Sale!

SikaTop Armatec -110 EpoCem

Original price was: ر.س287.00.Current price is: ر.س284.00.

5 in stock

Description

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION

Composition:- Portland cement, epoxy resin, selected aggregates and additives

DESCRIPTION

▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection.
▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7.
▪Suitable for use in hot and tropical climatic conditions.

USES

Suitable for control of anodic areas (Principle 11,
method 11.1 EN 1504-9)
▪ Suitable in concrete repair as corrosion protection for
reinforcement.
▪ Suitable as a bonding primer on concrete and mortar

CHARACTERISTICS / ADVANTAGES

▪Contains EpoCem® technology – improved bonding agent
▪ Extended open times for repair mortars
▪ Compatible with most Sika® repair mortars
▪ Excellent adhesion to concrete and steel
▪ Contains corrosion inhibitor
▪Certified for application under dynamic load conditions
▪ Good resistance to water and chloride penetration
▪ High shear strength
▪ Long pot life
▪ Easy to mix
▪ Can be brushed on or applied using spray gun

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Additional information

Weight 20 kg

Reviews

There are no reviews yet.

Be the first to review “SikaTop Armatec -110 EpoCem”

Your email address will not be published. Required fields are marked *

You may also like…

Related products

Related products

SikaLatex 5 Liter

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE Composition:- Styrene butadiene emulsion DESCRIPTION  SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Suitable for use in hot and tropical climatic conditions. Sika latex is added to (Portland cement + quartz sand + water). USES SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications: ▪ Grouts and screeds ▪ Patch repair mortars ▪ Mansonry mortars ▪ Renders ▪ Tile adhesives CHARACTERISTICS / ADVANTAGES The main advantages of SikaLatex® are: ▪ Increased adhesion ▪ Reduced shrinkage and cracking ▪ Increased abrasion resistance ▪ Reduced permeability ▪ Improved workability ▪ User friendly ▪ Suitable on most common construction substrates SUSTAINABILITY SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Original price was: ر.س97.75.Current price is: ر.س86.25.Add to cart

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings   CHARACTERISTICS / ADVANTAGES  ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use   Packaging 20, 40 kg bag   For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: ر.س57.50.Current price is: ر.س55.20.Add to cart

(العربية) Sikafloor 270 Level 25kg

Sorry, this entry is only available in Arabic.

Original price was: ر.س70.00.Current price is: ر.س60.00.Add to cart

SikaGrout®-212

General Purpose cementitious grout Chemical Base:- Cement, selected fillers and aggregates, special additives MORE DESCRIPTION SikaGrout®-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. USES ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out CHARACTERISTICS / ADVANTAGES ▪ Easy to use (ready to mix powder) ▪Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪Blend of shrinkage-reducing and plasticizing/waterreducing agents ▪ Low heat build-up ▪Excellent for pumping: does not segregate, even at high flow. ▪No build-up on equipment hopper ▪ Superior freeze/thaw resistance ▪ Resistant to oil and water APPROVALS / STANDARDS ▪ Meets ASTM C-1107 (Grade C) Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout®-212 is USDA certifiable   Packaging 50 lb (22.7 kg) bag   For more information https://usa.sika.com/content/dam/dms/us01/o/sikagrout_-212.pdf

Original price was: ر.س50.00.Current price is: ر.س46.00.Add to cart

Home Category Products My account
0 ر.س0.00
Select your currency
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon