Sale!

SikaCeram®-255 StarFlex LD SA

Original price was: ر.س92.00.Current price is: ر.س75.00.

143 in stock

Category:

Description

CEMENT BASED, DEFORMABLE, HIGH PERFORMANCE TILE ADHESIVE

High performance Cement base adhesive with no vertical slip and extended open time. C2TE classified according to EN 12004

Composition:- Portland cement, selected aggregates and polymers

MORE DESCRIPTION

SikaCeram®-255 StarFlex LD AE is a cement-based, high performance, polymer containing, deformable, one-pack tile adhesive. It can be used in layers up to 10 mm. SikaCeram®-255 StarFlex LD AE is suitable for setting all kind of tiles on both floors and walls, inside and outside for residential and commercial areas on heated floors, balconies, terraces and swimming pools.
Suitable for use in hot and tropical climatic conditions.

USES 

▪Suitable for bonding of high absorption ceramic tiles, earthenware, extruded and refined porcelain tiles
▪Suitable for bonding of large size tiles used in industial enviroment, wet areas, swimming pools, etc.
▪ Suitable for bathrooms, kitchens, balconies, terraces, etc.
▪ Indoor and outdoor application over concrete, cement mortars, bricks and plaster
▪ Suitable for indoor application over various types of drywalls
▪ Suitable for moisture tolerant natural stone
▪Suitable to tile directly on various Sika waterproofing products

CHARACTERISTICS / ADVANTAGES

▪ Very good adhesion
▪ Easy to mix and use
▪ Excellent workability and thixotropic consistency
▪ Water resistant
▪ Extended open time
▪ Single component system
▪ Deformable
▪ No vertical slipping
▪ Smooth application

▪7.0 to 7.5 L of water per 25 kg bag

SUSTAINABILITY

▪SikaCeram®-255 StarFlex LD AE is certified according “Low Emitting Materials as per Al Sa’fat – Dubai
Green Building Evaluation System” by Dubai Central Laboratory (DCL), certificate No. CL17020432
▪ California Department of Public Health (CDPH) Method – VOC emission test: PASS

APPROVALS / CERTIFICATES

SikaCeram®-255 StarFlex LD AE follows the main requirements of EN 12004 and ISO 13007-1 for class C2 TE S1 and main requirements of ANSI 118.15, ANSI 118.4 and ANSI 118.1

 

Packaging

25 kg bag

 

 

For more information

https://gcc.sika.com/content/dam/dms/gcc/h/sikaceram_-255_starflexldae.pdf

Additional information

Weight 25 kg

Reviews

There are no reviews yet.

Be the first to review “SikaCeram®-255 StarFlex LD SA”

Your email address will not be published. Required fields are marked *

You may also like…

Related products

Related products

SikaCeram®-102 SA 20Kg

GENERAL PURPOSE, CEMENTITIOUS TILE ADHESIVE FOR THIN BED APPLICATION FOR SMALL AND MEDIUM TILES Composition:-  Portland cement, selected aggregates MORE DESCRIPTION SikaCeram®-102 SA is one-pack premixed adhesive consisting of high resistance cements, selected silicon/quartz mineral charges and specific additives, used as thin bed tile adhesive for permanent fixing of ceramic tiles. It is ready to use with the addition of water. Suitable for use in hot and tropical climatic conditions. USES ▪ Suitable for bonding high absorption ceramic tiles ▪Indoor application without primer over concrete, cement mortars, bricks ▪ Suitable for floor and wall applications ▪ Suitable for moisture tolerant natural stone CHARACTERISTICS / ADVANTAGES Very good adhesion to most substrates (concrete, cementitious mortar, stone, bricks) ▪ Easy to mix and use ▪ Excellent workability and thixotropic consistency ▪ Single component system ▪ Minimized sagging with small format tiles APPROVALS / CERTIFICATES SikaCeram®-102 SA follows the main requirements of EN 12004 class C1 T and complies to the requirements of ANSI 118.4 for shear strength. Packaging 20, 50 kg bag     For more Information https://gcc.sika.com/content/dam/dms/gcc/z/sikaceram_-102_sa.pdf

Original price was: ر.س26.00.Current price is: ر.س23.00.Add to cart

SikaCeram®-103 Easy SA 20Kg

EASY TO APPLY TILE ADHESIVE FOR MEDIUM SIZED CERAMIC TILES Composition:- Portland cement, selected aggregates MORE DESCRIPTION  SikaCeram®-103 Easy SA is a cement-based powder adhesive to easily lay small to medium sized ceramic tiles. ▪Suitable for walls and floors ▪Inside and outside of residential properties. ▪It can be used in layers up to 10 mm thick. ▪For use in hot and tropical climatic conditions. USES SikaCeram®-103 Easy SA is suitable for bonding all kinds of ceramic tiles. SikaCeram®-103 Easy SA can be used indoors and outdoors for wall or floor applications, on the following substrate surfaces: ▪ Gypsum based substrates in dry areas ▪ Cement based substrates like concrete & renders ▪ Suitable for moisture tolerant natural stone CHARACTERISTICS / ADVANTAGES Very good adhesion to most substrates (concrete, cementitious mortar, stone, bricks) ▪ Very easy to mix and use ▪ Excellent workability and thixotropic consistency ▪ Single component system ▪ Non sagging with medium to small format tiles APPROVALS / CERTIFICATES SikaCeram®-103 Easy SA follows the main requirements of EN 12004 class C1 TE and complies to the requirements of ANSI 118.4 for shear strength.     Packaging 20 kg Bag WHITE     Fot more information https://gcc.sika.com/content/dam/dms/gcc/h/sikaceram-103-easysa.pdf

Original price was: ر.س27.00.Current price is: ر.س25.00.Add to cart

Home Category Products My account
0 ر.س0.00
Select your currency
SAR Saudi riyal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon