Sale!

SikaFloor -359 BH RAL 7040

Original price was: ر.س1,150.00.Current price is: ر.س1,121.25.

5 in stock

Category:

Description

2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT

Composition OF Polyurethane

DESCRIPTION

Sikafloor®-359 BH is a two part tough-elastic, coloured, UV resistant, non-yellowing, polyurethane seal coat for smooth and broadcasted finishes.
Suitable for use in hot and tropical climatic conditions.

USES

Sikafloor®-359 BH may only be used by experienced professionals.

Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring

▪ Particularly suitable for car park decks, ramps and warehouses etc.

 

CHARACTERISTICS / ADVANTAGES

▪ Tough-elastic
▪ UV resistant
▪ Good mechanical and chemical resistance
▪ Watertight
▪ Non-yellowing
▪ Easy application
▪ Slip resistant surface possible
▪ Easy to clean and maintain

 

Packaging

Part A:                    16.5 kg containers
Part B:                    3.5 kg containers
Part A + B:              20.0 kg ready to mix units

Additional information

Weight 20 kg

Reviews

There are no reviews yet.

Be the first to review “SikaFloor -359 BH RAL 7040”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikadur®-31 CF Slow 1.2Kg

2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing     CHARACTERISTICS / ADVANTAGES   Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance   Packaging Component A:                                  Component B:                                         A+B set 0.800Kg                                                    0.400 kg                                                   1.2        kg 4 kg                                                         2 kg                                                          6 kg 8 kg                                                          4 kg                                                        12 kg     For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_

Original price was: ر.س96.00.Current price is: ر.س86.00.Add to cart

Sikadur 506 Aggregate

Selected grades of quartz sand for special flooring application and a filler for the preparation of industrial coatings are added as a supporting compound to SIKAFLOOR products. Sikafloor® - 161 Sikafloor® - 264 product characreristics  0.01 – 1.2 mm                    Grading 1.8 kg/Lt                           Bulk Density 25 kg bag                          Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf

Original price was: ر.س51.75.Current price is: ر.س46.00.Add to cart

Sikafloor®-190 Screed

HEAVY DUTY EPOXY RESIN FLOOR SCREED Composition Epoxy resin and selected natural aggregates DESCRIPTION Sikafloor®-190 Screed is a three component solventfree mortar screed based on epoxy resins and specially graded aggregates. Suitable for use in hot and tropical and climatic conditions. USES Sikafloor®-190 Screed may only be used by experienced professionals. Sikafloor®-190 Screed is used as a non-slip and abrasion resistant epoxy resin flooring screed in applications such as: ▪ Flooring subject to moderate or heavy loading ▪ Workshop and factory floors ▪ Machine shops and warehouses ▪ Depots and loading ramps ▪ Hangars ▪ Car parks with higher anticipated load ▪ Stairs   CHARACTERISTICS / ADVANTAGES ▪ Easy and fast to apply ▪ Excellent adhesion to substrate ▪The screed may be mechanically smoothed using a plastic coated disk ▪ Non-slip, non-skid finish possible ▪ Excellent abrasion resistance ▪ High mechanical strength ▪ Permeable to water vapour ▪ Compatible with suitable Sikafloor® coatings   Packaging Component A                        2.41 kg unit Component B                        0.50 kg unit Component C                        25 kg bag

Original price was: ر.س230.00.Current price is: ر.س218.50.Add to cart

SikaFloor -264 SG

2-part High-build Solvent Free Epoxy Coating - Pigmented epoxy resin   DESCRIPTION Sikafloor®-264 SG is a two-part, high-build, solvent free, coloured epoxy resin. Suitable for use in hot and tropical climatic conditions. USES Sikafloor®-264 SG may only be used by experienced professionals. Sikafloor®-264 SG can be used as a: Roller coat for concrete and cement screeds with normal up to medium heavy wear for example storage and assembly halls, maintenance workshops, garages and loading ramps.  A broadcast system for multi-storey and underground car parks, maintenance hangars and for wet process areas, for example beverage and food industry. CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Economical ▪ Liquid proof ▪ Gloss finish ▪ High Slip resistant surface when broadcasted ▪A two-component epoxy paint (A + B), solvent-free for construction and fixation ▪A colored paint applied by roller to cement surfaces ▪Gives a flat, hardened surface ▪The concentration of the epoxy is very high ▪It is applied to the internal surfaces ▪Applied in two stages or two layers 2 ▪Primer 161 is leveled and used in heavy duty places such as: ▪Garages and ground or multi-storey car parks ▪Factories ▪Maintenance workshops and loading ramps ▪Maintenance sheds ▪Wet processing areas such as beverage, food and pharmaceutical industries ▪Mechanical rooms and storage areas in administrative buildings, halls, exhibitions and showrooms such as commercial malls ▪Economical and liquid resistant ▪Non-slip, easy to clean and maintain   For more information  https://gcc.sika.com/content/dam/dms/gcc/2/sikafloor_-264_sg.pdf

Original price was: ر.س750.00.Current price is: ر.س710.00.Add to cart

Home Category Products My account
0 ر.س0.00
Select your currency
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon