LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES
DESCRIPTION
Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions.
USES
Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades.
A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor
CHARACTERISTICS / ADVANTAGES
Very good weathering resistance
Movement capability of ±50 % (ASTM C 719)
Good adhesion to a wide range of substrates
Neutral cure
Low VOC content
An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality.
Protect the substrate from moisture entering from the tiles
Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption
Easy to apply, you can use brush, roller or wipe
Walls of hospitals, offices and corners with gypsum board and cement board
Heated floors (water and electricity systems)
Packaging
300 ml cartridge, 12 cartridges per box
600 ml foil pack, 20 foil packs per box
For more information
https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf
ر.س230.00 Original price was: ر.س230.00.ر.س200.00Current price is: ر.س200.00.Add to cart
FORMERLY KNOWN AS SIKAREP® HSF SA.
MULTI-PURPOSE, HIGH STRENGTH, FIBRE-REINFORCED, PATCHING AND REPAIR MORTAR
Composition:- Polymer containing cementitious mortar with different additives and synthetic fibres
MORE DESCRIPTION
Sika MonoTop®-615 HSF SA is a cementitious, synthetic fibre reinforced, silica fume and polymer containing,
one-component repair mortar.
Suitable for use in hot and tropical climatic conditions.
USES
Sika MonoTop®-615 HSF SA can be used for cosmetic
or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications.
CHARACTERISTICS / ADVANTAGES
Easy to mix, apply and finish
Good adhesion
Shrinkage compensated
Compatible with the properties of typical concretes
Low water absorption, but vapour permeable
Non corrosive
Excellent chloride and carbonation resistance
Fibre reinforced
High strength
For more information
https://gcc.sika.com/content/dam/dms/gcc/b/sika_monotop_-615hsfsa.pdf
ر.س92.00 Original price was: ر.س92.00.ر.س86.25Current price is: ر.س86.25.Add to cart
Sorry, this entry is only available in Arabic.
ر.س70.00 Original price was: ر.س70.00.ر.س60.00Current price is: ر.س60.00.Add to cart
Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish. Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc. Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic. Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags
ر.س70.00 Original price was: ر.س70.00.ر.س63.00Current price is: ر.س63.00.Add to cart
CURING COMPOUND, PRIMER, SEALER AND SURFACE HARDENER FOR FRESHLY LAID CONCRETE
Composition:- Aqueous solution of acrylic copolymer dispersion
DESCRIPTION
Sika® Antisol® WB is a ready to use, solvent free, water based liquid curing compound for preventing the
evaporation of mixing water in concrete. It is ready for use and simple to apply.
Suitable for use in hot and tropical climatic conditions.
USES
Sika® Antisol® WB can be applied on site and in precast plants. It has been specially developed for use as a high quality curing and sealing compound for interior or exterior applications.
Sika® Antisol® WB is suitable for all kinds of concrete, horizontal and vertical applications and large areas of
exposed concrete, such as:
Highways
Runways and taxiways
Aprons and hard standings
Roof decks
Pre-stressed beams and piers
Irrigation canals / channels
CHARACTERISTICS / ADVANTAGES
Sika® Antisol® WB has the following characteristics:
Reduces incidence of plastic cracking
Forms stable film on the surface to provide excellent curing and sealing properties
Ensure achievement of desired strengths, minimize shrinkage
Alleviates other costly methods such as Hessian – watering
Increases frost resistance
Reduces dusting. Seals, primes and hardnens cement based compositions
Non-flammable, non-toxic and non-staining
Considerable reduction in loss of water from concrete
Cured film acts as primer between concrete surface and coating material
Packaging
20 L cans
200 L drums
ر.س1,200.00 Original price was: ر.س1,200.00.ر.س1,160.00Current price is: ر.س1,160.00.Add to cart
Free flowing micro-concrete for grouting and repair Mixture of Portland Cement and graded aggregates Product Description Sikacrete® 112 one component, free-flowing, high strength, cement based microconcrete with a maximum aggregate size of 5 mm. Suitable for use in tropical and hot climatic conditions. Uses Sikacrete® 112 used for the structural repair of deteriorated concrete. It is ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications. A typical application is the re-profiling of damaged concrete members, using formwork. Also suitable for base plate grouting where thickness exceeds 75 mm. Characteristics / Advantages One component, requires the addition of water only Reduced waste and risk of mixing failures Easy to mix, apply and finish Economical Excellent adhesion Shrinkage compensated Rapid strength development Compatible with the properties of typical concrete Vapour permeable High resistance to freeze/thaw cycling
ر.س50.00 Original price was: ر.س50.00.ر.س46.00Current price is: ر.س46.00.Read more
FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR
Composition:- Portland cement, selected fillers and aggregates, special additives.
DESCRIPTION
Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete.
Suitable for use in hot and tropical climatic conditions.
USES
Sikacrete®-114 SA is used for the structural repair of deteriorated concrete.
Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications.
A typical application is the re-profiling of damaged concrete members, using formwork.
Suitable for base plate grouting where thickness exceeds 100 millimetre.
Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump
CHARACTERISTICS / ADVANTAGES
One component, requires the addition of water only
Reduced waste and risk of mixing failures
Easy to mix, apply and finish
Economical
Excellent adhesion
Shrinkage compensated
Rapid strength development
Compatible with the properties of typical concrete
Vapour permeable
For more information
https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf
ر.س67.00 Original price was: ر.س67.00.ر.س63.25Current price is: ر.س63.25.Add to cart
CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT
Composition :- Portland cement, selected fillers and aggregates, special additives
DESCRIPTION
SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength.
Suitable for use in hot and tropical climatic conditions
USES
SikaGrout®-114 SA is used for grouting in the following:
Machine foundations
Columns in pre-cast construction
Concrete anchors, cavities, gaps and recesses
Base plates
General concrete repairs
Bridge bearing pads
CHARACTERISTICS / ADVANTAGES
SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial
properties:
Easy to mix
Good flow characteristics
Adjustable consistency
High final strengths
Non-corrosive and iron-free
APPROVALS / CERTIFICATES
Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C
Packaging
25 kg bag
For more information
https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf
ر.س34.00 Original price was: ر.س34.00.ر.س32.00Current price is: ر.س32.00.Add to cart
General Purpose cementitious grout
Chemical Base:- Cement, selected fillers and aggregates, special additives
MORE DESCRIPTION
SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2-
stage shrinkage compensating mechanism.
USES
General purpose grouting
Machine and column base plates
Anchor rods, bearing plates
Ram in place as a dry pack
Trowel-apply as a medium flow
Pour or pump as high flow
Bedding joints in pre-cast concrete sections
Filling cavities, voids, gaps and recesses
On grade, above and below grade
Indoors and out
CHARACTERISTICS / ADVANTAGES
Easy to use (ready to mix powder)
Shrinkage compensated properties in both the plastic and hardened states
Multiple fluidity with a single component
Good bond to concrete
Non-metallic, will not stain or rust
Contains no chloride
Blend of shrinkage-reducing and plasticizing/waterreducing agents
Low heat build-up
Excellent for pumping: does not segregate, even at high flow.
No build-up on equipment hopper
Superior freeze/thaw resistance
Resistant to oil and water
APPROVALS / STANDARDS
Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827
SikaGrout®-212 is USDA certifiable
Packaging
50 lb (22.7 kg) bag
For more information
https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf
ر.س50.00 Original price was: ر.س50.00.ر.س46.00Current price is: ر.س46.00.Read more
CEMENTITOUS, HIGH EARLY STRENGTH, NON-SHRINK PRECISION GROUT
Composition:- Portland cement, selected fillers and aggregates, special additives
MORE DESCRIPTION
SikaGrout®-214 SA is a cementitious, free flowing, economical, non-shrink precision grout with high early and ultimate strength.
Suitable for use in hot and tropical climatic conditions.
USES
SikaGrout®-214 SA precision grout is used for grouting in the following:
Machine Foundations
Columns in pre-cast construction
Base plates
Concrete anchors, cavities, gaps and recesses
General concrete repairs
Joint nosing
Structural concrete repairs
Bridge bearings
CHARACTERISTICS / ADVANTAGES
SikaGrout®-214 SA is an easy to use grout requiring only the addition of water. It offers the following beneficial properties:
Easy to mix
High early strength
Good flow characteristics
Non-shrink
Adjustable consistency
High final strengths
Non-corrosive and iron-free
APPROVALS / CERTIFICATES
Complies with CRD-C621-83-10.2 and ASTM C1107 as Type C
Packaging
25 kg bag
For more information
https://gcc.sika.com/content/dam/dms/gcc/g/sikagrout_-214_sa.pdf
ر.س50.00 Original price was: ر.س50.00.ر.س46.00Current price is: ر.س46.00.Add to cart
WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE
Composition:- Styrene butadiene emulsion
DESCRIPTION
SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and
high quality site-mix mortars.
Suitable for use in hot and tropical climatic conditions.
Sika latex is added to (Portland cement + quartz sand + water).
USES
SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications:
Grouts and screeds
Patch repair mortars
Mansonry mortars
Renders
Tile adhesives
CHARACTERISTICS / ADVANTAGES
The main advantages of SikaLatex® are:
Increased adhesion
Reduced shrinkage and cracking
Increased abrasion resistance
Reduced permeability
Improved workability
User friendly
Suitable on most common construction substrates
SUSTAINABILITY
SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation
System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM
ر.س2,250.00 Original price was: ر.س2,250.00.ر.س2,185.00Current price is: ر.س2,185.00.Add to cart
WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE
Composition:- Styrene butadiene emulsion
DESCRIPTION
SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and
high quality site-mix mortars.
Suitable for use in hot and tropical climatic conditions.
Sika latex is added to (Portland cement + quartz sand + water).
USES
SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications:
Grouts and screeds
Patch repair mortars
Mansonry mortars
Renders
Tile adhesives
CHARACTERISTICS / ADVANTAGES
The main advantages of SikaLatex® are:
Increased adhesion
Reduced shrinkage and cracking
Increased abrasion resistance
Reduced permeability
Improved workability
User friendly
Suitable on most common construction substrates
SUSTAINABILITY
SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation
System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM
ر.س97.75 Original price was: ر.س97.75.ر.س86.25Current price is: ر.س86.25.Add to cart
ONE COMPONENT, ECONOMICAL, POLYMER MODIFIED, PORE SEALER / FINISHING MORTAR
Composition:- Polymer containing cementitious mortar with different additives.
DESCRIPTION
SikaRep® Fine SA is a cementitious, silica fume containing, polymer modified one component pore sealer and
finishing mortar.
Suitable for use in hot and tropical climatic conditions.
USES
SikaRep® Fine SA can be used as a:
Pore sealer / finishing mortar on cementitious substrates.
Thin layer rendering on horizontal and vertical areas in building and civil engineering construction, for external and internal finishing etc.
Levelling mortar on uneven substrates, and profiled concrete surfaces.
Repair mortar to fill honeycombing pores etc.
Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings.
CHARACTERISTICS / ADVANTAGES
Easy to use
Excellent workability
Good mechanical strengths
Can be applied by the wet-spray method
Non-corrosive
Adjustable consistency
Economical
Soft, smooth, ready-to-use repair mortar for concrete containing steam, silica and organic matter
Used for filling and nesting gaps between 1 - 10 mm
Polymer-modified cementitious sealant to be mixed with water, grouting mechanics, 7.5 liters per 25 kilos
Closing pores and leveling different surfaces
Restoration of capillary cracks and micro voids
End repair works, joint joints and equal bends in concrete surfaces
Homogeneous texture and resistance to mechanical stresses
Can be sprayed with a vacuum gun
Friendly, non-toxic and non-toxic
economic
Indoor and outdoor installation
Vertical and horizontal
ر.س63.00 Original price was: ر.س63.00.ر.س57.00Current price is: ر.س57.00.Add to cart
MULTI-PURPOSE, ECONOMICAL, PATCHING AND REPAIR MORTAR
Composition:- Polymer containing cementitious mortar with different additives
DESCRIPTION
SikaRep® SA is a cementitious, silica fume and polymer containing, one-component repair mortar.
Suitable for use in hot and tropical climatic conditions.
USES
SikaRep® SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior
or interior, horizontal and vertical applications.
CHARACTERISTICS / ADVANTAGES
Easy to mix, apply and finish
Good adhesion
Shrinkage compensated
Compatible with the properties of typical concretes
Low water absorption, but vapour permeable
Non-corrosive
Excellent chloride and carbonation resistance
ر.س63.25 Original price was: ر.س63.25.ر.س56.00Current price is: ر.س56.00.Add to cart
BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION
Composition:- Portland cement, epoxy resin, selected aggregates and additives
DESCRIPTION
SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection.
SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7.
Suitable for use in hot and tropical climatic conditions.
USES
Suitable for control of anodic areas (Principle 11,
method 11.1 EN 1504-9)
Suitable in concrete repair as corrosion protection for
reinforcement.
Suitable as a bonding primer on concrete and mortar
CHARACTERISTICS / ADVANTAGES
Contains EpoCem® technology - improved bonding agent
Extended open times for repair mortars
Compatible with most Sika® repair mortars
Excellent adhesion to concrete and steel
Contains corrosion inhibitor
Certified for application under dynamic load conditions
Good resistance to water and chloride penetration
High shear strength
Long pot life
Easy to mix
Can be brushed on or applied using spray gun
For more information
https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf
ر.س287.00 Original price was: ر.س287.00.ر.س284.00Current price is: ر.س284.00.Add to cart
HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY
Polymer modified cementitious putty
DESCRIPTION
SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions.
USES
SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are:
Pore sealer on cementitious substrates
For external and internal wall/celling smoothening
Fairing coat before application of other coatings
Thin smoothing layer on vertical areas in building
Can be used in civil engineering construction before application of acrylic decorative & protective coatings
Filling putty of small bugholes
Reprofiling of small defects on edges and to form decorative covings
CHARACTERISTICS / ADVANTAGES
Good bond strength on cementitious substrates
Very good workability, easy to level, smooth & sand
Fine finish and high scratch resistance
Applicable in thick layers up to 3 mm
Fast curing
Reduces top coat consumption
Good mechanical strength
One component, easy to use
Packaging
20, 40 kg bag
For more information
https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf
ر.س57.50 Original price was: ر.س57.50.ر.س55.20Current price is: ر.س55.20.Add to cart