Main Menu

0 Wishlist
0 ر.س0.00
Sale!

Sikadur®-42 MP Slow 140Kg

Original price was: ر.س1,600.00.Current price is: ر.س1,480.00.

20 in stock

Category:

Description

3-PART, MULTI PURPOSE EPOXY GROUTING SYSTEM

Composition:- Epoxy resin

DESCRIPTION

Sikadur®-42 MP Slow is a three-component, multipurpose, moisture tolerant, epoxy grouting system.
Suitable for use in hot and tropical climatic conditions.

USES

Sikadur®-42 MP Slow may only be used by experienced professionals.
High-strength grouting and fixing of:
▪ Starter bars
▪ Anchors
▪ Fasteners
▪ Tie rods
▪ Crash barrier posts
▪ Fence and railing posts
▪Under-grouting and bedding of:
1- Base plates
2- Machine bases, seat base-plates for light and heavy
3- Machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps,
presses, etc.
▪ Bridge bearings
▪ Mechanical joints (i.e. road/bridge/deck types etc.)
▪Sleeper-less, direct rail fixing:
▪ Crane tracks
▪ Light rail and permanent way in tunnels
▪ Light rail and permanent way over bridges

CHARACTERISTICS / ADVANTAGES

▪ High early strength
▪ Ready-to-mix, pre-batched units
▪ Moisture tolerant
▪ Non-shrink
▪ Corrosion and chemically resistant
▪ Stress and impact resistant
▪ High compressive strength
▪ High vibration resistance
▪ Low coefficient of thermal expansion

APPROVALS / CERTIFICATES

▪ Testing according to EN 1504-6.

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/f/sikadur_-42_mp_slow.pdf

Additional information

Weight 140 kg

Reviews

There are no reviews yet.

Be the first to review “Sikadur®-42 MP Slow 140Kg”

Your email address will not be published. Required fields are marked *

Related products

Related products

Sikadur®-31 CF Slow 1.2Kg

2-COMPONENT THIXOTROPIC EPOXY ADHESIVE Composition:- Epoxy resin DESCRIPTION Sikadur®-31 CF Slow is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between +25 °C and +45 °C. Suitable for use in hot and tropical conditions. USES Sikadur®-31 CF Slow may only be used by experienced professionals. As a structural adhesive and mortar for: ▪ Concrete elements ▪ Hard natural stone ▪ Ceramics, fibre cement ▪ Mortar, bricks, masonry ▪ Steel, iron, aluminium ▪ Wood ▪ Polyester, epoxy ▪ Glass As a fast setting rapid repair adhesive and mortar: ▪ Corners and edges ▪ Holes and void filling ▪ For vertical and overhead use As a joint filling and crack sealing: ▪ Joint arris repair and crack sealing     CHARACTERISTICS / ADVANTAGES   Sikadur®-31 CF Slow has the following advantages: ▪ Easy to mix and apply ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪Thixotropic: non-sag in vertical and overhead applications ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ High initial and ultimate mechanical strength ▪ Good abrasion resistance ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance   Packaging Component A:                                  Component B:                                         A+B set 0.800Kg                                                    0.400 kg                                                   1.2        kg 4 kg                                                         2 kg                                                          6 kg 8 kg                                                          4 kg                                                        12 kg     For more information https://gcc.sika.com/content/dam/dms/gcc/g/sikadur_

Original price was: ر.س96.00.Current price is: ر.س86.00.Add to cart

Sikadur® PF

EPOXY RESIN PORE SEALING AND SMOOTHING PUTTY Composition:- Epoxy resin and special fillers DESCRIPTION Sikadur® PF is a moisture tolerant, thixotropic, 2-component repair putty, based on a combination of epoxy resins and special selected high strength fillers. Suitable for use in hot and tropical conditions. USES Sikadur® PF may only be used by experienced professionals. ▪Concrete minor repairs such as honeycombing, blow holes, pin holes, etc. ▪ General smoothing / re-profiling over large areas ▪ Suitable for feather edge ▪Filling pinholes and surface sealing prior to overcoating with Sikafloor®, Sikadur® and Sikagard® product range ▪ Filling of non structural cracks, holes and voids ▪ Corners and joints edges repair   CHARACTERISTICS / ADVANTAGES Sikadur® PF has the following advantages: ▪ Easy to mix and apply ▪ High strength surface repair material ▪ Very good adhesion to most construction materials ▪ High strength adhesive ▪ Thixotropic: non-sag in vertical and overhead applications ▪ Non-shrink ▪ Different coloured components (for mixing control) ▪ No primer needed ▪ Excellent mechanical strength ▪ Impermeable to liquids and water vapour ▪ Good chemical resistance ▪ Suitable for dry and damp surfaces ▪Cost effective; consumption of subsequent coatings is reduced ▪ Excellent adhesion to concrete substrates ▪ Good abrasion and impact resistance   Packaging Part A:                   4 kg container Part B:                   2 kg container (A + B)                  6 kg ready to mix units For more information https://gcc.sika.com/content/dam/dms/gcc/e/sikadur_pf.pdf

Original price was: ر.س224.00.Current price is: ر.س210.00.Add to cart

Sikafloor®-190 Screed

HEAVY DUTY EPOXY RESIN FLOOR SCREED Composition Epoxy resin and selected natural aggregates DESCRIPTION Sikafloor®-190 Screed is a three component solventfree mortar screed based on epoxy resins and specially graded aggregates. Suitable for use in hot and tropical and climatic conditions. USES Sikafloor®-190 Screed may only be used by experienced professionals. Sikafloor®-190 Screed is used as a non-slip and abrasion resistant epoxy resin flooring screed in applications such as: ▪ Flooring subject to moderate or heavy loading ▪ Workshop and factory floors ▪ Machine shops and warehouses ▪ Depots and loading ramps ▪ Hangars ▪ Car parks with higher anticipated load ▪ Stairs   CHARACTERISTICS / ADVANTAGES ▪ Easy and fast to apply ▪ Excellent adhesion to substrate ▪The screed may be mechanically smoothed using a plastic coated disk ▪ Non-slip, non-skid finish possible ▪ Excellent abrasion resistance ▪ High mechanical strength ▪ Permeable to water vapour ▪ Compatible with suitable Sikafloor® coatings   Packaging Component A                        2.41 kg unit Component B                        0.50 kg unit Component C                        25 kg bag

Original price was: ر.س230.00.Current price is: ر.س218.50.Add to cart

Sikadur 509 Aggregate

Selected grades of quartz sand for the application of special floors and a filler for the preparation of industrial coatings, to be added as a supporting compound for Sikafloor and Sikaguard products. Sikafloor® - 161 Sikafloor® - 264 Sikafloor® - 264 SG product characreristics  0.7 – 1.2 mm                         Grading 1.5 kg/Lt                                Bulk Density 25 kg bag                               Packaging For more information click the link https://eth.sika.com/content/dam/dms/et01/f/eth-np-sikadur-aggregates.pdf To return to List   Sikadur® Aggregates https://sika-adark-sa.com/wp-admin/post.php?post=270&action=edit

Original price was: ر.س51.75.Current price is: ر.س46.00.Add to cart

Join our Mail List

Join our Mail List and get 30% discount.

Subscribe For Our Newsletter!

Here a brief introduction about the company is written and entered through the control panel

About Us

My Account

Contact Us

All Rights reserved Sika @2022 ا

Home Category Products My account
0 ر.س0.00
Select your currency
USD United States (US) dollar
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping
      Apply Coupon