SikaFloor -359 BH RAL 7040

Name: SikaFloor -359 BH RAL 7040 - Sika Building trust
Price: 1121.25 SAR
Availability: InStock

Original price was: ر.س1,150.00.Current price is: ر.س1,121.25.

5 in stock

Category: epoxy flooring

Description

2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT

Composition OF Polyurethane

DESCRIPTION

Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes.
Suitable for use in hot and tropical climatic conditions.

USES

Sikafloor®-359 BH may only be used by experienced professionals.

Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring

Particularly suitable for car park decks, ramps and warehouses etc.

CHARACTERISTICS / ADVANTAGES

Tough-elastic
UV resistant
Good mechanical and chemical resistance
Watertight
Non-yellowing
Easy application
Slip resistant surface possible
Easy to clean and maintain

Packaging

Part A: 16.5 kg containers
Part B: 3.5 kg containers
Part A + B: 20.0 kg ready to mix units

Related products

Sika AnchorFix®-2+ Tropical

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel Threaded rods Bolts and special fastening systems Concrete Solid masonry Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: Hard natural stone Solid rock Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES Fast curing Standard guns can be used Medium to high load capacity ETA Approval available Suitable for cracked concrete Drinking Water certified LEED Attestation available Non-sag, even overhead Styrene-free Low odour Low wastage APPROVALS / CERTIFICATES Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge 12 cartridges per box Pallet: 75 boxes For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Original price was: ر.س86.00.Current price is: ر.س84.00.Add to cart

Sikadur 506 Aggregate

Selected grades of quartz sand for special flooring application and a filler for the preparation of industrial coatings are added as a supporting compound to SIKAFLOOR products. Sikafloor® - 161 Sikafloor® - 264 product characreristics 0.01 – 1.2 mm Grading 1.8 kg/Lt Bulk Density 25 kg bag Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf

Original price was: ر.س51.75.Current price is: ر.س46.00.Add to cart

SikaFloor -263 SL

SELF-SMOOTHING PIGMENTED EPOXY RESIN FOR FLOORING APPLICATION Epoxy material consisting of three compounds (sikadur 504 + B + A) at a rate of (25:1:1) free of solvents to give self-leveling colored floors Sikafloor®-263 SL is a two part (filler supplied separately), self-smoothing, pigmented, epoxy resin for flooring application. Suitable for use in hot and tropical climatic conditions. Product use and characteristics The thickness ranges from 1.5 mm to 5.0 mm on industrial floors that are subject to relatively heavy loads. Food, drug and chemical factories Electricity and water stations Laboratories and rooms exposed to radiation Exhibitions, presentation rooms, training and assembly halls Hard surfaces such as concrete and mortar Maintenance workshops Warehouses Garages and car parks hangars production areas Water and liquid insulator High compressive strength Solvent-free and non-flammable Economical and easy to apply, clean and maintain Highly fillable Good chemical and mechanical resistance Easy application Liquid proof Gloss finish Slip resistant surface possible Sikafloor®-263 SL is used as self-smoothing system for concrete and cement screeds with medium to heavy wear, e.g. for: Storage warehouses Assembly halls Maintenance workshops Garages and car parks Loading bays Aircraft hangars Plant rooms Clean rooms Production areas Dry food processing plants Pharmaceutical manufacturing For more information https://gcc.sika.com/content/dam/dms/gcc/x/sikafloor_-263_sl.pdf

Original price was: ر.س815.00.Current price is: ر.س780.00.Add to cart

Sikadur 509 Aggregate

Selected grades of quartz sand for the application of special floors and a filler for the preparation of industrial coatings, to be added as a supporting compound for Sikafloor and Sikaguard products. Sikafloor® - 161 Sikafloor® - 264 Sikafloor® - 264 SG product characreristics 0.7 – 1.2 mm Grading 1.5 kg/Lt Bulk Density 25 kg bag Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf To return to List Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit

Original price was: ر.س51.75.Current price is: ر.س46.00.Add to cart