0
ر.س0.00
Original price was: ر.س750.00.ر.س690.00Current price is: ر.س690.00.
100 in stock
Related products
SikaSwell® A Hydrophilic swellable joint sealing profiles SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Usage Joint sealing: Construction joints Pipe and steel work penetrations through walls and floor slabs Around all types of penetrations and connection joints Construction joints in cable ducts Advantages Highly economical joint sealing solution Unique properties fill small cracks and voids Versatile solution for joints and details Permanently water resistant (wet & dry cycles) Resistant to various chemical substances Easy and fast to apply Can be applied on different substrates BBA system approvals with SikaSwell S-2 Available in different sizes
Original price was: ر.س265.00.ر.س250.00Current price is: ر.س250.00.Add to cart
EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance Packaging Part A: 4 kg container Part B: 2 kg container (A + B) 6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf
Original price was: ر.س224.00.ر.س210.00Current price is: ر.س210.00.Add to cart
Selected grades of quartz sand for special flooring application and a filler for the preparation of industrial coatings are added as a supporting compound to SIKAFLOOR products. Sikafloor® - 161 Sikafloor® - 264 product characreristics 0.01 – 1.2 mm Grading 1.8 kg/Lt Bulk Density 25 kg bag Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf
Original price was: ر.س51.75.ر.س46.00Current price is: ر.س46.00.Add to cart
2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT Composition OF Polyurethane DESCRIPTION Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-359 BH may only be used by experienced professionals. Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring ▪ Particularly suitable for car park decks, ramps and warehouses etc. CHARACTERISTICS / ADVANTAGES ▪ Tough-elastic ▪ UV resistant ▪ Good mechanical and chemical resistance ▪ Watertight ▪ Non-yellowing ▪ Easy application ▪ Slip resistant surface possible ▪ Easy to clean and maintain Packaging Part A: 16.5 kg containers Part B: 3.5 kg containers Part A + B: 20.0 kg ready to mix units
Original price was: ر.س1,150.00.ر.س1,121.25Current price is: ر.س1,121.25.Add to cart
Here a brief introduction about the company is written and entered through the control panel
All Rights reserved Sika @2022 ا
Reviews
There are no reviews yet.