Sale!

Sika AnchorFix®-2+ Tropical

Original price was: $22.89.Current price is: $22.36.

118 in stock

Category:

Description

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS

MORE DESCRIPTION

Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions.

USES

Sika AnchorFix®-2+ Tropical may only be used by experienced professionals.
As a fast curing anchoring adhesive for all grades of:
▪ Rebars / reinforcing steel
▪ Threaded rods
▪ Bolts and special fastening systems
▪ Concrete
▪ Solid masonry
▪ Steel
Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface
staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation
of possible substrates, particularly in terms of
strength, composition and porosity:
▪ Hard natural stone
▪ Solid rock

▪Component A : Component B = 10 : 1 by volume

CHARACTERISTICS / ADVANTAGES

▪ Fast curing
▪ Standard guns can be used
▪ Medium to high load capacity
▪ ETA Approval available
▪ Suitable for cracked concrete
▪ Drinking Water certified
▪ LEED Attestation available
▪ Non-sag, even overhead
▪ Styrene-free
▪ Low odour
▪ Low wastage

APPROVALS / CERTIFICATES

▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020,
certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking.
▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of
Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020,
certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking
▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543

Packaging

300 mL standard cartridge                                                        12 cartridges per box
Pallet: 75 boxes

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Additional information

Weight 0.300 kg

Reviews

There are no reviews yet.

Be the first to review “Sika AnchorFix®-2+ Tropical”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaFloor -264

2-PART HIGH PERFORMANCE , SOLVENT FREE , RESIN BASE EPOXY COATING   DESCRIPTION Sikafloor®-264 is a two part coloured epoxy resin. "Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals)" USES Sikafloor®-264 may only be used by experienced professionals. Sikafloor®-264 is used as: ▪Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps. ▪ Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry ▪ Suitable to be used in different industrials such as Food & Beverage , Pharmaceuticals , Clean Rooms , Power Stations and Water plants . ▪ Mechanical rooms and Storage areas in adminstration buildings , exhibition halls and showrooms .   CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Liquid proof ▪ Gloss finish ▪ Slip resistant surface possible ▪ Dust Proof   Packaging Ready for use pre-proportioned units at 15 kg (A+B).   For more information https://industry.sika.com/content/dam/dms/eg01/1/sikafloor_-264.pdf  

Original price was: $216.96.Current price is: $207.64.Add to cart

Sikadur® PF

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair   CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance   Packaging Part A:                   4 kg container Part B:                   2 kg container (A + B)                  6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Original price was: $59.63.Current price is: $55.90.Add to cart

Sikadur®-32 Hi-Mod

HIGH-MODULUS, HIGH-STRENGTH, EPOXY BONDING/GROUTING ADHESIVE Chemical Base:- 100 % epoxy   PRODUCT DESCRIPTION Sikadur®-32 Hi-Mod is a multi-purpose, 2-component, 100 % solids, moisture-tolerant structural epoxy adhesive. It conforms to the current ASTM C-881 Types I, II, and V, Grade 2, Class C and AASHTO M-235 specifications. USES Sikadur®-32 Hi-Mod may only be used by experienced professionals. Bond fresh, plastic concrete to hardened concrete and steel. ▪Grout horizontal cracks in structural concrete and wood by gravity feed. ▪ Machinery and ‘robotic’ base-plate grout. ▪Structural adhesive for concrete, masonry, metal, wood, etc CHARACTERISTICS / ADVANTAGES ▪ High-strength bonding/grouting adhesive. ▪ Tolerant to moisture before, during and after cure. ▪ Excellent adhesion to most structural materials. ▪ Convenient easy-to-mix ratio A:B = 1:1 by volume. ▪ Easy-to-use for bonding/grouting applications. ▪ Fast initial set; rapid gain to ultimate strengths. ▪ USDA-certified for use in food plants.   For more information https://usa.sika.com/content/dam/dms/us01/7/pds-cpd-Sikadur32HiMod-us.pdf

Original price was: $97.17.Current price is: $93.17.Add to cart

SikaFloor -359 BH RAL 7040

2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT Composition OF Polyurethane DESCRIPTION Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-359 BH may only be used by experienced professionals. Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring ▪ Particularly suitable for car park decks, ramps and warehouses etc.   CHARACTERISTICS / ADVANTAGES ▪ Tough-elastic ▪ UV resistant ▪ Good mechanical and chemical resistance ▪ Watertight ▪ Non-yellowing ▪ Easy application ▪ Slip resistant surface possible ▪ Easy to clean and maintain   Packaging Part A:                    16.5 kg containers Part B:                    3.5 kg containers Part A + B:              20.0 kg ready to mix units

Original price was: $306.14.Current price is: $298.49.Add to cart

Home Category Products My account
6 $1,438.07
Select your currency
USD United States (US) dollar
6
  • Item added to cart
6
Your Cart
SikaLatex 200 Liter
Price: $581.67
- +
$581.67
Sikalastic® WR
Price: $129.11
- +
$129.11
Sikadur®-42 MP Slow 140Kg
Price: $393.99
- +
$393.99
Sikadur 504 Aggregate
Price: $12.25
- +
$12.25
Sika Antisol® WB
Price: $308.80
- +
$308.80
Sikadur 507 Aggregate
Price: $12.25
- +
$12.25
    Apply Coupon