Sale!

SikaFloor -264 SG

Original price was: ر.س750.00.Current price is: ر.س710.00.

29 in stock

Category:

Description

2-part High-build Solvent Free Epoxy Coating – Pigmented epoxy resin

 

DESCRIPTION

Sikafloor®-264 SG is a two-part, high-build, solvent free, coloured epoxy resin.
Suitable for use in hot and tropical climatic conditions.

USES

Sikafloor®-264 SG may only be used by experienced professionals.

Sikafloor®-264 SG can be used as a:

Roller coat for concrete and cement screeds with normal up to medium heavy wear for example storage and assembly halls, maintenance workshops, garages and loading ramps.

 A broadcast system for multi-storey and underground car parks, maintenance hangars and for wet process areas, for example beverage and food industry.

CHARACTERISTICS / ADVANTAGES

▪ Good chemical and mechanical resistance
▪ Easy application
▪ Economical
▪ Liquid proof
▪ Gloss finish
▪ High Slip resistant surface when broadcasted

▪A two-component epoxy paint (A + B), solvent-free for construction and fixation

▪A colored paint applied by roller to cement surfaces

▪Gives a flat, hardened surface

▪The concentration of the epoxy is very high

▪It is applied to the internal surfaces

▪Applied in two stages or two layers 2

▪Primer 161 is leveled and used in heavy duty places such as:

▪Garages and ground or multi-storey car parks

▪Factories

▪Maintenance workshops and loading ramps

▪Maintenance sheds

▪Wet processing areas such as beverage, food and pharmaceutical industries

▪Mechanical rooms and storage areas in administrative buildings, halls, exhibitions and showrooms such as commercial malls

▪Economical and liquid resistant

▪Non-slip, easy to clean and maintain

 

For more information 

https://gcc.sika.com/content/dam/dms/gcc/2/sikafloor_-264_sg.pdf

Additional information

Weight 24 kg

Reviews

There are no reviews yet.

Be the first to review “SikaFloor -264 SG”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikadur 504 Aggregate

Selected grades of quartz sand for the application of special floors and a filler for the preparation of industrial coatings, to be added as a supporting compound for Sikafloor and Sikaguard products. Sikafloor® - 161 Sikafloor® - 263 product characreristics  0.08 – 0.20 mm                    Grading 1.5 kg/Lt                             Bulk Density 25 kg bag                            Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf To return to List   Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit

Original price was: ر.س51.75.Current price is: ر.س46.00.Add to cart

SikaFloor -264

2-PART HIGH PERFORMANCE , SOLVENT FREE , RESIN BASE EPOXY COATING   DESCRIPTION Sikafloor®-264 is a two part coloured epoxy resin. "Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals)" USES Sikafloor®-264 may only be used by experienced professionals. Sikafloor®-264 is used as: ▪Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps. ▪ Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry ▪ Suitable to be used in different industrials such as Food & Beverage , Pharmaceuticals , Clean Rooms , Power Stations and Water plants . ▪ Mechanical rooms and Storage areas in adminstration buildings , exhibition halls and showrooms .   CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Liquid proof ▪ Gloss finish ▪ Slip resistant surface possible ▪ Dust Proof   Packaging Ready for use pre-proportioned units at 15 kg (A+B).   For more information https://industry.sika.com/content/dam/dms/eg01/1/sikafloor_-264.pdf  

Original price was: ر.س815.00.Current price is: ر.س780.00.Add to cart

Sikadur®-42 MP Slow 140Kg

3-PART, MULTI PURPOSE EPOXY GROUTING SYSTEM Composition:- Epoxy resin DESCRIPTION Sikadur®-42 MP Slow is a three-component, multipurpose, moisture tolerant, epoxy grouting system. Suitable for use in hot and tropical climatic conditions. USES Sikadur®-42 MP Slow may only be used by experienced professionals. High-strength grouting and fixing of: ▪ Starter bars ▪ Anchors ▪ Fasteners ▪ Tie rods ▪ Crash barrier posts ▪ Fence and railing posts ▪Under-grouting and bedding of: 1- Base plates 2- Machine bases, seat base-plates for light and heavy 3- Machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. ▪ Bridge bearings ▪ Mechanical joints (i.e. road/bridge/deck types etc.) ▪Sleeper-less, direct rail fixing: ▪ Crane tracks ▪ Light rail and permanent way in tunnels ▪ Light rail and permanent way over bridges CHARACTERISTICS / ADVANTAGES ▪ High early strength ▪ Ready-to-mix, pre-batched units ▪ Moisture tolerant ▪ Non-shrink ▪ Corrosion and chemically resistant ▪ Stress and impact resistant ▪ High compressive strength ▪ High vibration resistance ▪ Low coefficient of thermal expansion APPROVALS / CERTIFICATES ▪ Testing according to EN 1504-6.   For more information https://gcc.sika.com/content/dam/dms/gcc/f/sikadur_-42_mp_slow.pdf

Original price was: ر.س1,600.00.Current price is: ر.س1,480.00.Add to cart

Sika AnchorFix®-2+ Tropical

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS MORE DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions. USES Sika AnchorFix®-2+ Tropical may only be used by experienced professionals. As a fast curing anchoring adhesive for all grades of: ▪ Rebars / reinforcing steel ▪ Threaded rods ▪ Bolts and special fastening systems ▪ Concrete ▪ Solid masonry ▪ Steel Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ▪ Hard natural stone ▪ Solid rock ▪Component A : Component B = 10 : 1 by volume CHARACTERISTICS / ADVANTAGES ▪ Fast curing ▪ Standard guns can be used ▪ Medium to high load capacity ▪ ETA Approval available ▪ Suitable for cracked concrete ▪ Drinking Water certified ▪ LEED Attestation available ▪ Non-sag, even overhead ▪ Styrene-free ▪ Low odour ▪ Low wastage APPROVALS / CERTIFICATES ▪Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR090-032534, and provided with the CE marking. ▪Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD090-036698, and provided with the CE marking ▪Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543 Packaging 300 mL standard cartridge                                                        12 cartridges per box Pallet: 75 boxes   For more information https://gcc.sika.com/content/dam/dms/gcc/0/sika_anchorfix_-2tropical.pdf

Original price was: ر.س86.00.Current price is: ر.س84.00.Add to cart

Home Category Products My account
0 ر.س0.00
Select your currency
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon