Main Menu

0 Wishlist
0 ر.س0.00
Sale!

SikaLatex 200 Liter

Original price was: ر.س2,250.00.Current price is: ر.س2,185.00.

7 in stock

Category:

Description

WATER RESISTANT BONDING AGENT AND MORTAR ADMIXTURE

Composition:- Styrene butadiene emulsion

DESCRIPTION 

SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and
high quality site-mix mortars.
Suitable for use in hot and tropical climatic conditions.

Sika latex is added to (Portland cement + quartz sand + water).

USES

SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications:
▪ Grouts and screeds
▪ Patch repair mortars
▪ Mansonry mortars
▪ Renders
▪ Tile adhesives

CHARACTERISTICS / ADVANTAGES

The main advantages of SikaLatex® are:
▪ Increased adhesion
▪ Reduced shrinkage and cracking
▪ Increased abrasion resistance
▪ Reduced permeability
▪ Improved workability
▪ User friendly
▪ Suitable on most common construction substrates

SUSTAINABILITY

SikaLatex® is certified according “Low Emitting Materials as per Al Sa’fat – Dubai Green Building Evaluation
System” by Dubai Central Laboratory (DCL) certificate No. CL17020432 PRODUCT INFORM

Additional information

Weight 200 kg

Reviews

There are no reviews yet.

Be the first to review “SikaLatex 200 Liter”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaWall 100 SA

HIGH PERFORMANCE CEMENTITIOUS LEVELING & SMOOTHENING PUTTY Polymer modified cementitious putty DESCRIPTION SikaWall®-100 SA is a cement based fine putty which provides an excellent finishing for concrete / cement plastered walls and ceiling, of different material such as brick, mortar, concrete, etc.. It is an ideal base for painting & decorative finishing in interior & exterior application. Suitable for use in hot and tropical climatic conditions. USES SikaWall®-100 SA is used as a thin levelling layer and a sealing putty on concrete, mortar and masonry surfaces. Typical applications are: ▪ Pore sealer on cementitious substrates ▪ For external and internal wall/celling smoothening ▪ Fairing coat before application of other coatings ▪ Thin smoothing layer on vertical areas in building Can be used in civil engineering construction before application of acrylic decorative & protective coatings ▪Filling putty of small bugholes ▪ Reprofiling of small defects on edges and to form decorative covings   CHARACTERISTICS / ADVANTAGES  ▪ Good bond strength on cementitious substrates ▪ Very good workability, easy to level, smooth & sand ▪ Fine finish and high scratch resistance ▪ Applicable in thick layers up to 3 mm ▪ Fast curing ▪ Reduces top coat consumption ▪ Good mechanical strength ▪ One component, easy to use   Packaging 20, 40 kg bag   For more information https://gcc.sika.com/dms/getdocument.get/8790cc48-066c-4719-9cf1-9cfcab7bd2bc/sikawall_-100_sa.pdf

Original price was: ر.س57.50.Current price is: ر.س55.20.Add to cart

Sika MonoTop®-615 HSF SA

FORMERLY KNOWN AS SIKAREP® HSF SA. MULTI-PURPOSE, HIGH STRENGTH, FIBRE-REINFORCED, PATCHING AND REPAIR MORTAR Composition:- Polymer containing cementitious mortar with different additives and synthetic fibres MORE DESCRIPTION  Sika MonoTop®-615 HSF SA is a cementitious, synthetic fibre reinforced, silica fume and polymer containing, one-component repair mortar. Suitable for use in hot and tropical climatic conditions. USES Sika MonoTop®-615 HSF SA can be used for cosmetic or structural repair of deteriorated concrete and mortar on exterior or interior, horizontal and vertical applications. CHARACTERISTICS / ADVANTAGES ▪ Easy to mix, apply and finish ▪ Good adhesion ▪ Shrinkage compensated ▪ Compatible with the properties of typical concretes ▪ Low water absorption, but vapour permeable ▪ Non corrosive ▪ Excellent chloride and carbonation resistance ▪ Fibre reinforced ▪ High strength   For more information https://gcc.sika.com/content/dam/dms/gcc/b/sika_monotop_-615hsfsa.pdf

Original price was: ر.س92.00.Current price is: ر.س86.25.Add to cart

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun   For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: ر.س287.00.Current price is: ر.س284.00.Add to cart

Sikacrete® 112

Free flowing micro-concrete for grouting and repair Mixture of Portland Cement and graded aggregates Product Description Sikacrete® 112 one component, free-flowing, high strength, cement based microconcrete with a maximum aggregate size of 5 mm. Suitable for use in tropical and hot climatic conditions.   Uses  Sikacrete® 112 used for the structural repair of deteriorated concrete.  It is ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications.  A typical application is the re-profiling of damaged concrete members, using formwork.  Also suitable for base plate grouting where thickness exceeds 75 mm.   Characteristics / Advantages  One component, requires the addition of water only  Reduced waste and risk of mixing failures  Easy to mix, apply and finish  Economical Excellent adhesion Shrinkage compensated Rapid strength development  Compatible with the properties of typical concrete  Vapour permeable High resistance to freeze/thaw cycling

Original price was: ر.س50.00.Current price is: ر.س46.00.Read more

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
0 ر.س0.00
Select your currency
USD United States (US) dollar
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping
      Apply Coupon