENTITOUS, HIGH EARLY STRENGTH, NON-SHRINK PRECISION GROUT Composition:- Portland cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-214 SA is a cementitious, free flowing, economical, non-shrink precision grout with high early and ultimate strength. Suitable for use in hot and tropical climatic conditions. USES SikaGrout®-214 SA precision grout is used for grouting in the following: ▪ Machine Foundations ▪ Columns in pre-cast construction ▪ Base plates ▪ Concrete anchors, cavities, gaps and recesses ▪ General concrete repairs ▪ Joint nosing ▪ Structural concrete repairs ▪ Bridge bearings CHARACTERISTICS / ADVANTAGES SikaGrout®-214 SA is an easy to use grout requiring only the addition of water. It offers the following beneficial properties: ▪ Easy to mix ▪ High early strength ▪ Good flow characteristics ▪ Non-shrink ▪ Adjustable consistency ▪ High final strengths ▪ Non-corrosive and iron-free APPROVALS / CERTIFICATES Complies with CRD-C621-83-10.2 and ASTM C1107 as Type C Packaging 25 kg bag For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikagrout_-214_sa.pdf

Original price was: $13.31.Current price is: $12.25.Add to cart

SikaLatex 200 Liter

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE Composition:- Styrene butadiene emulsion DESCRIPTION SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Suitable for use in hot and tropical climatic conditions. Sika latex is added to (Portland cement + quartz sand + water). USES SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications: ▪ Grouts and screeds ▪ Patch repair mortars ▪ Mansonry mortars ▪ Renders ▪ Tile adhesives CHARACTERISTICS / ADVANTAGES The main advantages of SikaLatex® are: ▪ Increased adhesion ▪ Reduced shrinkage and cracking ▪ Increased abrasion resistance ▪ Reduced permeability ▪ Improved workability ▪ User friendly ▪ Suitable on most common construction substrates SUSTAINABILITY SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Original price was: $598.97.Current price is: $581.67.Add to cart

SikaLatex 5 Liter

Original price was: $26.02.Current price is: $22.96.Add to cart

SikaRep® Fine SA 25Kg

ONE COMPONENT, ECONOMICAL, POLYMER MODIFIED, PORE SEALER / FINISHING MORTAR Composition:- Polymer containing cementitious mortar with different additives. DESCRIPTION SikaRep® Fine SA is a cementitious, silica fume containing, polymer modified one component pore sealer and finishing mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® Fine SA can be used as a: ▪Pore sealer / finishing mortar on cementitious substrates. ▪Thin layer rendering on horizontal and vertical areas in building and civil engineering construction, for external and internal finishing etc. ▪Levelling mortar on uneven substrates, and profiled concrete surfaces. ▪ Repair mortar to fill honeycombing pores etc. ▪Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings. CHARACTERISTICS / ADVANTAGES ▪ Easy to use ▪ Excellent workability ▪ Good mechanical strengths ▪ Can be applied by the wet-spray method ▪ Non-corrosive ▪ Adjustable consistency ▪ Economical Soft, smooth, ready-to-use repair mortar for concrete containing steam, silica and organic matter Used for filling and nesting gaps between 1 - 10 mm Polymer-modified cementitious sealant to be mixed with water, grouting mechanics, 7.5 liters per 25 kilos Closing pores and leveling different surfaces Restoration of capillary cracks and micro voids End repair works, joint joints and equal bends in concrete surfaces Homogeneous texture and resistance to mechanical stresses Can be sprayed with a vacuum gun Friendly, non-toxic and non-toxic economic Indoor and outdoor installation Vertical and horizontal

Original price was: $16.77.Current price is: $15.17.Add to cart

SikaRep® SA

MULTI-PURPOSE, ECONOMICAL, PATCHING AND REPAIR MORTAR Composition:- Polymer containing cementitious mortar with different additives DESCRIPTION SikaRep® SA is a cementitious, silica fume and polymer containing, one-component repair mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications. CHARACTERISTICS / ADVANTAGES ▪ Easy to mix, apply and finish ▪ Good adhesion ▪ Shrinkage compensated ▪ Compatible with the properties of typical concretes ▪ Low water absorption, but vapour permeable ▪ Non-corrosive ▪ Excellent chloride and carbonation resistance

Original price was: $16.84.Current price is: $14.91.Add to cart

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: $76.40.Current price is: $75.60.Add to cart

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings CHARACTERISTICS / ADVANTAGES ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use Packaging 20, 40 kg bag For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: $15.31.Current price is: $14.69.Add to cart

Main Menu