Sale!

Sika AnchorFix®-2+ Tropical

Original price was: $22.89.Current price is: $22.36.

118 in stock

Category:

Description

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS

MORE DESCRIPTION

Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions.

USES

Sika AnchorFix®-2+ Tropical may only be used by experienced professionals.
As a fast curing anchoring adhesive for all grades of:
▪ Rebars / reinforcing steel
▪ Threaded rods
▪ Bolts and special fastening systems
▪ Concrete
▪ Solid masonry
▪ Steel
Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface
staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation
of possible substrates, particularly in terms of
strength, composition and porosity:
▪ Hard natural stone
▪ Solid rock

▪Component A : Component B = 10 : 1 by volume

CHARACTERISTICS / ADVANTAGES

▪ Fast curing
▪ Standard guns can be used
▪ Medium to high load capacity
▪ ETA Approval available
▪ Suitable for cracked concrete
▪ Drinking Water certified
▪ LEED Attestation available
▪ Non-sag, even overhead
▪ Styrene-free
▪ Low odour
▪ Low wastage

APPROVALS / CERTIFICATES

▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020,
certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking.
▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of
Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020,
certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking
▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543

Packaging

300 mL standard cartridge                                                        12 cartridges per box
Pallet: 75 boxes

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Additional information

Weight 0.300 kg

Reviews

There are no reviews yet.

Be the first to review “Sika AnchorFix®-2+ Tropical”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaSwell® A

SikaSwell® A Hydrophilic swellable joint sealing profiles SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures.  Highly economical joint sealing solution  Unique properties fill small cracks and voids  Versatile solution for joints and details  Permanently water resistant (wet & dry cycles)  Resistant to various chemical substances  Easy and fast to apply Usage Joint sealing: Construction joints Pipe and steel work penetrations through walls and floor slabs Around all types of penetrations and connection joints Construction joints in cable ducts   Advantages Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Can be applied on different substrates BBA system approvals with SikaSwell S-2 Available in different sizes  

Original price was: $70.55.Current price is: $66.55.Add to cart

SikaFloor -359 BH RAL 7040

2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT Composition OF Polyurethane DESCRIPTION Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-359 BH may only be used by experienced professionals. Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring ▪ Particularly suitable for car park decks, ramps and warehouses etc.   CHARACTERISTICS / ADVANTAGES ▪ Tough-elastic ▪ UV resistant ▪ Good mechanical and chemical resistance ▪ Watertight ▪ Non-yellowing ▪ Easy application ▪ Slip resistant surface possible ▪ Easy to clean and maintain   Packaging Part A:                    16.5 kg containers Part B:                    3.5 kg containers Part A + B:              20.0 kg ready to mix units

Original price was: $306.14.Current price is: $298.49.Add to cart

Sikadur®-42 MP Slow 140Kg

3-PART, MULTI PURPOSE EPOXY GROUTING SYSTEM Composition:- Epoxy resin DESCRIPTION Sikadur®-42 MP Slow is a three-component, multipurpose, moisture tolerant, epoxy grouting system. Suitable for use in hot and tropical climatic conditions. USES Sikadur®-42 MP Slow may only be used by experienced professionals. High-strength grouting and fixing of: ▪ Starter bars ▪ Anchors ▪ Fasteners ▪ Tie rods ▪ Crash barrier posts ▪ Fence and railing posts ▪Under-grouting and bedding of: 1- Base plates 2- Machine bases, seat base-plates for light and heavy 3- Machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. ▪ Bridge bearings ▪ Mechanical joints (i.e. road/bridge/deck types etc.) ▪Sleeper-less, direct rail fixing: ▪ Crane tracks ▪ Light rail and permanent way in tunnels ▪ Light rail and permanent way over bridges CHARACTERISTICS / ADVANTAGES ▪ High early strength ▪ Ready-to-mix, pre-batched units ▪ Moisture tolerant ▪ Non-shrink ▪ Corrosion and chemically resistant ▪ Stress and impact resistant ▪ High compressive strength ▪ High vibration resistance ▪ Low coefficient of thermal expansion APPROVALS / CERTIFICATES ▪ Testing according to EN 1504-6.   For more information https://gcc.sika.com/content/dam/dms/gcc/f/sikadur_-42_mp_slow.pdf

Original price was: $425.94.Current price is: $393.99.Add to cart

Sikadur®-32 Hi-Mod

HIGH-MODULUS, HIGH-STRENGTH, EPOXY BONDING/GROUTING ADHESIVE Chemical Base:- 100 % epoxy   PRODUCT DESCRIPTION Sikadur®-32 Hi-Mod is a multi-purpose, 2-component, 100 % solids, moisture-tolerant structural epoxy adhesive. It conforms to the current ASTM C-881 Types I, II, and V, Grade 2, Class C and AASHTO M-235 specifications. USES Sikadur®-32 Hi-Mod may only be used by experienced professionals. Bond fresh, plastic concrete to hardened concrete and steel. ▪Grout horizontal cracks in structural concrete and wood by gravity feed. ▪ Machinery and ‘robotic’ base-plate grout. ▪Structural adhesive for concrete, masonry, metal, wood, etc CHARACTERISTICS / ADVANTAGES ▪ High-strength bonding/grouting adhesive. ▪ Tolerant to moisture before, during and after cure. ▪ Excellent adhesion to most structural materials. ▪ Convenient easy-to-mix ratio A:B = 1:1 by volume. ▪ Easy-to-use for bonding/grouting applications. ▪ Fast initial set; rapid gain to ultimate strengths. ▪ USDA-certified for use in food plants.   For more information https://usa.sika.com/content/dam/dms/us01/7/pds-cpd-Sikadur32HiMod-us.pdf

Original price was: $97.17.Current price is: $93.17.Add to cart

Home Category Products My account
2 $201.26
Select your currency
USD United States (US) dollar
2
  • Item added to cart
2
Your Cart
Sikadur 504 Aggregate
Price: $12.25
- +
$12.25
1+ shoppers have bought this
SikaFloor -264 SG
Price: $189.01
- +
$189.01
    Apply Coupon