Main Menu

0 Wishlist
0 ر.س0.00
Sale!

Sikacrete®-114 SA

Original price was: ر.س67.00.Current price is: ر.س63.25.

200 in stock

Category:

Description

FREE FLOWING MICRO-CONCRETE FOR GROUTING AND REPAIR

Composition:-  Portland cement, selected fillers and aggregates, special additives.

DESCRIPTION

Sikacrete®-114 SA is a one component, free-flowing, high strength, non-shrink, cement based micro-concrete.
Suitable for use in hot and tropical climatic conditions.

USES

Sikacrete®-114 SA is used for the structural repair of deteriorated concrete.
▪ Ideal for casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications.
▪ A typical application is the re-profiling of damaged concrete members, using formwork.
▪ Suitable for base plate grouting where thickness exceeds 100 millimetre.
▪ Full depth concrete repairs on vertical and overhead surfaces when formed and poured, or formed and pumped with a concrete pump

 

CHARACTERISTICS / ADVANTAGES

▪ One component, requires the addition of water only
▪ Reduced waste and risk of mixing failures
▪ Easy to mix, apply and finish
▪ Economical
▪ Excellent adhesion
▪ Shrinkage compensated
▪ Rapid strength development
▪ Compatible with the properties of typical concrete
▪ Vapour permeable

 

 

For more information

https://gcc.sika.com/dms/getdocument.get/6257c392-cce9-415c-b5b1-635b822f768f/sikacrete-114-sa.pdf

Additional information

Weight 50 kg

Reviews

There are no reviews yet.

Be the first to review “Sikacrete®-114 SA”

Your email address will not be published. Required fields are marked *

Related products

Related products

SikaTop Armatec -110 EpoCem

BONDING PRIMER AND REINFORCEMENT CORROSION PROTECTION Composition:- Portland cement, epoxy resin, selected aggregates and additives DESCRIPTION ▪SikaTop® Armatec®-110 EpoCem® is a cementitious, epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. ▪SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7. ▪Suitable for use in hot and tropical climatic conditions. USES Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9) ▪ Suitable in concrete repair as corrosion protection for reinforcement. ▪ Suitable as a bonding primer on concrete and mortar CHARACTERISTICS / ADVANTAGES ▪Contains EpoCem® technology - improved bonding agent ▪ Extended open times for repair mortars ▪ Compatible with most Sika® repair mortars ▪ Excellent adhesion to concrete and steel ▪ Contains corrosion inhibitor ▪Certified for application under dynamic load conditions ▪ Good resistance to water and chloride penetration ▪ High shear strength ▪ Long pot life ▪ Easy to mix ▪ Can be brushed on or applied using spray gun   For more information https://gcc.sika.com/content/dam/dms/gcc/7/sikatop_armatec_-110epocem.pdf

Original price was: ر.س287.00.Current price is: ر.س284.00.Add to cart

Sika Primer -11 W+

LOW-MODULUS WEATHER SEALANT FOR CURTAIN WALL AND METAL CLADDING FACADES   DESCRIPTION Sikasil®-715 WS is a silicone-based, 1-component, UVstable, moisture curing, low-modulus elastic weather sealant. Suitable for use in hot and tropical climatic conditions. USES Sikasil®-715 WS is designed for weather proofing and sealing applications where durability under severe conditions is required. Sikasil®-715 WS is particularly suited for use as a weather sealant for curtain wall and metal cladding facades. A primer for gluing tile glue to gypsum board and cement board walls, or a primer for leveling compounds such as Sikafloor CHARACTERISTICS / ADVANTAGES  ▪ Very good weathering resistance ▪ Movement capability of ±50 % (ASTM C 719) ▪ Good adhesion to a wide range of substrates ▪ Neutral cure ▪ Low VOC content An emulsion primer to be applied to gypsum board and cement board walls before using ceramic tile glue or self-leveling compounds on floors and interior walls to mainly reduce substrate absorption and improve adhesion quality. Protect the substrate from moisture entering from the tiles Ready to use. It can be diluted with water or raw materials, depending on the rate of substrate absorption Easy to apply, you can use brush, roller or wipe Walls of hospitals, offices and corners with gypsum board and cement board Heated floors (water and electricity systems) Packaging 300 ml cartridge, 12 cartridges per box 600 ml foil pack, 20 foil packs per box     For more information https://gcc.sika.com/dms/getdocument.get/02511903-fcb6-437c-853a-378132058f17/sikasil-715-ws.pdf

Original price was: ر.س230.00.Current price is: ر.س200.00.Add to cart

SikaGrout®-114 SA

CEMENTITIOUS, SHRINKAGE COMPENSATED, GENERAL PURPOSE GROUT Composition :- Portland cement, selected fillers and aggregates, special additives   DESCRIPTION SikaGrout®-114 SA is a cementitious, free flowing, economical, general purpose, non-shrink precision grout with high ultimate strength. Suitable for use in hot and tropical climatic conditions USES SikaGrout®-114 SA is used for grouting in the following: ▪ Machine foundations ▪ Columns in pre-cast construction ▪ Concrete anchors, cavities, gaps and recesses ▪ Base plates ▪ General concrete repairs ▪ Bridge bearing pads CHARACTERISTICS / ADVANTAGES SikaGrout®-114 SA is easy to use grout requiring only the addition of water. It offers the following beneficial properties: ▪ Easy to mix ▪ Good flow characteristics ▪ Adjustable consistency ▪ High final strengths ▪ Non-corrosive and iron-free APPROVALS / CERTIFICATES Follows the CRD-C621-83-10.2 and ASTM C1107 as Type C Packaging 25 kg bag   For more information https://gcc.sika.com/content/dam/dms/gcc/w/sikagrout_-114_sa.pdf

Original price was: ر.س34.00.Current price is: ر.س32.00.Add to cart

SikaRep® Fine SA 25Kg

ONE COMPONENT, ECONOMICAL, POLYMER MODIFIED, PORE SEALER / FINISHING MORTAR Composition:- Polymer containing cementitious mortar with different additives. DESCRIPTION SikaRep® Fine SA is a cementitious, silica fume containing, polymer modified one component pore sealer and finishing mortar. Suitable for use in hot and tropical climatic conditions. USES SikaRep® Fine SA can be used as a: ▪Pore sealer / finishing mortar on cementitious substrates. ▪Thin layer rendering on horizontal and vertical areas in building and civil engineering construction, for external and internal finishing etc. ▪Levelling mortar on uneven substrates, and profiled concrete surfaces. ▪ Repair mortar to fill honeycombing pores etc. ▪Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings. CHARACTERISTICS / ADVANTAGES ▪ Easy to use ▪ Excellent workability ▪ Good mechanical strengths ▪ Can be applied by the wet-spray method ▪ Non-corrosive ▪ Adjustable consistency ▪ Economical Soft, smooth, ready-to-use repair mortar for concrete containing steam, silica and organic matter Used for filling and nesting gaps between 1 - 10 mm Polymer-modified cementitious sealant to be mixed with water, grouting mechanics, 7.5 liters per 25 kilos Closing pores and leveling different surfaces Restoration of capillary cracks and micro voids End repair works, joint joints and equal bends in concrete surfaces Homogeneous texture and resistance to mechanical stresses Can be sprayed with a vacuum gun Friendly, non-toxic and non-toxic economic Indoor and outdoor installation Vertical and horizontal

Original price was: ر.س63.00.Current price is: ر.س57.00.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
0 ر.س0.00
Select your currency
USD United States (US) dollar
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping
      Apply Coupon