SikaFloor -359 BH RAL 7040

Name: SikaFloor -359 BH RAL 7040 - Sika Building trust
Price: 1121.25 SAR
Availability: InStock

Original price was: ر.س1,150.00.Current price is: ر.س1,121.25.

5 in stock

Category: epoxy flooring

Description

2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT

Composition OF Polyurethane

DESCRIPTION

Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes.
Suitable for use in hot and tropical climatic conditions.

USES

Sikafloor®-359 BH may only be used by experienced professionals.

Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring

▪ Particularly suitable for car park decks, ramps and warehouses etc.

CHARACTERISTICS / ADVANTAGES

▪ Tough-elastic
▪ UV resistant
▪ Good mechanical and chemical resistance
▪ Watertight
▪ Non-yellowing
▪ Easy application
▪ Slip resistant surface possible
▪ Easy to clean and maintain

Packaging

Part A: 16.5 kg containers
Part B: 3.5 kg containers
Part A + B: 20.0 kg ready to mix units

Additional information

Weight	20 kg

Reviews

There are no reviews yet.

Be the first to review “SikaFloor -359 BH RAL 7040”

Related products

Sikadur®-42 MP Slow 140Kg

3-PART, MULTI PURPOSE EPOXY GROUTING SYSTEM Composition:- Epoxy resin DESCRIPTION Sikadur®-42 MP Slow is a three-component, multipurpose, moisture tolerant, epoxy grouting system. Suitable for use in hot and tropical climatic conditions. USES Sikadur®-42 MP Slow may only be used by experienced professionals. High-strength grouting and fixing of: ▪ Starter bars ▪ Anchors ▪ Fasteners ▪ Tie rods ▪ Crash barrier posts ▪ Fence and railing posts ▪Under-grouting and bedding of: 1- Base plates 2- Machine bases, seat base-plates for light and heavy 3- Machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. ▪ Bridge bearings ▪ Mechanical joints (i.e. road/bridge/deck types etc.) ▪Sleeper-less, direct rail fixing: ▪ Crane tracks ▪ Light rail and permanent way in tunnels ▪ Light rail and permanent way over bridges CHARACTERISTICS / ADVANTAGES ▪ High early strength ▪ Ready-to-mix, pre-batched units ▪ Moisture tolerant ▪ Non-shrink ▪ Corrosion and chemically resistant ▪ Stress and impact resistant ▪ High compressive strength ▪ High vibration resistance ▪ Low coefficient of thermal expansion APPROVALS / CERTIFICATES ▪ Testing according to EN 1504-6. For more information https://gcc.sika.com/content/dam/dms/gcc/f/sikadur_-42_mp_slow.pdf

Original price was: ر.س1,600.00.Current price is: ر.س1,480.00.Add to cart

SikaFloor -161

2-PART EPOXY PRIMER, LEVELLING MORTAR AND INTERMEDIATE LAYER USES AND CHARACTERISTICS / ADVANTAGES Sikafloor®-161 may only be used by experienced professionals. For priming concrete substrates, cement screeds and epoxy mortars ▪For low to medium absorbent substrates ▪ Primer for the Sikafloor®-263 SL, Sikafloor®-264 economic flooring systems and Sikalastic®-800 series ▪ Binder for levelling mortars and mortar screeds ▪Intermediate layer underneath Sikafloor®-263 SL and Sikafloor®-264 ▪ Low viscosity ▪ Excellent bond strength ▪ Short waiting times ▪ Multi-purpose Sikafloor®-161 is an economic, two part, low viscosityepoxy resin. Suitable for use in hot and tropical climatic conditions. ▪High quality epoxy primer for interior and exterior floors Primer composed of (A + B) ▪For preparing low and medium absorbent concrete substrates ▪A primer for economical flooring systems ▪Excellent bonding strength ▪Easy to apply with a roller multifunctional ▪It is used in concrete and natural stone Epoxy mortar ▪Self-leveling epoxy floor paint ▪Good penetration and adhesion ▪Primer for three compounds sikfloor 264, sikafloor 264 SG, and sikafloor 263 SL For more information https://gcc.sika.com/content/dam/dms/gcc/s/sikafloor_-161.pdf

Original price was: ر.س780.00.Current price is: ر.س750.00.Add to cart

Sika AnchorFix®-2+ Tropical

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: ▪ Rebars / reinforcing steel ▪ Threaded rods ▪ Bolts and special fastening systems ▪ Concrete ▪ Solid masonry ▪ Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ▪ Hard natural stone ▪ Solid rock ▪Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES ▪ Fast curing ▪ Standard guns can be used ▪ Medium to high load capacity ▪ ETA Approval available ▪ Suitable for cracked concrete ▪ Drinking Water certified ▪ LEED Attestation available ▪ Non-sag, even overhead ▪ Styrene-free ▪ Low odour ▪ Low wastage APPROVALS / CERTIFICATES ▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. ▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking ▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge 12 cartridges per box Pallet: 75 boxes For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Original price was: ر.س86.00.Current price is: ر.س84.00.Add to cart

SikaFloor -263 SL

SELF-SMOOTHING PIGMENTED EPOXY RESIN FOR FLOORING APPLICATION Epoxy material consisting of three compounds (sikadur 504 + B + A) at a rate of (25:1:1) free of solvents to give self-leveling colored floors Sikafloor®-263 SL is a two part (filler supplied separately), self-smoothing, pigmented, epoxy resin for flooring application. Suitable for use in hot and tropical climatic conditions. Product use and characteristics The thickness ranges from 1.5 mm to 5.0 mm on industrial floors that are subject to relatively heavy loads. Food, drug and chemical factories Electricity and water stations Laboratories and rooms exposed to radiation Exhibitions, presentation rooms, training and assembly halls Hard surfaces such as concrete and mortar Maintenance workshops Warehouses Garages and car parks hangars production areas Water and liquid insulator High compressive strength Solvent-free and non-flammable Economical and easy to apply, clean and maintain Highly fillable Good chemical and mechanical resistance Easy application Liquid proof Gloss finish Slip resistant surface possible Sikafloor®-263 SL is used as self-smoothing system for concrete and cement screeds with medium to heavy wear, e.g. for: ▪ Storage warehouses ▪ Assembly halls ▪ Maintenance workshops ▪ Garages and car parks ▪ Loading bays ▪ Aircraft hangars ▪ Plant rooms ▪ Clean rooms ▪ Production areas ▪ Dry food processing plants ▪ Pharmaceutical manufacturing For more information https://gcc.sika.com/content/dam/dms/gcc/x/sikafloor_-263_sl.pdf

Original price was: ر.س815.00.Current price is: ر.س780.00.Add to cart