Main Menu

0 Wishlist
2 $323.97
Sale!

Sika MonoTop®-615 HSF SA

Original price was: $24.49.Current price is: $22.96.

(العربية) مادة معالجة التعشيش

25 in stock

Category:

Description

FORMERLY KNOWN AS SIKAREP® HSF SA.
MULTI-PURPOSE, HIGH STRENGTH, FIBRE-REINFORCED, PATCHING AND REPAIR MORTAR

Composition:- Polymer containing cementitious mortar with different additives and synthetic fibres

MORE DESCRIPTION 

Sika MonoTop®-615 HSF SA is a cementitious, synthetic fibre reinforced, silica fume and polymer containing,
one-component repair mortar.
Suitable for use in hot and tropical climatic conditions.

USES

Sika MonoTop®-615 HSF SA can be used for cosmetic
or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications.

CHARACTERISTICS / ADVANTAGES

▪ Easy to mix, apply and finish
▪ Good adhesion
▪ Shrinkage compensated
▪ Compatible with the properties of typical concretes
▪ Low water absorption, but vapour permeable
▪ Non corrosive
▪ Excellent chloride and carbonation resistance
▪ Fibre reinforced
▪ High strength

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/b/sika_monotop_-615hsfsa.pdf

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “Sika MonoTop®-615 HSF SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings   CHARACTERISTICS / ADVANTAGES  ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use   Packaging 20, 40 kg bag   For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: $15.31.Current price is: $14.69.Add to cart

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun   For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: $76.40.Current price is: $75.60.Add to cart

Sika Antisol® WB

CURING COMPOUND, PRIMER, SEALER AND SURFACE HARDENER FOR FRESHLY LAID CONCRETE Composition:- Aqueous solution of acrylic copolymer dispersion   DESCRIPTION Sika® Antisol® WB is a ready to use, solvent free, water based liquid curing compound for preventing the evaporation of mixing water in concrete. It is ready for use and simple to apply. Suitable for use in hot and tropical climatic conditions. USES Sika® Antisol® WB can be applied on site and in precast plants. It has been specially developed for use as a high quality curing and sealing compound for interior or exterior applications. Sika® Antisol® WB is suitable for all kinds of concrete, horizontal and vertical applications and large areas of exposed concrete, such as: ▪ Highways ▪ Runways and taxiways ▪ Aprons and hard standings ▪ Roof decks ▪ Pre-stressed beams and piers ▪ Irrigation canals / channels CHARACTERISTICS / ADVANTAGES  Sika® Antisol® WB has the following characteristics: ▪Reduces incidence of plastic cracking ▪Forms stable film on the surface to provide excellent curing and sealing properties ▪ Ensure achievement of desired strengths, minimize shrinkage ▪ Alleviates other costly methods such as Hessian – watering ▪ Increases frost resistance ▪Reduces dusting. Seals, primes and hardnens cement based compositions ▪ Non-flammable, non-toxic and non-staining ▪Considerable reduction in loss of water from concrete ▪ Cured film acts as primer between concrete surface and coating material Packaging 20 L cans 200 L drums

Original price was: $319.45.Current price is: $308.80.Add to cart

Sikafloor®-100 Level SA

Sikafloor®-100 Level SA POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELING COMPOUND FOR 2-10 MM. Sikafloor®-100 Level SA is a one part, polymer modified, pumpable, self-levelling, fast hardening cementitious underlayment for the levelling and smoothening of interior floors prior to the application of the final floor finish.   Suitable for use in hot and tropical climate conditions. Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Usage Sikafloor®-100 Level SA can be applied manually or by pump to level floors at a thickness between 2 and 10 millimeter, prior to the subsequent finishing with ceramic or stone tiles, linoleum, PVC sheet, wood flooring or carpets etc. Levelling of both large and small surfaces Typical uses are in commercial, residential and domestic properties etc.   Sikafloor®-100 Level SA is particularly suitable for the subsequent application of floor coverings using products from the Sikabond® elastic bonding range,tiling mortars from the SikaCeram® range or Sikafloor range under foot traffic.   Advantages Fast application because of the good flow and cohesion of the fresh product Easy to place by pump or manual application Low tension Good bond and compaction Fast hardening and quick drying Packaging 25 kg bags

Original price was: $18.63.Current price is: $16.77.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
2 $323.97
Select your currency
USD United States (US) dollar
SAR Saudi riyal
2
  • Item added to cart
2
Your Cart
SikaRep® Fine SA 25Kg
Price: $15.17
- +
$15.17
Sika Antisol® WB
Price: $308.80
- +
$308.80
Have a Promo Code?
Subtotal $323.97
Continue Shoppingمعاينة السلهانهاء الطلب
    Apply Coupon