0
$0.00
RAPID SETTING MORTAR Rapid-setting cement powder MORE DESCRIPTION Sika MonoTop®-108 Water Plug AE is a rapid-setting cement mortar for plugging water leaks in concrete and masonry walls. Suitable for use in hot and tropical climatic conditions. USES ▪Instant plugging of negative pressure water inlet through cracks, gravel niches and casting joints. ▪Instant plugging of drained water outlets, during waterproofing treatments. CHARACTERISTICS / ADVANTAGES ▪Rapid setting to avoid washout even in the presence of running water ▪ Hardens within ~60–90 seconds (at 20 °C) Packaging 10 kg bag For more information https://gcc.sika.com/content/dam/dms/gcc/p/sika-monotop-108waterplugae.pdf
Original price was: $29.28.$26.09Current price is: $26.09.Add to cart
SOLVENT-BASED BITUMINOUS COATING FOR PERMANENT PROTECTION OF CONCRETE SURFACES SUBJECT TO AGGRESSIVE SOILS. Composition:- Bituminous Emulsion Solvent-based coating for permanent protection of concrete surfaces subject to aggressive soils. USES To protect concrete surfaces against attack of aggressive soils & subsequent backfills; such as : ▪ Retaining walls. ▪ Basements. ▪ Columns. ▪ Foundations. CHARACTERISTICS / ADVANTAGES As Coating: ▪ Easy application (Brush, roller or airless spray). ▪ No heating required. ▪ Increased coverage rates. ▪ Adheres firmly on most building surfaces. ▪ High resistance to aggressive chemicals and salts. APPROVALS / CERTIFICATES ACI 515 IR-79. Guide to use of waterproofing, damp proofing, protection and decorative barrier systems for Concrete. Chapter 2 section 2.1.1, 2.1.2 and 2.1.3 ASTM D1227 type 3 class 1 Sika Bitumen® -W has been tested as per SCAQMD Rule 1168. Result : VOC Content 0 g/l. Packaging 14 Kg pails 200 kg drums. For more information https://egy.sika.com/content/dam/dms/eg01/w/sika_bitumen.pdf
Original price was: $346.07.$319.45Current price is: $319.45.Add to cart
1-COMPONENT, POLYURETHANE-BASED, SLIGHTLY FLEXIBLE, FOAMING INJECTION RESIN FOR THE PERMANENT WATERTIGHT SEALING OF CRACKS Composition:- Moisture and water reactive one - component, foaming polyurethane resin MORE DESCRIPTION Sika® Injection-107 is a ready-to-use 1-component, polyurethane based, slightly flexible, foaming injection resin for the permanent watertight sealing of cracks, voids and interstices in concrete. Suitable for use in hot and tropical climatic conditions. USES Sika® Injection-107 may only be used by experienced professionals. Sika® Injection-107 is used for permanent watertight sealing with some flexibility to absorb limited movement, in water-bearing cracks and joints in concrete, brickwork and natural stone structures CHARACTERISTICS / ADVANTAGES ▪ Permanently elastic, can absorb limited movements ▪Durable sealing of water-bearing cracks and voids of > 0.3mm ▪ Moisture-reactive, one-component polyurethane resin - water contact is required for the foaming reaction and curing to a permanently flexible sealing compound Packaging Available in metal containers of: 5.3 kg 10.6 kg For more information https://gcc.sika.com/content/dam/dms/gcc/u/sika_injection-107.pdf
Original price was: $119.79.$113.14Current price is: $113.14.Add to cart
ECO-FRIENDLY LIQUID APPLIED WATERPROOFING SOLUTION BASED ON SIKA COELASTIC TECHNOLOGY (CET) Composition:- Polyurethane modified Acrylic Dispersion DESCRIPTION Sikalastic® WR is a cold-applied, highly elastic, onecompont waterborne liquid applied waterproofing membrane. Suitable for the use in hot and tropical climatic conditions. USES ▪For the waterproofing of bathrooms, shower rooms, kitchens and plumbing rooms beneath hard protection, for example ceramic tiles ▪For waterproofing solutions in both new construction and refurbishment projects ▪ For cost efficient waterproofing solution CHARACTERISTICS / ADVANTAGES ▪ Highly elastic and crack-bridging ▪ One-component - ready to use ▪Excellent adhesion on porous and non-porous substrates ▪ Seamless, fully bonded waterproofing membrane ▪ Water vapour permeable APPROVALS / CERTIFICATES ▪Conforms to the requirement of LEED EQ credit 4.2: Low - Emitting Materials. Paints and Coatings: VOC < 100 gm/l ▪Certified by Thomas Bell-Wright International Consultants according to ASTM E84-16 : Standard Test Method for Surface Burning Characteristic of Building Materials. Certificate number: TBW0300202 Packaging 20 kg plastic pails For more information https://gcc.sika.com/content/dam/dms/gcc/1/sikalastic_wr.pdf
Original price was: $133.11.$129.11Current price is: $129.11.Add to cart
Eco-friendly Liquid Applied Roof Waterproofing Solution Based on Sika Co-Elastic Technology (CET) Composition:- Polyurethane modified Acrylic Dispersion DESCRIPTION Sikalastic®-560 GCC is a cold-applied, one-component waterborne liquid applied waterproofing membrane, highly elastic and UV-resistant. Suitable for use in hot climatic conditions. USES ▪For exposed roof waterproofing solutions in both new construction and refurbishment projects ▪ For exposed roofs with many details and complex geometry when accessibility is limited ▪ For cost efficient life cycle extension of failing exposed roofs ▪ For reflective coating to enhance energy efficiency by reducing cooling costs CHARACTERISTICS / ADVANTAGES ▪UV resistant and resistant to yellowing and weathering ▪ Highly elastic and crack-bridging ▪ Non-toxic and VOC compliant water based coating ▪ One component - ready to use ▪Excellent adhesion on porous and non-porous substrates ▪ Seamless, fully bonded waterproofing membrane ▪ Water vapour permeable APPROVALS / CERTIFICATES ▪Conforms to the requirements of LEED EQ Credit 4.2: Low - Emitting Materials: Paints & Coatings: VOC < 100 gm/l ▪USGBC LEED rating: conforms to LEED SS Credit 7.2 - Heat Island Effect-Roof, SRI ≥ 78 ▪ Conforms to Estidama requirements for reflectivity ▪ Conforms to Dubai Green Buildings for reflectivity Packaging 20 kg plastic pails For more information https://ken.sika.com/dms/getdocument.get/e101c1e1-bd9c-4c91-a6d9-e45085c80ce5/sikalastic-560-gcc.pdf
Original price was: $133.11.$129.11Current price is: $129.11.Add to cart
INTEGRAL WATERPROOFING ADMIXTURE FOR MORTAR AND CONCRETE Composition:- Blend of organic and inorganic chemicals MORE DESCRIPTION Sikalite® AE is a ready to use powdered waterproofing admixture for cement / sand mortars and concrete. Suitable for use in hot and tropical climatic conditions. USES Sikalite® AE is used to provide waterproof structural concrete or cement/sand mortars, screeds and renders for walls, facades, floor toppings and jointing mortars. CHARACTERISTICS / ADVANTAGES Sikalite® AE contains pore sealing and water-repelling substances which provide the following beneficial properties: ▪ Reduction in permeability ▪ Increased durability ▪Used in concrete mortar ▪Indoor and Outdoor ▪Floors and walls ▪Embodiment and strengthening of walls, facades and floors Packaging 20 kg bags For more information https://gcc.sika.com/content/dam/dms/gcc/3/sikalite_ae.pdf
Original price was: $15.31.$13.16Current price is: $13.16.Add to cart
SikaSwell® A Hydrophilic swellable joint sealing profiles SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Usage Joint sealing: Construction joints Pipe and steel work penetrations through walls and floor slabs Around all types of penetrations and connection joints Construction joints in cable ducts Advantages Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Can be applied on different substrates BBA system approvals with SikaSwell S-2 Available in different sizes
Original price was: $70.55.$66.55Current price is: $66.55.Add to cart
Chemical Resistant Epoxy Coating Composition:- Epoxy resin DESCRIPTION Sikagard® PW is a two component, solvent free epoxy coating with outstanding mechanical and chemical properties. Suitable for use in hot and tropical climatic conditions. USES Sikagard® PW may only be used by experienced professionals. ▪Chemical resistant protective layer on concrete, structural cementitious mortars, epoxy cement, epoxy resin based products and steel ▪Protection of concrete surfaces / foundations below ground level ▪ Lining in storage tanks, manholes, intakes and silos etc. ▪ Anti-corrosion coating on steel in food processing plants, sewage works, farms, agricultural enterprises, chemical and pharmaceutical facilities and beverage industry CHARACTERISTICS / ADVANTAGES ▪ Suitable for direct contact with potable water ▪ Easy to clean, tough glossy finish Very good resistance to a wide range of chemicals and corrosive vapours ▪ Sewage resistant ▪ Good mechanical and chemical resistance ▪ High build ▪ Impervious to liquids SUSTAINABILITY Sikagard® PW is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 For more information https://gcc.sika.com/dms/getdocument.get/8ea6fab1-e9ef-4b72-a1b5-00621830c5b1/sikagard_pw.pdf
Original price was: $174.37.$171.71Current price is: $171.71.Add to cart
FIBRE-REINFORCED CEMENTITIOUS MORTAR FOR FLEXIBLE WATERPROOFING AND CONCRETE PROTECTION Composition:- Cement modified with polymers, selected alkali-resistant aggregates, microsilica and fibres DESCRIPTION Sikalastic®-152 SA is a 2-component, crack-bridging, fibre-reinforced cementitious mortar, with low elastic modulus with special additives for waterproofing and protection of concrete subgrades subject to flexural strain. Suitable for use in hot and tropical climates. USES ▪Flexible waterproofing and protection of hydraulic structures such as basins, tanks, concrete piping, bridges and canals ▪Waterproofing of bathrooms, shower, terraces, balconies, swimming pools before the application of ceramic tiles bonded with adhesives ▪ Waterproofing and protection of outer walls to be buried into the ground ▪ Inside waterproofing of light counter pressure water of walls and floors in basements CHARACTERISTICS / ADVANTAGES ▪Flexible waterproofing and concrete protection in one product ▪ Very good crack-bridging abilities ▪ Reliable application also in very humid environment ▪All components ready delivered, no additional mixing water required ▪ Applicable also on lightly humid substrate ▪ Non sagging: easy application also on vertical walls ▪Excellent adhesion onto lots of substrates such as concrete, cement mortars, stone, masonry Packaging Ready batched 33 kg units: Comp. A (liquid): 8 kg Comp. B (powder): 25 kg For more information https://gcc.sika.com/content/dam/dms/gcc/0/sikalastic_-152_sa.pdf
Original price was: $67.35.$59.90Current price is: $59.90.Add to cart
Flexible, waterproofing and protective slurry mortar SikaTop® Seal 107 is a two-component, polymer-modified, cementitious waterproofing and protective slurry mortar and Protective Coating for concrete. It is slightly flexible to tolerate fine cracks and suitable in both interior and exterior applications. CHARACTERISTICS / ADVANTAGES SikaTop® Seal 107 provides the following beneficial properties: 1- Improves the watertightness of water-containing concrete tanks, reservoirs, and clearwells. 2- Protects against water penetration, yet water vapor permeable (breathable). 3- Excellent freeze/thaw resistance. 4- Good adhesion to sound, prepared substrates. 5- Easy and fast mixing and application. 6- Good abrasion resistance. 7- Protects against concrete carbonation (80 mils SikaTop® Seal 107 is equivalent to 6 inches of concrete). 8- Can be mixed to slurry or trowelable consistency. 9- Improves concrete/masonry appearance. 10- Available in concrete gray and off-white. 11- SikaTop® Seal 107 is ANSI/NSF 61 potable water compliant. 12- Easy to apply by brush or in thin trowel applications 13- Prebatched components with consistance quality 14- Hand or spray applied 15- Increased frost and salt resistance 16- Very good adhesion 17- Protects against concrete carbonation 18- Protects against water penetration 19- Non toxic – approved for contact with drinking water 20- Non-corrosive to steel or iron 21- Overpaintable USES 1-Horizontal surfaces subjected to light foot traffic (balconies). 2- For waterproofing of drinking water, tanks, reservoirs, and clear wells. 3-For internal and external waterproofing and damp-proofing concrete, mortar blockwork and brickwork. 4-For protection of concrete structures against the deleterious effects of deicing salts and freeze/thaw cycles. 5-For sealing “hairline” cracks in concrete structures not subject to movement surfaces. 6-For interior and exterior waterproofing of basements. 7-Vertical surfaces 8-Potable concrete water tanks/reservoirs 9- Basements and cellars 10- Terraces and balconies 11- Retaining walls 12- Swimming pools and fountains 13- RC gutters and planter boxes 14- Bathroom/toilets 15- Lift pits 16- Seawalls 17-Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork 18- Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack 19- Rigid waterproofing of basement walls in new construction and refurbishment 20- Positive and negative pressure waterproofing 21-Pore / blowhole filling 22- Sealing fine “hairline” cracks in concrete structures (not subject to movement) 23- Levelling mortar for concrete repair works/imperfections 24- Protection against ingress For more information https://chorkeematerial.files.wordpress.com/2017/12/sikatop-seal-107.pdf OR https://usa.sika.com/content/dam/dms/us01/d/pds-cpd-SikaTopSeal%20107-us.pdf
Original price was: $29.02.$27.95Current price is: $27.95.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
